Hey all, She is doing pretty well. Trichomes are stacking up. She is smelling fruity and a bit of sourness to it. I am going to flush her once this week. Did some defoliation. Nothing much!

Läuft gut …

Some night time pics,enjoying their rest mode.Suns been great the past few days.Growing bigger by the day

Even the longest journey begins with the first step, and this grow was another step on the way to perfection as the journey itself is the destination. Learned a lot and can't wait to apply my knowledge to the next strain.

2/14: Decreased distance between the lights and canopy. Let the maximum swell commence! 2/16: Fed today..increased sugars/carbs. This was probably the last feeding with Beastie Bloomz..switching to Cha Ching at next feed and cutting back on the One.

Cut net down this week and had a reshuffle around, dos si dos was a lot taller so move lights up and put other 3 plants on top on boxes to level top as much as i can Had to do a little late trimming to help airflow down low and just give a little more breathing space as suffered with a little rot on my first grow luckily not too bad though but fingers crossed none at all this time, i managed to avoid it on my secone grow so hopefully will be ok Plant looks strong and healthy, had no issues so far plenty of tops cant wait to see it fatten up

18.6.2k24 ✅💚 23.6. - Low stress for a stronger peak

Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.

Es ist offiziell, die Ladys werden mein Zelt sprengen 😂💀 Hätte nicht mit so einem explosiven Sprung schon in der ersten Woche gerechnet 😭 Hab ein zweites Netz eingesetzt um die Stämme später in der Blüte stabilisieren zu können, vor zwei Tagen 😳 werde mir ein drittes besorgen und wenn die zu weit oben sind muss ich die wohl einfädeln ins Netz. Hab mir ansonsten noch eine Migro Aray Intra 160W für das under Cannopy besorgt, bin gespannt was draus wird 🤩 Die trinken aber auch wie verrückt, habe vor zwei Tagen den 47 L Tank voll gemacht & jetzt seieht der Tank so aus😭 [ Bild ] Es ist einfach nur verrückt

Day 39-02/09/22 back on track here we go started to give bloom and top max aswell this week!! The one that topped itself is looking good!! One of them does look abit stressed but still to early to tell really!!!

Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️

Germination started on 4/2 and they finally sprouted out the dirt on 4/12. I'll update this every Tuesday. Obviously going to be a long one but hopefully yall follow every step! I'm really fucking excited to grow these! And at the end I will make hot sauce with them, put it in a big ol bottle and the first 50 dollars takes it 😎 Happy Growing Everyone ✌️❤️😁🍀🎶👽 EB

Transplant week! Some of the girls in the tent started to droop but this one didn’t! She’s looking pretty good to me Come hang out with us in the discord!

Graduated, and am off from work for a few weeks, so went overboard on photos. Plant is doing well, leaves are starting to turn yellow (strain trait). Can't wait for the harvest and being able legally gift my xmas ornaments to my cousins during our "cousins walk" at our family xmas party.

-looking healthy

The plants are looking really healthy, I've been defoliating here and there to get the light to penetrate to the lower leaves and branches. They have started to bush out from topping them last week. I started using Mammoth P Microbes halfway through last week. They seem to have grown a little quicker since adding them. The plants are still being fed 4 times a day at 1 minute each feeding. No signs yet of which is female and male, I am planning on pulling all the males once they show signs.

Been back to cruise control now after having a few questionable spots pop up on random leaves which I’m pretty confident was PH swing and temp shock when changing the res out. Once everything is back to being stable, new growth looked fine. The EC/PPM is dropping slowly along with water consumption daily, looks to be in a good spot for now. I have been defoliating leaves blocking tops in the middle, and I’ve been pinching out the tops on the plants as well. I cut my lights back just a touch in hopes I could get a little more vertical growth, these things are stocky!! Maybe that’s the Mammoth Si at work.. See you next week!

Dramatic weather here, 2 violent storms have hitted my tent without mayor damages. I've bought a high density polyethylene film from farmer supplier, God blessed for this choice. Strong. But I've made a great mistake on Thursday because I was very busy cropping and curing Royal Gorilla that I've forget to water the sisters. I've watered them on Friday just before I started putting up the tent and the storm started with 90% humidity. It has become a tropical greenhouse, so to avoid mold disasters I drilled some side holes and raised the lower edge. Fortunately, on Saturday my little ones managed to dry themselves well thanks to a little sun and a dry wind. I've learned the lesson. Now that weather is a little bit better but colder I've realised that my plants now love to live under a greenhouse, flowering is accelerating. Saturday check after the storm, bud by bud, revealed to me a single rot spot on minor side branch completely obscured by upper buds and fully soaked by water. I've removed the affected part carefully, no metastases around. Some branches start to bend down by weight, buds are enormous. Now under the greenhouse plant is restarting to flower well, as notorious Special Kush don't like too much sudden changes of temperature. Do not want to repeat mistakes done with Royal Gorilla so the plant will be cropped only when 100% ready, not a minute before, not a minute, I think on Wednesday or Thursday if dry. We are talking about of more than a pound of shit! P. S. need some help from you guys to trim Royal Gorilla, need to smoke less, that shit has no respect! 😁😎