The Grow Awards 2026 🏆
Likes
Comments
Share
@AustinRon
Follow
OG 4Q24 Seedling Bolt III Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Dec 25, 2024 CR2 4Q24 1:B:1:1] End of Week: [Tue Dec 31 , 2024 CR2 4Q24 7:B:1:7] OrangeGasm Fertigation: Max EC: [ 2.4, mS] _______________________________________ Week’s Objectives: - IFF We’re still HAND WATERING, ADD First Resin Bloom to Full @ 4ml/gal. - We can’t replace RLA’s Carbon Component with/out ~300 ml/Gal Ful-Power (Fulvic Acids) We WON’T be doing that. Rather, we’ll see a diminution of Carbon provided, look for 3-5 days to stabilize after switch to auto-irrigation. EC Starting Water: ec: 0.0 mS/cm, pH: ~7  __ Wed Dec 25, 2024 # Christmas Day OG 4Q24 15:B:2:1 Watered late tonight (~2200). - NO RUNOFF - Barely the beginning of Burnt Tips - Grew 2” overnight - raised light 2”, Canopy Distance is 19.5 @ 77% (770 ppfd) After Watering - With REDUCED Light, Plants are FRISKY Leaves raised (but no fingers in light sockets) - # We’ve got Pistils (Noted Yesterday) - Ceasing Foliar . . . IT’s been good. ;-} Runoff: NO RUNOFF Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml]  Standardizing Lighting __ Thu Dec 26, 2024 # BOXING DAY OG 4Q24 16:B:2:2 Scotoperiod: [ 12, h] EC: [ 2.4, mS/cm] Temp: [ 79, °F] RH: [ 68, %] VPD: [ 0.85, kPa] NOTE: If we’ve no runoff today, Water AGAIN at Midnight, Install Auto-Fertigation Tomorrow Raised Light 6 Clicks - Grew 2” Overnight - Light Distance ~20” @1900 - Fertigation Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml] IPM: - [x] Zymes Bomb - Top to Bottom, including Airpot Sides.
Foliar DRENCH w/ Zymes at 1:31 water dilution. Drenched top and bottom of leaves, stems, JOINTS, Coco Top, and spraying down ALL Airpot Side Holes, and BOTTOM OF AIRPOT. Letting the girls run up to 82°F, RH @ 69%, VPD ~9. Plants are HAPPY w/ EC: 2.4, w/ Moderate High Lighting (~770) If they’re happy before lights out, and I know it - Let’s raise light to 80% (800 µMol/m2/s), adjust airflow for overnight Temp (Humidity Down). And call it a night. After Raising light to 83%, REDUCED again to 77% @0600 __ Fri Dec 27, 2024 OG 4Q24 17:B:2:3 Runoff: [ 500, ml], EC: [ 1.7, mS/cm] Raised Light 6 Clicks (Grew 1.5” Last Night). Light Distance back to ~20” 1.5 Gal fertigation - let’s do 1900 & 1200  Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] After 2:30 Feeding - Raised light to 83% __ Sat Dec 28, 2024 OG 4Q24 18:B:2:4 Temp: [ 82, °F] RH: [ 68, %] VPD: [ 0.96, kPa] Light Distance: [ 19.5, “] Fertigation: RLA Heavy, Flower Week 3; EC: 2.4 Notes: - Evaluate 83% Dimmer at Lights On - Back off to 77% if any indication of Light Stress - Let’s ramp to EC: 2.7 mS As max. Beyond here, we probably don’t have sufficient CO2. Light Intensity (IDEAL): 83% # ~830 µMol/m2/s EC: 2.4 422 ml/plant, runoff, EC 1.5. Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] 420 ml/plant op Crinkly LOWERS - EC Too High Too Fast? __ Sun Dec 29, 2024 OG 4Q24 19:B:2:5 EC: 2.3-2.4 The Max Hydro comes in at 2.36 EC. RLA Hydro Chart set 3.4. How Can Be? DROPPING SILICA SKIN from RLA Hydro (Eliminate Brown Patina, and Small Orifice Build-up) RLA Hydro  Nutrient Element Ratios ppm mS/cm NER N 262 0.5 21.8% P205 143 0.3 11.9% K20 476 1.0 39.7% Ca 214 0.4 17.9% Mg 48 0.1 4.0% S 57 0.1 4.8% Si 0 0.0 0.0% C 333 TOTAL 1533 2.4 100.0%  
RLA - Full - [x] Complete Irrigation Install Defoliation I We want to eliminate All Vegetation from TOPPED NODE (3) Down. - [ ] Count NODES FROM SPLIT - [x] Measure Plant Heights: 11 - 17” - [x] Remove Each Pot and Trim OUTSIDE OF TENT (Get it RIGHT!) - [x] Can we adjust the pot positioning to get ONE UNDER CANOPY Fan? - [x] Eliminate FANS and Growth tips NODES 1 - 3 (3 is TOP SPLIT) - [x] Eliminate FAN LEAVES from First Node of MAIN STEMS - [x] INSTALL DRIP RINGS (No Manifold, Yet) - [x] Apply LABEL to Each Plant - [ ] Consider Eliminating FAN LEAVES from Second Node of Mains _______ Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 54.1, ml] # EC: 2.4 MAX - [x] Photosynthesis Plus: [ 24, ml] - [x] Quillaja 60 Powder: [ 0.25, tsp] - [x] SLF-100: [ 15, ml] Time Set Initiate Complete Event 1 18:45 18:45:25 Event 2 20:05:00 20:05:25 Event 3 21:25:00 21:25:25 Event 4 22:45:00 22:45:25 Event 5 00:05:00 00:05:25 Event 6 01:25:00 01:25:25 Event 7 02:45:00 02:45:25 Event 8 04:05:00 04:05:25 Event 9 05:25:00 05:25:25 CHANGED TO 25 SEC EVENT (from 20) Tuesday - / / / __ Mon Dec 30, 2024 OG 4Q24 20:B:2:6 - [x] Harvest Dehu Water Continuing to RAISE LIGHT ~ 2”/day (6 Clicks of the support ratchets). Runoff: - [ 422, ml, plant!!!!] # Reduced Event duration to 20 Seconds (from 30). - [ 1.4, mS/cm] Lowering light to 70%, see if lower fans relax. They’re electric. :-). They relaxed. Inner fans surrounding apical stems are laying @ 30°, rather than Reaching for 60°. I have perhaps been overnighting. HUMIDITY IS CRANKING. It’s impossible to get VPD above ~8.3! Trying to keep humidity below 68 drives Temp below 78. I forgot about the part. ;-( Dehumidifier is ON, Doors are Closed, Room Vent is CLOSED. Dehumidifier is delivering 50%RH to the room. Orange Gasm is quickly filling the air with moisture. At MIDNIGHT, Raised light to 77% ( ~770 µMol/m2/s] pH Adjusted 2 Gallons of Filtered Tap to pH: 7.2, EC: 0.3 (Used for Dilution when refreshing reservoir with DEHU and Fresh Supplements. __ Tue Dec 31, 2024 OG 4Q24 21:B:2:7 @0630 Took a peek in the tent. SCANT RUNOFF @ 20 Sec Feed Events. JUST Touched TIPS (Burning). Bumping Fertigation Events to 25 Seconds, after Feeding 9 * 5sec (45 Sec) To bring DAYS delivery to 25 Seconds. Check Reservoir: - We’ve 4 - 5 Gallons. @LIGHTS ON - Reset Light Height - Reduce light to 73% (See if we can avoid more tip burning) Harvest Dehu: - [x] Amount: [ 5.7, l] - [x] Primer A&B: [ 27, ml] # For EC: 2.4 mS/cm, Nailed it, First Try. ;-} Orange Gasm likes to SPREAD when Topped. - Which makes her a funny candidate for SOG. ;-} 
Likes
119
Share
Well growmies ive been looking forward to the Strawberry Pie, the more she went into flower the more the frost would build up , and that's when the terps came out and they came out strong , there no stealth for this girl 👉 Stinky 👈 Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.... Definitely got the strawberry terps backed by this gassy flav 😍 Amazing 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 x3 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9👌👌
Likes
25
Share
week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
10
Share
@BodyByVio
Follow
This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless
Likes
60
Share
1 week left until i flip, the blue dream and white runtz are lagging behind but the pineapple express, and ghost train are begging for flower! day 54, and what a beautiful first grow it has been so far, these girls have responded well to all the punishment i could dish out in training and have responded with a beautiful even canopy. cannot wait to see them flower day 55, midday, lights are off for the next 36 hours to expedite the flowering process.
Likes
2
Share
Rotated the plants 180° to separate some buds on the other side. Last defoil and waiting... Some early harvest.
Likes
6
Share
Swapped blue for the red CFL. Adding 1ml bloom per litre. Few tips are yellow think its having the light too close but only time will tell. All 3 plants have entered flowering stage. Due to the small grow space the plant that is directly under the LED is growing at a faster rate compared to the plant that's under the CFL
Likes
5
Share
@Cowboy
Follow
Everything has went well this week no problems at all,lost power due to hurricane we had this week ,but had a generator to keep the lights on,I think she will go a full 12 weeks,,
Likes
11
Share
Diese Woche hat sie ihre ersten Wurzeln ausgestreckt, also erwarte ich demnächst Leistung.
Likes
7
Share
@x_grower
Follow
Last week I neglected the fertigation beyond the low humidity all that delayed the first topping and leaf burned the most thirsty girls, by the end of the week I had already recovered them and succed topping, they are looking very healthy.
Likes
61
Share
@Grey_Wolf
Follow
Sensi Seeds Jack Herer 6th week of veg completed 14th Jan 2020 Welcome back , Now even tho this girl isn't really all that impressive size wise , she is very very pretty with those Indica leaves and lush green colour. You can see where I topped her awhile back has now developed into two gorgeous Tops. I gave her a feed of some of the Dr Greenthumbs High tea i brewed up and she lapped it up as it contains everything your Soil needs to remain super healthy. That is all for this week I shall be back again next time same Bat channel 😄
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
6
Share
End of week 7 Last 2-3 days crystals/sugar leaves started appearing slowly. i have added another 125 Watt CFL for extra supplemental light . Breeder says plant needs 65-70 days from seed. Thats like 20 days more for the buds to get as big as possible. cant wait for this week to check these buds stay tuned :)
Likes
1
Share
@tigerbomb
Follow
la seconda pianta ossia quella che non era ermafrodita è stata impollinata solo nel ramo in diretto raggio del ventilatore, forse avrei potuto pensarci, comunque ho 12 semi, per il resto non ho trovato molti semi e sono soddisfatto nel complesso, la pianta non ermafrodita ha avuto un esplosione di tricomi, veramente piena, per altro le cime sembravano pesare molto, per adesso stanno seccando, di muffa ne ho trtovata poc e niente
Likes
22
Share
La pequeña ak48 esta empezando a llenarse de tricomas y empieza a desprender un olor bastante agradable y potente 🔥 Esta será la ultima semana en la que utilizaremos los productos para ir empezando a limpiar las raices de un modo mas progresivo 👌 31/10: Hemos hecho lavado de raices para prepararla en la cosecha BUENOS HUMOS 🔥
Likes
16
Share
great week. flowers are filling in. trying to figure out what the yellow is from. PH is good, its well fed. BG 2 started but stopped. the smell is incredible. Only a few weeks left!
Likes
10
Share
@la_piper
Follow
29дней Сделал дефолиацию и растянул ветки. Сегодня впервые внёс Удобрения. Жижа универсальная 1.4г/л.,бад монстр 2мл/л по листу.
Likes
18
Share
I don’t think I ever had white powdery mildew and I was just noid of every little dust particle that came around. All good. I’m now battling high temps as we don’t have central air and it’s mid 90s outside. Most likely about to buy an ac unit. LST seemed to go ok but we shall see. Overall very pleased w my results so far. Cheers
Likes
Comments
Share