I flushed my monster plant we are starting late flowering so i wanna make sure that there is no nutrient build up. And to make sure that shes gonna end up like a Bomb. Smell is good but not too strong. So the plant is perfect i have nothing to say

in the passport of the variety itself, exactly 63 days of color are written, but still look transparent, I’ll wait until the end of the week;

Hey everyone at week 4 know and wow have these girls grown early this week I applied some LST and all took really well to say it was my first time trying this

Semana del 1 al 7 de marzo. Lo apunto aquí porque sino luego no sé ni en que semana vamos jaja 😂 Las primeras fotos y vídeo son del inicio de la semana. Hemos retrasado el cambio de una semana a otra, ya que por el lavado de raíces no las pudimos alimentar antes. Luego cambiaremos el PH a 5,8-9 y el EC también lo aumentaremos. Edito: al final no lo hemos aumentado porque respondían bien y estaban recuperándose. Respecto a la semana anterior, se ven mucho mejor después del lavado de raíces. Algunas plantas están muy bajitas, así que la luz para las más bajas está a 65 cm. Mañana o pasado aplicaré jabón potásico con aceite de neem a modo de prevención. La vez pasada, que era mi primera vez plantando, llegaron trips y al final resultó todo bien, pero si no llegan los bichos, mejor todavía

This lady is getting better every week All of her sisters are too Amazing genetics with amazing nutrients

She's in a small tent, do you think I should flip the switch? Every time I take some bottom leaves off more come back LOL. What do you think?😎

~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 12/27- Week FIVE of flower...here we gooo! I went ahead and gave her a drink of straight well water that was 73℉ and ph'd to 6.4 as her pot was getting light. I'll let her dry out tomorrow and feed her the following day as she's a hungry girl! 12/29- Today the little Zkittles auto is looking vibrant and is basically all flowers! I watered/fed her today to runoff with her usual 0.4g of well water, that has a base ppm of 100, to which I added the following Dutch Pro nutrients: Bloom 'A' & 'B' @ 10ml/g each, Explode @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g to end up with a total 1200ppm(500 scale) nutrient solution. After adding the nutrients and checking the EC (2.4 EC), I ph'd the solution to 6.4 @ 72℉ and gave her pot a turn. 12/31- Oh my! The Auto Zkittlez by Seedsman is in overdrive now, going crazy stacking her six main branches top to bottom and she's beginning to get frostier by the day now! I watered/fed her today to runoff with her usual 0.4g of well water, that has a base ppm of 100, to which I added the following Dutch Pro nutrients: Bloom 'A' & 'B' @ 10ml/g each, Explode @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g, Multi-Total @ 3.8 ml/g along with Earth Juice's Oily Can @ 5 ml/g to end up with a total 1000ppm(500 scale) nutrient solution. After adding the nutrients and checking the EC (2.2 EC), I ph'd the solution to 6.5 @ 74℉ and gave her pot a turn. 1/2- Yesterday I gave the Zkittlez just enough straight 6.5ph well water to moisten her medium and turned her pot. Today I finished out her 5th week of flower with a good watering/feed to runoff of well water, that has a base ppm of 100, to which I added the following Dutch Pro nutrients: Bloom 'A' & 'B' @ 10ml/g each, Explode @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g to end up with a total 1050ppm(500 scale) nutrient solution. After adding the nutrients and checking the EC (2.0 EC), I ph'd the solution to 6.4 @ 72℉ and gave her pot a turn. There's 58 days since this girl broke ground and five weeks of flower on the books, with another 3-4 weeks to go until she's ready, this Seedsman Zkittlez Auto is going to be EPIC!🤩❤️ See you next week! 😎🤙 ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! 💚What you grow - Grow what you💚

We’ve made it to the beginning of the week four of veg with this baby. She’s just growing stronger by the day watering her twice a day once in the morning and once in the night .

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

this lady has stayed very short but bushy , she is drinking the least out of the rest and bud production has been minimal so far , i gave her a light / last defoliation this week and she has already recovered , purely too open her up too the available light , i really do hope she very soon steps up a gear with bud production otherwise i dont think there will be very much on the scales at the end , again have had absolutely no issues with this plant at any stage and she certainly has had more than enough light on her too produce , so lets watch this space and see what she can do ,

Sehr schön geworden 👍 👌🌱 werde sie noch etwas stehen lassen.

She is getting transplanted into a 11Litr Pot

Hi Bros&Sis!! I have no time for updates the diaries, with two tent in full bloom, I'm always late for the weekly up, so please try to forgive me and enjoy the view. 😅 The video follow the growth trough the week The girls are still stretching, and they grow tall (well, some of them). With the next update I will write about the girls in details, untill then, welcome to my jungle! 😍 See ya, and thanks for follow my garden, CIAO!

Leaves started to go a little light green this last week so changed the water and added some Nitrozyme aswell as a slight mist direct to the leaves. Also had to lower the PH to 5.8 as it had crept up quite substantially at around 8.5. Other than that...Nice, healthy, bushy plants. Still a clear difference in size between the hydro and the Allmix. The netting needs changing as just can't get it taught so any recommendations appreciated. Itching to see the end result! Update 28th Feb: I think im getting a little nutrient burn on some of the leaves. Nutes have been added as per supplier directions Either that or it could be due to me spraying a little diluted Nitrozyme mix directly on the leaves a couple of days ago while the veg lights were running.

I gave the 8 Ball Kush and the Blue OG a full 9 weeks in flower , we started the trim yesterday and will finish up today , now it’s cleanup time and get the room reloaded with 8 Ball Kush and Zombie Kush, I will update next weekend on final weight.

30% indica, bagseed, amazing smell, berry, fruit punch. So sticky, beautifully cured. Was smoking immediately 2 days into jars.

So really weird , I just 2 different phen types of orange bud... because one of them is growing very very purple buds. Or ILGM sent a wrong seed..lol.. either way it's really pretty..😍 they both have a similar smell to them , very citrusy smell. Also they are thriving on the new nutrients Advanced Sensi products are amazing... I will never use Lotus ever again.