Likes
Comments
Share
This week they stopped the stretch and started focusing on the buds, all lower part is removed
Likes
9
Share
@ottplants
Follow
Nur noch Wasser und Geduld. Das Spülen spare ich mir, indem ich ihr ausschließlich Regenwasser gebe. So kann sie bei Bedarf restliche Nährstoffe noch entspannt aus der Erde ziehen und auf ein relativ natürliches Ende zuschreiten 😁
Likes
14
Share
D15/V11 - 15/04/23 - Added water and nutes EC 0,7 pH 6.4 D16/V12 - 16/04/23 - Nothing D17/V13 - 17/04/23 - Nothing D18/V14 - 18/04/23 - Added water and nutes D19/V15 - 19/04/23 - Nothing D20/V16 - 20/04/23 - Added water and pH+ D21/V17 - 21/04/23 - Nothing
Likes
14
Share
Pictures are taken 20 mins after watering left the soil to dry out. The plant on left that is further ahead doing good noticed cal mag issues on plant on right not to worried as reaching harvest time soon anyway but still added some with watering just to be safe . Other than that pretty happy
Likes
8
Share
@Tonysmile
Follow
I'll have to come back with a smoke report
Likes
49
Share
@Roberts
Follow
FBT2401 is starting her bulking stage. She is due for a solution change. It looks like the mixture is getting too strong for her. I will be doing that very soon. Likely tomorrow when I have more time. Beside that everything is looking pretty good now. Thank you Fast Buds, Medic Grow, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Processing
Likes
2
Share
@BigHorn
Follow
Week has gone very well will be trimming all fan leaves come week end. The buds are already starting to come in and the smell is becoming more pungent
Likes
46
Share
Servus Folks! Not much to report. No signs of flowering yet, constantly growing at a good pace. See u next week.
Likes
8
Share
Drying Conditions will be as 18°C and 50% RH. I think the lockout was my fault as i was overwatering at some point mid flower. Still good producer but not as loud as the first grow under 18hrs of light. All in All still a recomendable plant to grow but nothing too crazy.
Likes
6
Share
small problem with the ozone management now solved I lost a things Pink Rosa finished hydroponics now again with Dossidos auto... I show in the photos the damage from ozone and and I'm noticing a very developed root system in zkitt .. dream .. and dankness
Likes
81
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 👊😺Woo-Hoo!! About half way there!! everything is going fantastic in this tent! (wish i could say the same for all of them😿)..The SP-3000 is crushing it again! Their nodes are spaced perfectly for fat buds, they start stacking super low, we would normally get light colored growth down there with our old LEDs, this is definitely penetrating deeper..We're still feeding with every watering but one standout will be getting just water this week (too dark)..we removed a few more large fans from the tops but nothing drastic...temps are much better since firing up a 2nd 390CFM for the far tent.. all 3 tents pump thru 6" host to a single 8" hose out a window, the ambient temps of the room are much warmer than the inside of the tents with that much air moving.. thanks @Asnoriu for confirming we wont be hurting much running full time with some negative pressure this summer..We're counting on these "Fast" strains to go about 8 weeks but time will tell.. not too much else to report, its been a breeze this week...thanks as always for dropping by and happy harvests friends!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
8
Share
Likes
17
Share
@MrJones
Follow
MrJones Ztrawberriez Auto 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 💧 Feeding - Using Gaia Green Grow / Bloom and Compost Teas 🍃Training / LST-Defoliation-Topping TBA 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between products each month for Integrated Pest 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 🗓️Sunday 12.31.23 Harvested plants today, the WPM came back, I did my best to get rid of it, but I believe my outcome was affected and will grow this one again. 🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️Bud Description Ztrawberriez Auto produces long and fat buds with a beautiful light green shade with oftentimes purplish hues and a thick layer of resin that starts at the top of the flowers and continues to the tip of the sugar leaves. It’s the typical bud structure you would expect from hybrid varieties topped with an explosion of fruity terps that’ll hit you in the face with a blend of creamy, fruity, and sweet aromas as soon as you break the buds open. A must for terp heads and extractors looking for exaggerated flavors and aromas 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️SOIL MIX 40% ProMix HP 40% Coco Coir 70/30 15% Worm Castings 05% Malibu Compost 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
Processing
Likes
24
Share
@Grnhead
Follow
At cruising altitude now. Moved the nutrients to full bloom mix and just keeping the PH even. Defoliated only a bit to keep as many buds exposed to direct light as I can. Around mid-week everyone’s crystals showed up to finally catch up to Pinex1. Pinex 1 is much further in bud development and I can tell she is going to be a fat one. Pinex 2 is a vigorous grower. I happened to take 2 clones from her and both are rooted and happy. She had the fattest stems and I can never seem to give her enough nutrients. Her leaves are a lighter green and clearly want the light. I’m interested to see if I want to make another grow from the clones or not. Pineapple Skunk is a very attractive plant. The leaves are dark green and the buds are bright white. Now that the crystals are coming in there is even more white and they just look awesome. The buds are starting to fill in more. I hope they get really fat by the end of flower but hard to imagine anything catching up to Pinex1.