Likes
Comments
Share
Supper cropped because plant got taller than expected. Was too close to light. Tallest branches around 3 feet tall. I defoliated 2 weeks into flower. I also took clones today. Sweet gassy smell. Have light on 75% intensity since it is so close. Depending how plants respond I may just keep the intensity there.
Likes
8
Share
Week 4 of flower for Ztrawberry by Greenhouseseedco, Shes starting to dense up her flowers a bit, smell starting to come in too almost like a strawberry&cream type note for now. Getting watered every 3 days or so at this point.
Likes
3
Share
@CannaZen
Follow
A huge flush was due with the ladies maturing. I noticed large swell after this, and kinda confirms they were a bit shocked from over nutes previously. Ive got the temp nailed down with better HVAC system in the ol garage. Again, its winter....some challenges hahaha.
Likes
116
Share
@GMSgrows
Follow
First off. I DO NOT USE TERRA AQUATICA NUTRIENTS. I USE FLORANOVA GROW AND FLORANOVA BLOOM The Silver Widow is a beautifully structured girl with great resistance to the elements. She is naturally one big bush without topping her. The smells from this girl is something to behold. At times it's all you can smell throughout the entire yard. This girl makes me smile every time I look at her. Flowering time is approaching very soon. Looking forward to some sticky flowers. Thanks for the interest my friends.
Likes
4
Share
This plant is thriving in its 3rd week of vegetation—it’s growing very healthy and strong!🌱 I’ve applied some Light Stress Training (LST) to ensure all parts of the plant are receiving equal light exposure, and it’s responding beautifully. Midway through the week, I noticed the first signs of flowering! This plant is transitioning into bloom faster than expected, which is really exciting. It seems eager to show what it’s capable of. Now, I’m looking forward to seeing how it handles the stretch phase—I can’t wait to watch it shoot up and develop further.😊
Likes
21
Share
Getting frosty! Can’t wait for my next update gonna upgrade some things in the tent 🏕️!
Likes
16
Share
@osmrducks
Follow
Day 22: Honestly didn't think I would have made it this far. The girls are looking great minus a couple of issues. I have over watered them and over fed too! Not to mention trying to LST too early. I will wait a bit longer before watering this time. Day 23: MORNING - They were super dry. I have been over watering a bit so I watered maybe 1/2 gallon for all 6. I also did some more LST and took 1 large fan leaf off of each plant. I will update again before lights out. Day 23: NIGHT - The girls are responding very well to the LST. I don't think they are liking the 80°. I am starting to have issues with lower humidity again. I need to try and figure some sort of ducting out or possibly even get a small AC unit for the grow room. Day 24: MORNING - I removed a couple more leaves that were covering potential bud sites. I have also done a partial main-line on the smallest girl. It looks to be already showing pistols. I've had to open the tent with a big fan blowing directly in with the humidifier behind it. The girls were getting hot and dry. Day 24: NIGHT - Well 5 are showing to be female. The biggest plant is showing no signs of sex. I am guessing it will be the mystery seed. I will be doing no more LST to these ladies for at least a week or better. I think I have stressed them out enough the past 2 days. Day 25: These girls are very resilient!! I tortured them all weekend and the one I nopped off to do a sort of mainline grew by 20% at least. Day 26: It is the official 3 week mark today and the girls are starting to flower. I tied em down to get light to all bud sights. I will 100% not touch them unless they need it from this point!!!! They are soo small and I need not stunt them any more!! I have removed the Mystery Seed as it looks to be a male and I do not want to take the chance!! Also fed and watered today. Only 200 ppm for the feed. Day 27: Nothing new to report. These girls are gonna be tiny :| I must've stressed em too much too soon :( Looking good though I think! 💪 Day 28: I never do what I say. Dumb! Broke main stem on one of the best plants. Taking it as a lessons learned. It's been two hours and she looks SICK! Oh well.
Likes
21
Share
I started Flushing two plants as there nearing the end of there days. I'll start Flushing the others this week apart from the kalimist indica pheno as it started flowering 3 or so weeks after the others even though they were all forced together. (alkward bugger) Some of the plants are showing red /purple colours a little bit 👍
Likes
1
Share
Wet Weight: 542,76g ~543g (19,145oz) Dry Weight: 90g Dry Stems: 35,42g Dry Trim: 27,23g Wet Wight to Dry bud factor: 0,1657 = 16,57% Iam fine with the result but i know i can do it better.
Likes
20
Share
Im really pleased with how these girls are turning out, i was worried at 1st as the propagation tent they were in wasnt big enough to get good air flow so they were very small but as soon as i got them into the Homebox triangle tent that all changed and they are looking great. Fantastic strains and genetics by Anesia Seeds.
Likes
26
Share
This attack of the clones is coming along nicely. Cant wait to see this all SCROg'd out! I am going to do a few things differently this time around. I am going to deliver more foliar sprays to this group and see if it helps in growth. I also FIM'd the shit out of each top on each plant. Lets see what that does.
Likes
6
Share
11/3: Her new growth looks better, but her old foliage looks pretty rough...hope the leaves last long enough to make the energy she'll need to swell those buds... She's dry already today, but I'll water tomorrow. 11/4: I sprinkled a tablespoon of Cave Culture (bat and seabird guano) over her soil and watered it in with 1/2 gallon including humic acid, myco/tricho/beneficial bacteria, bembe, terpinator, and cal-mag. 11/5: I just ogled her and rotated her a couple times today. I removed the oscillating fan from above my lighting so that I could raise the lights several more inches, and added another oscillating fan above the lights that blows down on the plants. The one I removed is still up there too, but blowing across the LED drivers and a pair of the panels. I could still remove the ratchet hangers and just use carabiners to attach the fixture to the "ceiling" of the closet....that would give me another 5 inches of possible ceiling if I end up needing it. 11/6: I fed her about 1/3 gallon today, and went heavy on phosphorous..a heavy dose of tiger bloom, along with a normal dose of beastie bloomz, bembe, cal-mag, signal, big bloom, and a 1/3 dose of grow big. It's been raining for 24 hours and the humidity is off the charts, so I dialed up the ac infinity to come on any time it exceeds 55% RH and increased the fan speed on the floor of the closet to try and dry her out quicker than usual. 11/7: Did pretty much nothing to her today. 11/8: I collected a bunch of rainwater over the past 48 hours and gave her about 1/3 gallon including cal-mag, signal, bembe, armor si, and a little bit of tiger bloom..still seeing some signs of phosphorous deficiency. I took a bunch of photos and video while I had her out of the closet. 😍 I did a little training on her today just to get a little more light to all her branches. 11/9: I just rotated her a couple times and added a 35w 3500k light that is hitting her right in the ass..
Likes
28
Share
Beginning of week.. I raised the lights a little.. They are at 50% power at 18" (roughly) from the plants. The ladies are getting from 420 to 500 PPFD. Went ahead and fed them some extra FloraMicro this week.. I'm guessing they are just very hungry girls.. And I'm thinking the pH in the rootzone issue is not clearing up at all.. BUT.. It seems like no matter what pH I water them with.. The runoff ALWAYS comes out at 5.8 or 5.9 with the Mandarin Cookies and 5.8 or 5.7 with the ETHOS Cookies.. So if you want to reuse your coco coir.. Make sure to remove ALL the roots. The girls dont look too bad at all.. And that's why I'm guessing they just needed more nutes in the mix.. We shall see how this week goes! Mid week.. They are looking alot better! Mandarin Cookies is exploding woth growth.. ETHOS Cookies is growing slow but she is growing for sure.. I think I may need to remove a node or 2 on the ETHOS Cookies.. I could just leave it.. But the very top 2 are covering alot of tops.. I could make some clones from it.. Hmm.. All-in-all.. I'm happy with how these girls are growing for now tho.. This rootzone issue isnt going away.. But I think I found a way to make it work out.. I've been watering a little differently.. Here is a bit of an example: Day 1: Feed at 6.5 Day 3: Water at 6.4 Day 5: Feed at 6.3 Day 7: Water at 6.2 Day 9: Feed at 6.5 Day 11: Water at 6.4 Day 13: Feed at 6.3 Day 15: Water at 6.2 Etc... The runoff is staying above 5.5 each time.. But as I lower the pH, the runoff pH lowers as well (obviously).. So I think watering this way has helped keep these gorgeous ladies happy.. And theyare also very hungry.. I may have to start watering one plant every other day.. Water plant 1 tomo.. Water plant 2 the next day.. Then plant 1 the next day and then plant 2 the next day etc... 1 reason I want to start doing it that way is because I think the ETHOS Cookies isn't needing as much nutes as the Mandarin Cookies.. But they are looking great. Very happy and so are they! The heat has been insane lately.. So at the hottest part of the day I try to just turn the light down to 25% for 4 hours or so.. I hate having to do that.. But it's all I can do for now.. Or maybe change the light/dark hours.. Blah.. Whatever, they are happy! End of week.. I supercropped 2 branches.. They pretty much healed up and are already back to normal.. Like it didnt bring them down any lower at all lol.. It straightened back up and its as if nothing happened.. Just a big ass (MOOSE) knuckle lol.. But I stopped using the Kushie Kush and was just using the normal Gen Hydro FloraBloom in the mix. Will be upping the FloraGro next week! Wow.. Such hungry ladies! It's been so long since I've grown a bigger photo period.. I forgot how much they can take!.. On to the next!...
Likes
20
Share
@DrGanj
Follow
Bit disappointed with the phenotype.
Likes
2
Share
@Manchu
Follow
Mi experiencia con esta variedad, fue realmente buena. una semilla con mucho vigor, muy resistente a plagas, y con sabores y olores exquisitos
Likes
30
Share
@Stork
Follow
Day 15 PH 6.0 EC 0.8 PPM 410 DLI 20h 10.2 PPFD 142 Water 23c Day 16 Tue Add water and Nuts PH 5.9 EC 1.5 PPM 770 DLI 20h 10.5 PPFD 147 Water 23c Day 17 Wed PH 6.7/5.8 EC 1.6 PPM 810/800 DLI 20h 18.5 PPFD 252 Water 22 Day 18 Thu Add water and Ph down PH 6.0/5.8 EC 1.7/1.6 PPM 840/820 DLI 20h 18.5 PPFD 252 Water 22 Day 19 PH 5.9 EC 1.7 PPM 840 DLI 20h 18.5 PPFD 252 Water 20c Day 20 PH 5.7 EC 1.7 PPM 840 DLI 20h 18.5 PPFD 252 Water 20c Day 21 Sun PH 5.7 EC 1.7 PPM 840 DLI 20h 18.5 PPFD 252 Water 21c
Likes
8
Share
@Cowboy
Follow
I over water this past week but got back on track ,it took about 2 day for her to come back around,, but a great week
Processing
Likes
21
Share
@Stick
Follow
In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎
Likes
24
Share
@BunnyBud
Follow
31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water). ==Update 4 Sept== By mistake, I adjusted the pH twice, once to 7 and once to 8, and obviously the plant immediately showed symptoms of incorrect pH. At the next watering, I'll give Biobizz Grow with a little Biobizz Bloom since the plant has entered pre-flowering. I'll adjust everything to a pH of 6-7 and a ppm of 450-500.