The Grow Awards 2026 🏆
Likes
Comments
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
27
Share
She's staying shorter, that's her genetics -good old NL. Very excited for the strain, the flower that I currently have is my favorite smelling strain ever. I hope this phenotype smells like that. It's one of those strains that you keep smelling over and over again, it just keeps luring me back with that beautiful smell.
Likes
30
Share
So far these plants have shown nothing but resilience and a will to grow I have put quite a bit of effort in but I’m sure I’m lacking in one or two spots but you would never be able to tell by the Look at the plants they seem quite happy and they are relatively patient with a new grower lol
Likes
22
Share
Seeding March 16 Germination 21-25 march 🇱🇺🌱🤩 Day 65 from seeding, flower in full progress Grow method 12/12 from seed- Sea of green Hey Growmy's, everything looks more than good to me, 2-3 women are running a bit behind, but that will be fixed by itself so let it go, yesterday I increased my ec to 1.8 and my ladys liked it as you can see, think also hanging my lights in a couple of days to 30 cm above my cutys now they are on 46 .. but more from me in a few days again 😇 ⚠️⚠️ Short info about my Humidity: as you can see my humidity sensor from my CT grow system that I have is around 80% RH, but that is not right, my humidity  is around 49-52% my sensor gets 24 hours  fully blown by my humidifier  onto the sensor no matter where I hang it because my ventilation is all around and is blown from top to bottom and a box fan lets everything circulate through the growroom so my old hygrometer is hanging in there againe and everything is fine Amnesia by & for @Superstrains Official Runtz by & for @Zamnesia Webshop came in 1 week later Sour Diesel by & for @Inseedious NL Cobalt Haze by @Sensi Seeds  & Arjans Strawberry Haze by @Greenhouse Seeds  for @Amsterdam Seed Center Under & for @Mars Hydro Factory Nutes by & for @Hy-Pro Fertilizers Soil: Atami light mix & 5mm broken puffed clay & 16mm puffed clay on the bottem of my 5.5L. pots Temp: 24,56 °C temp outside 15°C Lights: 12/12 Humidity: 49-52 % Vpd kpa: 1.3-1.4 Roots 17.50°C Ph : 6.2 Tds/ec 1.8 Water: 0.8L. p.plant  23°C CO²: No Mercy Tabs & boost bucket Nutes by Hy-Pro Fertilizers HyPro : Spraymix 0ml by 1L. HyPro : Terra vegi & bloom 4.5ml by 1L. HyPro : Rootstimulator 5ml by 1L. HyPro : Generator 0.16ml by 1L. HyPro : Epic Bloom 0.5ml by 1L. HyPro : Cal-Mag  0.8ml by 1L. Light distance: =46cm to plant = 42 cm to CTgrow sensor dimmer on 100% = 1091.5umol/m²PPDF +-10 Gear all controlled by @ctgrow 1x MarsHydro TSW3000 1x MarsHydro TSL 2000 Air Van: 900m³ Prima Klima on 45% Filter: Prima Klima 660m³ for seed& veg stage & 660m3 CanLite for bloom stage 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   Big THANKS to my lovely sponsors : Super Strains,  HyPro Fertilizers, Amsterdam Seed Center, Zamnesia, Inseedious, BTB Grow Supplies, Mars Hydro & CT Grow Systems
Likes
8
Share
@babyoda
Follow
Overdrive day!! Before start i make some good picture of this girls. We will compare after 2 weeks how buds are looks like. :)
Likes
21
Share
@BLAZED
Follow
Week 18 (30-6 tm 5-7) 30-6 Temperatuur: 31.4 graden (licht aan) 22.5 graden (licht uit) Luchtvochtigheid: 69% (hoogste) 50% (laagste) Ik heb de trichomen bekeken en heb besloten haar nog een dagje langer laten staan. Watergift: Geen. 1-7 Vandaag heb ik de trichomen opnieuw bekeken en die zien er goed uit! Veel cloudy en best wel wat amber. Ik hou echt van deze trichome foto's, echt mind blowing hoe dat er uit ziet! Dus vandaag gaat de schaar er in! 2-7 Ik heb besloten om een wet trim te doen zodat als ze droog is ze gelijk in de cure pot kan. Geloof het of niet, maar ik ben wel 12 uur lang bezig geweest om alles te knippen 😅 Op 1-7 ben ik in de middag begonnen en in de vroege ochtend van 2-7 was ik klaar. Het natte gewicht van de buds is 283 gram, en het natte gewicht van de trim is 61 gram. Ik ben nu al super tevreden met het gewicht! Dit is meer dan het dubbele aan gewicht vergeleken met mijn eerste grow. De buds zien er ook echt mooi uit. Ik schat dat het tussen de 50 en 75 gram droog gaat zijn. Ik ben benieuwd, nu een paar dagen drogen! Droogtent: Temperatuur: 23.4 graden (hoogste) 21.2 graden (laagste) Luchtvochtigheid: 59% (hoogste) 42% (laagste) 3-7 Droogtent: Temperatuur: 23.2 graden (hoogste) 21.5 graden (laagste) Luchtvochtigheid: 50% (hoogste) 41% (laagste) 4-7 Droogtent: Temperatuur: 23.1 graden (hoogste) 22.1 graden (laagste) Luchtvochtigheid: 53% (hoogste) 46% (laagste) 5-7 Na 3 dagen is ze droog genoeg om te curen. Wel heb ik iets te lang gewacht want de LV in de jar geeft nu 57% aan. Ik hoop dat dit over een dag wat om hoog gaat. Nu een paar weken curen en dan kom ik met de rook verslag 😁 Ik zal binnenkort ook even berekenen wat de gram per watt is, aangezien ik de lamp niet de gehele grow op 100% had staan. Het droge gewicht van de buds is precies 75 gram, en het droge gewicht van de trim is 19 gram. Samen maakt dat 94 gram! (De trim gebruik ik om een CBD cake of bubble hasj te maken) Ik wil iedereen bedanken voor het volgen van dit avontuur! Tot de volgende keer!
Likes
10
Share
@Ganjin
Follow
☀️ // Day 66 🍁 Chopping Day Every grow must come to an end. I can't be the only one who always gets heartbroken when chopping down the plants. I mean, for 4 months you do everything for the plants that they're having a good life. You cheer every healthy sign from them, you want them to love life and from one day to the other, you kill them. That's just sad, isn't it? I am always telling myself that they're basically become a part of us through the endocannabinoid system, so that's their afterlife, right? Haha Anyway, this was a rather stressful grow. I had major problems with the soil, I just couldn't control it. I think it's because of the Peat Free stuff I mixed in, it somehow fucked up the buffer capabilities of the soil or something like that. But that doesn't matter now, I got it under control, the buds developed perfectly but the leafs are damaged by the tips. So it's not the most beautiful plant overall but the buds are very marvelous. They have a rather unique shape, like a pyramid but with an almost flat head? And their purple hue is just breathtaking. It's a very pinkish purple which I haven't seen by myself until now. I am very happy with this genetic in that regard. But let's see how the buds really turn out. I am aiming for a 10-14 day drying period. With 55% humidty during the first 24-48h with 19 °C. I will rise the humidty to 60 % after that period until the end. In that way, I want to make sure that the critical moisture gets out in the first 1-2 days but after that it should be a very, very slow drying to preserve as much cannabinoids and terpenes as possible. Thank you so much for hanging around. I really love this community and I wish that we all stay around for many years and celebrate this beautiful hobby together. The final review will be up in about a month, so stay tuned for the harvest update! Peace, Ganjin 🌱
Likes
325
Share
Hi to all my fellow growers, friend and usual visitors. Thank you for dropping by and all the likes and comments....you are the best! I lost a week of updates because of busy life (nothing tragic ;) i will truly focus on catching up this week. So you can count on a new update in three days from today. The girls grow so fast under the excellent Mars Hydro TS 1000 that as of the day the pictures in the diary where taken (19 october) my 60x60 (2'x2") Mars hydro tent is a bit to small for them, so that day the pictures where taken I had to move them to my biger grow room ;) becouse the Blue Cheese was visibly suffering blockage to the TS1000 caused by her bigger Amnesia CBD sister. The powerful Mars Hydro TS 1000 is kept at 30 cm from the top of my plants is is running on full power. Thanks to Mars Hydro for supplying the necessary equipment for this grow.. That's it for this week folks, have a wonderful week and please come beck visit in three days time.
Processing
Likes
62
Share
Hello everybody! Here we are a week later and I’m starting to see some nice improvements and developments. This week I fed all plants pretty heavily with Recharge and Dolomite Lime (and a little Cal Mag). The plants seemed to like it, the color is really coming back to a nice shade of green instead of the pale yellow’ish green. I’m also seeing nice bud sites developing on all of the photos. My autos are doing great too. The FastBuds Blackberry is a beautiful shade of purple and the Barneys Farm NYC Diesel is nice and chunky with tons of crystals. I’m going back to my normal nutrient routine this week and think it should be fairly smooth sailing from here. One negative is I seem to have inherited some bugs from my wife. She asked me to put one of her outdoor plants in the room so it would survive the winter, well it looks like that plant was infested with bugs. The little f’ers had a feast on some of the leaves. My wife gave me the OK to toss the plant, so with the plant removed it should be fairly easy to irradiate any remaining bugs with some sticky paper. I’d like to say thank you to all who answered my question regarding recommend reading on cannabis. I’m selecting the answer for the Grow Bible by Greg Green because I was actually unaware of that one. I’m familiar with the Cervantes and Rosenthal versions but not Greg Greens. I’ll be ordering that book after I receive and finish “True Living Organics” by The Rev (should be here tomorrow). This week I have a new question for my GD friends…. CO2? I have not been using CO2 but EVERY book I read recommends using it, I’m not prepared to go out and buy a CO2 tank, regulator, etc… at this time. Has anyone ever used one of those CO2 bags? Or do you have any DIY CO2 solutions you can recommend? I’m looking forward to your answers on CO2. I’ll leave you this week with another interesting excerpt from “Marijuana Cultivation Reconsidered: The Science and Techniques For Huge Indoor Yields” by Read Spear: “I prefer to use high-pressure sodium lamps. With the exception of LED's, HPS lamps are the most efficient source of light you can buy, both in terms of light output and light spectrum. Having read nearly every book on the subject of growing pot, I feel that their authors tend to overemphasize the importance of light spectrum. You do not need to alternate between metal halides (for growth) and sodiums (for flowering). That is an oversimplification of the plant's light requirements. You may do this if you like--it certainly won't hurt--but I firmly believe that the gains are just not great enough to justify the cost of the extra MH lamp.” -Read Spear
Likes
34
Share
Zenzation is fast, very fast, filled and took color quickly and quickly volge at the end. The flowers are full, very full and seem truly succulent, the bassine shape, I spoke many times of the sides that I left then if you want high plants to take advantage of the growboxes in height Make the topping, without LSS and leave only the main line cloning the center. If instead you want a low plant you can leave side that will become very big and do some lst and fimming to keep them low and level them with the center that still weakens. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com
Likes
49
Share
Hey everyone 🤗 It's getting full of buds 😍. When you open the tent, an extreme smell of Sour Diesel wafts through the room 😍. They develop super fast, look beautiful and hardly stop :-). Next week I'll go down a bit with the Ec. I wish you a lot fun with the update, stay healthy and let it grow 🌱👌 Strain : Sour Diesel ☝️🏼😍 Genetic: Diesel x Northern Lights 👍 Vega Lights : 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lights : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡 ☝️ Soil : Canna Terra Professional + ☝️ Nutrients : Canna Terra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧
Likes
11
Share
@MrGoonai
Follow
11/21/24 Short facts: - Watered: 1 x 0.5L, 1 x 0.75L, 1 x 1.5L, 1 x 1.75L — 3.5L - VPD @ 1.4 — raised by 0.1 - Light @ 80% ~700 to 1050 PPFD - BioBizz Bio-Bloom increased to 3ml/L - BioBizz Bio-Grow increased to 3ml/L - Getting colder! At night between 18 to 19°C --------------------------------------------------------------------------------- She isn’t doing well, and her condition has worsened this week. Most of her leaves are now yellowing, with some completely dying off. I’m attempting to save her by ordering a special fertilizer designed to increase nitrogen, as well as provide magnesium and other essential minerals. I plan to feed her with it tomorrow. If that doesn’t work, I’ll have to accept that she’s dying. Unfortunately, she has also lost some of her fruity aroma, and the smell is no longer as strong... I’ve seen reports from other growers about the AvT, showing cases of senescence, but it usually occurred only toward the very end. So, we’ll see if this is just a phenotype with an unusually early onset of senescence. She’s definitely harder to grow than I initially expected. Since the weather is getting quite cold for the region - and we’ve already had a bit of snow - the cellar where my grow tent is set up is cooling down, with nighttime temperatures dropping to 18–19°C. Therefore, I’ve ordered some heat mats, which should arrive tomorrow. I’m aiming to stabilize the root temperature at around 22°C consistently, so the nights won’t be too cold anymore. I’ll go into more detail in next week’s update.
Processing
Likes
1
Share
@Esebees
Follow
Las plantas ya se ven mejor, han crecido bastante bien, aunque la Runtz#1 parece ir peor
Likes
8
Share
Smells nice grow slower than cashcow but smells very fruity & sweet 🍒🍬i fall in love with this strain anesia got really 1st class seeds
Likes
50
Share
@Hou_Stone
Follow
👋 Here I am with 5 Nori cake seedlings, I want to grow 3 plants of this variety, I will keep the prettiest seedlings and continue the adventure with them🙏🌲 After a short week of growth I place my seedlings in their final 7Liters pot with a mixture that I made. I use unfertilized soil as a base. And I add organic nutrients from GreenHouseFeeding that I mix at the top of the pot (35Grams BioGrow 14Grams Biobloom) Then I water each pot with 1L of water. I use tap water. I lower the pH and sometimes add a little BioEnhancer😘 My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/ ------------------------------------------ Equipment used : Light FC3000 Mars hydro. power 25% at 30cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h No other fan this week Heating mat Romberg 95x95cm. ON half an hour every hour 👌 ☄️🌠🌠🌠🌟 Have a nice day buddies, thanks for your visit 🤩👋
Likes
23
Share
Flowering Day 2: Hope the video shows them well enough. These girls are amazing growers. #1 has gone big with the stretch. i expect her to be the best yield. #2 and 4 are more squat in structure so lean on the indica side i think. #3 is similar in height to 1 but is nowhere near as big. Now the stretch is done i can plan the day 7 defol and strip out of all the small whispy rubbish that will just steal nutes and energy away from the worthy ones. i plan to keep some lower fans without their buds to give extra photosynthesis to assist the others.
Likes
17
Share
@Elpakkio
Follow
Today I’m very sad Guys I understand where was the my mistake! I not use the definitive pots whit this plant! I think will By good aniway becouse is still healthy but the grow is stop! If some one have a same experience please say the your experience by comment
Likes
14
Share
D50/F06 - 20/05/23 - Nothing to report D51/F07 - 21/05/23 - Added water and nutes EC=1.1 pH=5.7 D52/F08 - 22/05/23 - Nothing to report D53/F09 - 23/05/23 - Added water. EC=1.1 pH=6.4 D54/F10 - 24/05/23 - Added water and nutes EC=1.0 pH=6.3 D55/F11 - 25/05/23 - Start the week out. I set up a system to feeding Nora during my stay out (I'll take some picture about...) D56/F12 - 26/05/23 - I leave today, 1 week away
Likes
35
Share