COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Que pasa familia, volvemos de #GMM20 , y la verdad que entre buenos humos fue un día agradable, ya actualizó esta cepa , crazy cookies de zambezaseeds ya están a punto para cortar, una a tirado al final plátanos y la verdad que no estoy tan contento aun viendo el tamaño. Ph controlado hasta el final, la temperatura al final algo alta pero sin problemas, Humedad correcta. Así que hasta aquí es todo , que paseis un buen finde fumetillas.

Let’s start with the smell absolutely wonderful it’s floral & sweet it reminds me a jasmine green tea🤤 The buds are SUPER sticky✂️ See you in one month for the smoke review Take care 😎 Oh & happy new year

Final 10 days for this plant, got flushed yesterday now shes on ripen untill harvest

Bubble og I still have 4 of these guys going. A few of them are still dark green and pretty decent growers they have thiner leaves. I'm sure a few of these will be on the chopping block later down a few of them just have crappy start growth and they need the humidity at 75% or above 100% the time with the light lower than normal or they start to shrivel up. That's not all of them just a couple. Also I am only going to flower 8 plants out if the 12 seedling and I have 5 strains going so can't have half my plants bubble og (wish I had room to grow the full 12 plants at a time) It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.

Unfortunately my digital timer was defective and made the flowering phase delay by 2 weeks. From one side, this delay allowed them to stretch a bit more. On the other side, it made me start giving bloom nuts with bad timing, thinking the bloom phase was already started. In other words, I gave bloom nuts in the last 2 weeks of veg. This means I’ll have to give them “week 3” bloom nuts for two more weeks, maybe reducing by 50% the B-52 and Big Bud dosages (they could be a little too much). Let’s now talk about the lady: well, she’s growing like a monster: 73cm!!!! She is the biggest of the grow room. She’s been growing 7-8 cm every day in the last days. That’s impressive! Woohoo, I love sativassssss! They will make you feel like a king, and they will be your queens 👸 By the way, sativas are WILD, and they make you sweat before showing their pistils. That’s what’s happening now. As well as the two Euphoria, they’ve not shown anything but a small pre-flower (not even a pistil for the moment). We’ll see in the next days. In the meantime, enjoy the photos and the video at the end! Cheers buds 👊

Week 1 of my little bulb experiment. Plant is growing pretty well and the early structure seems sturdy. I don’t know what Im going to do for light once it out grows the Feit 9W. May just leave it in the window.

War überschaubar für diese Bedingungen im Keller Die letzte Big Berry habe ich tatsächlich erst letzte Woche geerntet, habe PK13/14 von Canna rein gekippt, da sind die Knospen nochmal explodiert 🤣

Through out the week she received a foliar spray of Epsom Salt to prevent any Mg issues the others had in the tent. She is the shortest and smallest of the bunch but her foliage is the most vibrant. Very healthy and strong stems forming.

New Plant New Adventure 💚🌱

CBD Star bud seem to be thickening up despite obvious signs of deficiencies, likely due to a pH induced nutrient lock out. Phosphorus, nitrogen, calcium, manganese, molybdenum? It’s basically the periodic table of deficiencies. Main cola started to turn purple due to molybdenum deficiency? Found a spider mite on Cheese… sprayed the leaves down with a 1:10 alcohol:water solution which seems to have taken care of the mites.

She is starting to pre flower, let's get it

@twenty20Mendocino R&DUpdate ~ Let’s Go day 49 for these girls an we are looking beautiful! This week we gave them another trim up a tied them down more a today they have bounced back like nothing happened, strong ones they gonna be an so nice an healthy! The Sangria is looking really beautiful, she’s Been flowering for lil over 2 weeks now so we still got a good amount of weeks for her to build a little more but she is already looking amazing, can’t wait for her to be done, smelling delicious! Hope you all enjoy an have an amazing productive day as well as a great safe weekend! Peace love positive vibes to all y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻

Chopped Wednesday the 11th. Trimmed and began curing the 21st. 4oz of super dense sticky bud. 1 pound of high grade trim and 2 oz of low grade trim. This plant was truly strange the places it chose to grow Trichomes. Stay tuned because I will be making hash with the high grade trim. Also will be uploading smoke score in two weeks Thank you to anyone who followed and god bless!

Week 8 Flower The last week of flush for these two. They were taken down on Day 56, after a 16 Day flush. I think Twin2 could have finished at 7 weeks, but of course I hadn't planned for this, or I would have flushed sooner. So she was taken to the originally planned 8 weeks. Twin2 has also foxtailed quite a bit, from only slightly higher temps and also because she's having a last attempt at catching any pollen in order to reproduce. Although the pots were slightly damp still when I harvested, it is best to take them down when they're dry. The only reason I didn't, was because I knew I'd be too busy the next day, and there were plants in veg that were desperate to be thrown into the flower tent! The pics do make them look wetter than they were though. Their fan leaves were taken off and they were each hung in seperate boxes, where they'll dry as slowly as possible for between 6-10 days. I dont suffer with very high humidity, so I'm able to do this without any issues. When I feel it is too humid, I simply burp the box for the first day or 2 once a day. The slower the dry the better the buds will taste/smell. Once she's dry enough she'll be trimmed and jarred for curing. It's going to be a pretty tough one for keeper pheno! They both have similar but very different smells. By that I mean, they both smell very floral and sweet, but T2 smells extra sweet (although definitely not as dense). That doesn't mean T1 doesn't smell just as nice. Hers buds are thicker and more dense, so even though I've favourited T2 in the pics, I think I'm leaning towards T1 still. But in all honesty it's still down to dry weight and the taste test! This can all be looked forward to in the harvest update! It's been a seriously fun diary with these two twins. I'm definitely glad I separated them. Do you think you'll attempt to separate them after seeing my experience? Please let me know! Thanks for following and happy growing! 🐺

Tangerine Band is growing good. She should be showing pistils soon. Everything is looking good. I will change the solution to blooming next update. Thank you Spider Farmer, Athena, and Exotic Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Can't believe we're at the start week 5 already. This is such a beautiful process. Things are looking good - I started defoliation on all the ants this week. I figure, the little one isn't getting much bigger, the big one is so bushy the light is having trouble getting thru even with LST, and the bag seed seems to be a photoperiod plant so I have all the veg time I need to recover on that one. Update: The bigger girl started flowering on day 32! Let me know what y'all think!

Week#6 FLO.

Vamos familia que ya actualizamos la cosecha de estas Frosted Guava de Zamnesia. Vaya flores que se han marcado repletas de tricomas, parecen escarcha y las flores se marcan aromas muy tropicales, la verdad que únicos. Es una variedad bastante fácil de cultivar pero al tener un periodo de floración algo más largo, hay que estar pendiente de alimentarlas bien, gracias Agrobeta en mi sala es posible. Temperaturas máximas en 24 y mínimas en 20 y una humedad estable en torno al 36%. Las mantuve 10 semanas pero facilmente si se quedan 11 tampoco estaría mal, yo las vi bien maduras y ya tenía tricomas ambar así que les di matarile. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que disfruteis este diario, buenos humos 💨💨💨