On flower day 60, it was finally time. Three days before the final cut, I did a last light watering with plain water. The last 36 hours, the lights stayed on. In the end, I had around 20–30% amber trichomes. I'm super happy with the result. Trim jail was exhausting but totally worth it. The harvest is now right in the middle of curing. As for the smell: a sharp, earthy, leathery diesel mix with hints of lemon. The fuel note is, to my delight, much stronger than expected. Incredibly sticky buds. Sparkling flowers. Thanks so much for following along with the grow journal! Maybe it'll help someone with planning or give a general preview for a future grow of this strain. Much love and happy growing!

Probably gonna harvest Friday or next Wednesday! I’m happy with the test buds I’ve tried. They have very good flavor, smell and the high is very happy and easy going for the devil cream the cream mandarine I have not tried yet and they probably have another week or two.

Beginning of the second week of flowering. One has not yet shown its sex, it appears to be indica, but it is full of pre-flowers. The largest is 47 cm, the smallest around 30. 09/10 - Now it's 58 cm, this sativa doesn't stop growing. The indica has not shown sex yet despite having pre-flowers everywhere. It doesn't seem stuck to me, as it continues branching, but the height hasn't changed almost anything. 10/10 She reached 65 cm. The others are 50 cm. The last plant that was missing to show the sex, came very late, it had all branched before showing the sex, unlike the others, and unfortunately it was a male, already dead. She just looked indica, but was a long sativa male. Of the 5, 3 females (2 in organic soil, 1 being fertilized and the other in inert soil) 2 males dead 11/10 - It is 72 cm. It is colossal, I had to tie it up at the top, as I didn't have enough space to lift the bulb and it was starting to burn some of the tips of the leaves. It's better to have mild, temporary stress than heat and burning stress, which is worse in the long term. The others grow well, gaining weight, without problems with height.

In den letzten Tagen zeigten die Jealousy-Pflanzen deutliche Aufhellungen und rostige Flecken an älteren Blättern. Zunächst wurde von einem pH-Problem bzw. Phosphormangel ausgegangen, da die Symptome untypisch und punktuell stärker wurden. Nach genauer Analyse von Düngeschema, EC, pH und dem zeitlichen Verlauf stellte sich jedoch heraus, dass es sich um einen ausgeprägten Calcium/Magnesium-Mangel handelte, verstärkt durch eine Unterversorgung in der Blüte. Ursache war, dass ich mich ab Blütewoche 5 vertan habe und über rund zwei Wochen nur ca. 1 ml Bloom (plus Zusätze) gegeben habe, obwohl 3 ml laut Schema nötig gewesen wären. Dadurch entstand ein schleichender Mangel, der erst verzögert sichtbar wurde und fälschlich wie ein pH- oder Phosphorproblem wirkte. Der pH-Wert lag im Nachhinein betrachtet korrekt im Bereich um 6,2–6,3, der EC war ebenfalls nicht kritisch – die Pflanzen hatten schlicht zu wenig verfügbare Nährstoffe, insbesondere Ca/Mg. Nach gezielter CalMag-Gabe (ca. 0,3–0,6 ml je nach Pflanze) zeigte sich innerhalb von 24–48 Stunden eine klare Reaktion: neues Wachstum wurde wieder grüner, das Fortschreiten der Symptome stoppte. Bereits geschädigte Blätter rosten weiter, was als normal einzustufen ist, da diese Schäden irreversibel sind. Aktuell befinden sich die Pflanzen im Endstadium der Blüte. Die Trichome sind überwiegend milchig, kaum amber, was auf eine verbleibende Reifezeit von etwa 5–7 Tagen hindeutet. Keine weiteren Korrekturen geplant, Fokus liegt nun auf Stabilität bis zur Ernte.

Booommm! Llegó la hora tan esperada Farmers nuestras flores llenas de resina acabandose de formar, la verdad que estas genéticas ayudan mucho al desarollo del cultivo espero que os guste!! Salut y força al canut!!!

Week 2 seedling

💩Holy Crap We Are Back At It And Loving It💩 Growing in a 11 ounce pot 👈 👀 👀 👈 Growmies we are at DAY 49 and she's just killing💀it👌 TALK ABOUT FROSTY 👈 Amazing results thus far for the Tiny Pot 😀 👉Added straws within the Tiny pot to help watering in week 4 👈 So I'm starting to see she needs watering every single day and now need nutrients 🙃 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 WATERING SINGLE TO TWICE DAILY 😋 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Had to switch the ladies to different lights for reasons undisclosed. They handled it very well and are growing vigorously. Lst was easy on them due to the topping a couple weeks ago. First signs of flower are showing as well.

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

So… the progress is great because of this beautiful weather. Purple Queen, Hyperion and Critical 2 even got another 2 pair of Leaves. Gorilla Z sadly didn’t make it. She went completely white. Sherbet Queen and Critical 1 are fighting for life but you also can see the progress. I don’t feed them now but I Think I’ll start next week. Also next week if Purple Queen ist gonna make it to the 5th note I’m gonna top her, because she’s a photoperiodic. She has plenty of time to recover. All the other autos won’t be topped, they were already slowed down enough. See you

Lollipop Added 3rd net Removed male

Did a flush with sledgehammer. there are so many bud sites on this baby.

Dec 12: Growth has been good, leafs started yellowing as I tried a regular watering as opposed to a feed, and they did not take well to it. I’ve read that it’s good to incorporate waterings between feeds, but 24hr later noticed a bit of yellowing on the lower section, 48hr post watering even more yellowing. Dec 18: Going with feed only and yellowing has halted, stretching has officially begun. No adverse effects from the short term nitrogen deficiency (that’s what I narrowed it down to). Playing with budsites to maintain an even canopy, and as soon as I see stretching halt, and fattening begin, I will up the bloom nutes. Dec 20:

DAY49 7 Weeks Buds are hard. Smell is extreme. Very limited amount of spidermites under some leaves. No reason to exterminate them, because next week I'll probably harvest the plants. The smell of the Triple G is fanastic, Big separated buds. The Cookies Gelato are more sativa style of buds than I'm use of them. There leaves are turning purple. The Liberty Haze has a lot of small leaves in the buds, and thet got amasing blinking white flowers. Probably this will be the plants I'll harvest the last, because they need some extra flowering time. The Wedding Gelato is creamy, lots of trichomes and is fast flowering. But some flowers got budrot. I'ts hard to get the humidity low because of the rainy and misty autumn outside.

_____📅 Week 6 | 📅 Day 36 - 42 | 03.05 - 09.06 ______ 09.06.25 | Day 42 🌞💧 🔸Grape Guava: Looks like an accident, haha - Also grows very well but quite compact, it may need a little less light so that the spacing between the nodes is not so dense. In any case, one of her main shoots broke off, which is not too bad, so I topped the other side for the symentry. Looks like broccoli hehe. But it has a nice rich green color. I think next week it will start flowering. 🔸It was a bit colder this week, but that didn't bother me or the plants. 🔸This week I watered them 2 x with 2000 ml _________________________________________________________________________________________ current conditions: 🌡️🔆= 22-23° 🌡️🌜= 18-19° 💨 Hum. = 65% 🔦 PPFD = 500 umol 18/6 🔦⌚DLI = ~ 32 _________________________________________________________________________________________ Equipment to use: 💡 Light: 2 x Sanlight Evo 4- 120 on 50% ⛺ 120 x120 x 180 🍯 Pots: 18 liter pot 🌱 Soil: Bio-Bizz light mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap Water 0,5 EC

Fendi 2 has a mutated fan leaf that kinda looks like a lobster claw. Some older leaves that started yellowing at the tips last week (I think it was a nutrient burn from transplanting from rockwool cube into soil), have gotten more brown and curled upwards.

​Woche 2 lief ohne Probleme. Das 24-Stunden-Dauerfeuer hat sie gut angenommen. Dieses Mal wird sie nicht getoppt, sondern es wird nur der Haupttrieb defoliert, sodass die jungen Triebe immer genügend Licht bekommen. Ziel ist es, dessen Wachstum ein wenig zu bremsen, sodass die Nebentriebe aufholen können. Mal gucken, wie gut das klappt. Für die kommende Woche gibt es einen 20/4-Lichtzyklus und ein bisschen Culinex, denn es gab gratis Trauermücken dazu.