Likes
9
Share
@Rizik86
Follow
Day 1 - TC600 is 36 inches from seedling. Veg 100% Flower 100% 17 hours on 7 off. PAR/PPFD 170 DLI 10.05 Day 2 - Mylar Emergency Blanket DIYed into 2 by 3 foot tent. PAR/PPFD 240 (41% increase) DLI 14.5 (44% increase) Nutrients: Advanced Nutrients 2 mL of each Micro Grow Bloom Base Nutrients and 2 mL BotaniCare CalMag. 3 Gallon bucket filled with 2 gallons of RO water. No more notes for rest of the week. The TC600 is 260w from the wall. Not 600w.
Likes
13
Share
@TPBzh
Follow
Easy to grow, smelling a lot, we'll see at the end ,hen dry, but promizing
Likes
3
Share
Will be checking trichomes 20 percent amber is awesome for me
Likes
7
Share
She's finally looking like she is close to finishing. I have cut back on watering and nutrients. She is finally exuding a wonderful fruity aroma. As you can see, she is beginning to sparkle with trichomes, both on the buds and leaves. I pruned back the remaining fan leaves in order to allow her to put all her energy into the final bud production, as well as to allow more light inside the canopy. The description said this White LSD should finish between 8 & 10 weeks. I could be wrong but, I believe she might go into the 11th week before it is time to harvest. The trichomes are approximately 20% cloudy as of today. Until next week, enjoy!
Processing
Likes
9
Share
Was out to check the plants.... both were very fine. One leaf got som yellow and brown spots on it. Pulled it of
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
6
Share
- harvest was today on day 59! (31/03/2019) - sooo bummed that she is so tiny because the frost and smell are just insane, its like fresh made orange juice - as usual harvest report will be up in 10 to 14 day when everything is dry so stay tuned
Likes
6
Share
@KivzBudz
Follow
Meine Glookies macht weiter ihr Ding. Unter den beiden top Budz bilden sich nochmal richtig schön dicke budz, die mir fast sogar noch besser gefallen wegen ihrer schönen Form. Der Geruch ist immer noch sehr fruchtig, süßlich aber auch skunky, ich Liebs. 2 Wochen noch bis zum Harvesting. 🌱 Bilder werden geupdatet.
Likes
28
Share
@GIR139
Follow
Well, I've almost made it to the finish line. Finally brought down the two KTs. Was A LOT more work than I anticipated and the magic wore off quickly! After hours and hours of trimming and some easy drying at about 73 F and 63 RH. About 8 days for the KTs, then another trim and jarred them up. Scale was acting up a bit but my count is 10.4 ounces dry between 2 plants. Happy with the yield. Am currently a little concerned that it doesn't smell like much. Didn't over dry, didn't quickly dry. In jars the RH is showing 61 or 62. Really hoping some individual character comes back to them! Will return to update smoke report. OG and Blueberry still drying.
Processing
Likes
29
Share
@Reaper
Follow
All details will be added every day/week if u have any questions feel free to ask. December 4th:starting in the winter, veg and bloom will happen under 400watt hps to keep the grow room warm. the seeds have been germinating for 2 days with the wet paper towel technique, they got root and are now in soil and the rockwool cube. for now im just waiting for the seeds to show root coming out of the rockwool, then i transplant to the netpot with clay pellets straight in the dwc, untill then they get fluorescent light (max 7 days) these are autoflowers so they get 18 or 20 hours light. nutrients General hydroponics three part :micro gro bloom and calmag water: rainwater (25ppm) i hope the room wont cool of too much when the lights go out. Day 1 (December 5) seeds start to come above the rockwool and the soil Day 2 (december 6) stems start to stretch i give them both pure rain water with 100ppm calmag when they feel dry. Day 4 (december 8) still no root visible out of the rockwool Day 5 (december 9) root visible outside of rockwool cube and transplant to the 55Liter rdwc air pumps 10l/minute Day 7 (december 11) root comes trough netpot, i lowered the water by removing 3Liters
Likes
16
Share
@BLAZED
Follow
Week (21-10 to 27-10) 21-10 Temps: 19.4 to 26.6 degrees Humidity: 47% to 66% 22-10 Temps: 18.2 to 26.5 degrees Humidity: 42% to 64% Watering: 2000 ml. There are only 1/2 weeks left before harvest, so i will stop with the nutrients and will only give her water from now. 23-10 Temps: 19.4 to 26.2 degrees Humidity: 47% to 66% 24-10 Temps: 19.2 to 26.8 degrees Humidity: 45% to 66% Watering: 2000 ml. 25-10 Temps: 19.5 to 25.9 degrees Humidity: 46% to 67% 26-10 Temps: 19.8 to 26.5 degrees Humidity: 46% to 66% 27-10 Temps: 17.9 to 26.2 degrees Humidity: 44% to 67% Watering: 2000 ml.
Likes
7
Share
No bug or disease problems. I even took her off veg nutes way too soon and she recovered like a fucking champ. I’m popping two more this week. Unfortunately i didn’t weigh it because Of some very unfortunate circumstances that I was dealing with at the time. I essentially had to vacate my premise within 24 hours. A few days after harvest. Anyways. I ended up smoking the whole thing with my friends and it was straight fire. The terps were crazy also. Super sweet. After curing she had a very sweet smell like bubblegum / grape. This was only my second harvest ever.
Likes
44
Share
Day 21, Even though i got these as a freeby, i'm happy i decided to put these among the bunch. These plants got the complete package👌Already @ Day 21 these 2 have a 👃 that just makes me happy. BTW i'm gonna up the dose P&K a bit in the next week to around EC 1.7/1.8 Rock on Growmies 🌱
Likes
Comments
Share
@Papabro2k
Follow
She smelly greet unfortunately I never took many pics she was a test run happy growing all I have not tried yet she is going into the curing process and I am not 100% sure of its sativa or indica
Likes
11
Share
Ho regolato il dimmer della lampada al 100% e distanza 30cm perché si sono allungate troppo i primi giorni. Continuo ad annaffiare solo con acqua ogni giorno con l’aiuto di uno spruzzino
Processing
Likes
16
Share
Not a lot to report this week still attempting to deacid & get my PPMs down watering straight with just Pro-TeKt added.
Likes
17
Share
This stuff packs a nice punch, one pheno showing off those cherry terps its 🔥🔥
Likes
Comments
Share
@Robom069
Follow
Day 47/48 introducing the 12/12 on high power leds on the ladies lookin good so far the black domians nmow oin the right and the acid dough on the left i think both lamps work very similar
Likes
13
Share
Almost into the home stretch. Will start looking at trichomes this week. Really hope the buds continue fattening on both the ladies. Day 58 WC - growing strong. Don't know if we should remove any leaves or leave it as is. Thinking of waiting a few days to see how the plant develops. Day 58 BCN - it's recovered from the lack of watering and the leaves are starting to turn yellow. Think that's normal for this far into flowering. Hope we can finish without further surprises. Day 61 - fed both plants and did an additional 330ml of blackstrap molasses (5ml/l). Will start moving to flush in 10 days or so. Not sure if they're ready yet. 🤦‍♂️🏼Added short videos of both ladies.