Likes
Comments
Share
@hialex62
Follow
Day 29 Watered 400ml HulkBerry and removed some of the small lower branches with flowers. Day 31 Watered 500ml HulkBerry and 200ml WeddingCake and removed two big leaves wich were covering lower flowers. Day 34 watered 700ml WeddingCake and 400 HulkBerry Day 35 watered each 300ml
Processing
Likes
7
Share
@Smiffy
Follow
Not much to be done, watering this week at 6.0 just to ensure there is no nutrient lockout, feeling a little as though these two have been slow in the past week. Buds progressing but feel like it should be quicker at this point. Fourth week of flower
Likes
12
Share
Likes
10
Share
After 4 days of heavy rain, the first mold appeared... So I spent about 18 hours searching for plants and picking out mold with tweezers After last year's experience with another seed bank, I expected the plants to be very affected by mold, but I have to say that Fast Buds genetics coped very well! Mold appear mainly on blisters to which the stem of the leaf leads water, which then collects between the stem and the blister I trimmed the plants more so that the air flows better and that water does not stick to them The plants look healthy and the flowers are gaining strength I really like the genetic stability of Gorilla Zkitllez, almost all the plants look exactly the same and are in the same flowering phase. Some plants are absolutely gigantic! if I didn't do LST, I guess the plants would be as big as me. however, what surprises me is that they are slower than Gorilla Strawberry, I think that some Gorilla Zkytllez will be after 12-13 weeks From the start Gorilla Zkytllez smelled strongly like diesel but now a very strong pleasant sweet smell exactly like Zkytllez candies I haven't seen my children for 3 days, it's raining extremely ... the last time I was chased out by swarms of ants in the early evening, I've never experienced this before, there were maybe a million of them and they sat on me and on the plants I'm finally going to visit them tomorrow, I expect I'll have a lot of work to do with mold and I hope the swarms of ants haven't harmed them in any way
Likes
6
Share
Getting close a little mire swelling to do chopped the snow ryder about another week till she dry already been five days smells so delicious like mango n citrus
Likes
9
Share
Update day 10 of transition to bloom this Goofiez 2 it’s soy strong !!
Likes
17
Share
@BLAZED
Follow
Week 12 (17-4 to 23-4) 17-4 Temperature: 23.1 degrees (lights on) 19,1 degrees (lights off) Humidity: 62% (highest) 50% (lowest) 18-4 Temperature: 22.5 degrees (lights on) 17.9 degrees (lights off) Humidity: 61% (highest) 52% (lowest) Opened the reservoir for a couple of minutes. 19-4 Temperature: 22.5 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 54% (lowest) No pictures. 20-4 Temperature: 24.1 degrees (lights on) 19.1 degrees (lights off) Humidity: 65% (highest) 54% (lowest) Light increased from 50% to 60% strength. I also made a new 10L feed, and added it to the reservoir, there was still 2850 ml in the reservoir, so i can calculate how much they get per watering. Opened the reservoir for a couple of minutes. 21-4 Temperature: 24.4 degrees (lights on) 19.3 degrees (lights off) Humidity: 66% (highest) 54% (lowest) No pictures. 22-4 Temperature: 23.7 degrees (lights on) 19.7 degrees (lights off) Humidity: 67% (highest) 42% (lowest) Opened the reservoir for a couple of minutes. 23-4 Temperature: 23.6 degrees (lights on) 17.7 degrees (lights off) Humidity: 64% (highest) 50% (lowest)
Likes
10
Share
@Kinghaze
Follow
In week 3 of flowering, the ladies suffered from nutrient deficiency. Due to vacations, they had SPA water only for a week. I immediately added nutrients to the water tank, with an EC of 1.8 I will also add green sensation starting this week. I also defoliated them, all the affected leaves are almost all gone.
Likes
179
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 35 and she's just killing💀it👌 👉We are in the Preflower stretch 👈 Everything is looking good even the Tiny Cup 🥤 So Shit , I gave them just a tad to much nutes on the last feeding 👈 But I have since fixed it So I'm starting to pull her over and do some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
470
Share
BIG UPDATE THIS WEEK !!! ---------------------------------- FEEDING MISTAKE / TRANSPLANTING THE PLANT ------------------------------------------------------- Last week, the plant was showing some feeding issue (some burned tips). After discussing with another grower ( @Asnoriu ) and carefully listening his advices, I decided to transplant the queen to a bigger pot. 16L can be ok, but I had a long veg (10 weeks), and this was getting too small for the lady. So starting from now, I will always transplant before flowering, since I understood & learned how it help the plant to develop good roots network. The plant probably suffered from too much feeding with Fish-mix. Asnoriu told me He was using it at 50% of the recommend dose, and not at each watering. This totally make sense, especially when i look back at my first grow : I used no fish-mix during almost all the veg, and she grow verry well. My gardening soil was probably rich enough for my plants! I transplanted the plant to a bigger pot (16L -> 30L) and filled the new pot with Biobizz All-Mix soil. I took the plant from the old fabric pot like if it was a sock : what a niiiice and easy technic ! (Thanks again Asnoriu). Watered with pure water (ph at 6.2-6.5), without any nutrients (All-mix is already rich enough). I will feed again in 1-2 weeks. BIG ERROR WHEN APPLYING LST BACK IN THE NEW POT --------------------------------------------------------------- I had to remove my strings (LST) to switch to the new Pot. When I was applying the LST again in the new pot, I went too far with tension... And the main-lining broke 😟 So I fixed it verrry quickly by releasing LST tension, and using a string to tight the stem where it broke. In less than 5 minutes it was fixed. I was verry worried that it may have killed my queen.... But she didn't shown any sign of stunt, and 48h hours later, I can say that she look verry good. This doesn't slowed her. She seems to grow faster since transplant, so all good :) So, note to myself : never try to LST when flowering started, or only verry carefully, with just littles adjustements. SPONSORSHIP ANNOUNCEMENT & LIGHT + TENT UPGRADE -------------------------------------------------------------------- I'm verry proud to announce that Mars Hydro ( @MarsHydroLED ) decided to sponsor me :) So I received a TSW2000 (basically 2X the output of a TS1000), and a Mars Hydro tent (100cm x 100cm x 180cm) That's PER-FECT, since I was already using a TS1000, which I bought because it was the best deal (price/quality) for me. I'm verrrrry happy about it, and I feel verry lucky to be selected by Mars Hydro 🙌 This mean a lot to me. I still have a lot to learn, but I'm doing my best to improve myself and learn. Learning from the other, and sharing my experience, and being rewarded for that... Damn, so cool 😍 MENTION ----------- Once again, thanks a lot @Asnoriu You are MY grower of the month, for sharing your ideas, opinions, and advices with me :) WEEK DETAILS ---------------- - Day 79 : Watering 1L (ph 6.2 - 6.5) with feeding (as detailed in the week details) - Day 82 : Transplanting from 16L pot to 30L pot. Broke stem, and repared it. Upgraded from Mars Hydro TS1000 to TSW2000 (2x more powerfull). Watered with pure water. - Day 84 : Plant look verry great, and seems to stretch & flower faster :)
Likes
18
Share
Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney
Likes
22
Share
@Gembel94
Follow
Freue mich auf die nächsten Wochen!
Likes
5
Share
@Naujas
Follow
it rained a lot this week, and there was not much sun, it should stop raining in the coming days:) she is growing:) and she still has a lot of time :).
Likes
35
Share
@BigDaddyK
Follow
getting tall and frosty Merry Xmas all. Slightest touch and you stinky
Likes
5
Share
Week 10 total life Week 5 flowering The stretching stopped and the energy is spent on bud formation. Fertilizer. Plagron Boom 5 ml, power bud 1 ml and green sensation 1 ml Stopped the vita race this week. Happy with the way it's building up it's bud density. leafs and flowers are turning purple and the resin production is great......4 weeks to go...can't wait 😶‍🌫️
Likes
3
Share
This grow is stretching out a Lot longer than I anticipated,,, but goes to show that good things take good time ,,and this girl doesn’t want to leave any stones unturned,,packing it on top to bottom,,,😉😁🙏💚💚💚🇦🇺
Likes
28
Share
Hi guys, welcome back to Mrs Peaky's Gardens . well....we're almost there...we'll start by washing🌊 the roots of these beautiful girls with thick hair! 😁😉❄️
Likes
80
Share
@Qlimax
Follow
Hello and we are at the end finnaly!! I harvest them on day 64!!! Harvest was amazing some flowers diffrent then others but cus of my noob box and all i am rly imprest and heppy abaut whole journey,this site helped me alooot!!!TYWM!! Buds are rly nice and they smell even better!! 😂 I was thinking of buying LED but.......i will grow indoor onley at winter and MH/HPS give alot of heat so is kinda rly nice....and i rly love how they grow this time so.....🤘 🤝For next grow i decided i will ..🤝 👉.more&sooner& etter LST then this time! 👉more def on ending. 👉Gonna buy CaMg fot sure! and mybe smth for roots/flowerig (didnt decide yet) 👉Better/stronger fans for better air flow 👉Alredy ordered magnify tool....60x 🔬zoom for 5€ from wish(with shiping)i had 32x zoom now but it wasn't enought. Still cant see tricomes clearly with 32x 👉Better reflector 👉Brought glasses so i dont destroy my eyes cus this briht light!😎 👉Ordered TDS metter In few weeks i report final results:)...... and alredy 5 neew flowers are growing 3x blackberry 2x zkittlers from 42 😎😎🤗 Eejoy life!
Likes
1
Share