Just at the end of week # 2 in bloom , LST training is going well and the canopy is pretty full , cooler outside temps allow me to use my co2 burner and they are all looking great with lots of bud sites and liking the nutrient balance, made new nuits today and it went from 1400 to 1150 in two feedings , one more week of stretch and then I will finish the under canopy cleanup and plan on a light defoliation at week 4 of bloom. The 8 Ball Kush is really showing great growth and it’s early on , should be some huge buds this crop , the Blue OG Kush is healthy , it’s my first time with it so I’m not sure what it grows like . Stay Tuned

Plants are very healthy They didn’t drink as much as I expected this week Trying to build doors for this closet

Nothing to really say except that they are growing very well Thank you for reading I will continue to update have a happy grow

Last time I did defoliation Now I hoop to get a big harvest of 200gr dry weight will be nice

Good morning, today is day 22 flower ! Nothing much to be reported as everything is on cruise control and there’s basically nothing for me to do anymore but water ! The permafrost buds are getting frosty, stacking amazingly and chucking up while the jungle cookies smell very strong but aren’t stacking as tightly! I’m super happy with how they look! Just continuing to water a gallon every couple days rotating fish shit and silica as usual! Nothing else to report and I’ll see you all next week

For the past two weeks I've been taking it outside for an hour or two sometimes three or four on a sunny days. Yesterday I took it outside and right after I made the video the wind picked up something crazy and knocked my plant over and subsequently two branches were hanging on by some bark. :/ Two broken branches (of 8 total)and lesson learned. i mended them with some wire and string but I'm not sure if they will die off, we will find out either way I'll be happy with what I get since it's so 🔥 👍😁✌️

First time growing Blueberry Auto, found it to fast growing with little margin for error.

GORILLA COOKIES 🍪 FF/ FASTBUDS WEEK #16 OVERALL WEEK #8 FLOWER This week she's just about done she's got about 1 week left before harvest buds are looking good and got a nice aroma to them. She's just on water now to flush. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you FASTBUDS!! GORILLA COOKIES 🍪 FF / FASTBUDS

So now week 6 started 3 of them are in Flower Girls Scout Cookies still stressed from the Thrips All of them hadn't any nutes till now Because I added Floganic to the Biobizz Allmix Soil. Just tap water with a pH of 6,8. I think I gonna add nutes the next 10 days I will start with 30% Bio bizz grow and bloom and 100% Topmax. That's my second grow and my first one with topping and Fimming just want to learn all of the growingcircle. So that's all for this day 😁👍 Edit : Day 40 Criticals and GSC Day 37 Banana Blaze All of them looking very good My favorite is the crit 2 very good growing. 😍👌

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/27/21 😻 3rd week and 2 of the Gelato are already showing signs of preflower and there's 1-2 "taco leaves" on a couple but this should clear since dropping room temps (we added 2ml/gal of calmag with last watering just to be safe) ..we're hoping for a lot more stretch before full flower.. no defoliation for these girls but we've been tucking leaves daily...the SP-3000 is an absolute beast in that tent, I can't say enough positive things about this light, we're already excitedly talking about our first photo run under the MarsHydro (only 3 months premature lmao!), we're tempted to get a 2nd and eventually run x2, SP-3000's in our 4x4 (a girl can dream lol)..thanks for reading if you made it this far and happy harvests grow fam!!! ❤️🤘😸 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/30/21 😿🔫 I did it again... our timer was switched from "timer" to "outlet" (probably got bumped) this means the plants have been receiving 24/0..i did this about 9 months ago in our basement tent (twice in 1 year, how embarrassing 😿)...these plants being autos I don't suspect that the extra light would matter however our exhaust system is programmed to shut down 30min after the lights..the plants were probably getting too warm for a few hours every night..this solves our "taco leaf" mystery...I'm so happy we caught this when we did ..a few plants were looking deficient so they all got a small shot of grow (2ml/gal) and guano (5ml/g) solution today, we also added a humidifier..its going to be R&R for these girls and I'll be checking all my timers weekly from now on.. ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Attention to detail

Noticed a bit of curling in the leaves and some spots thinking its windburn. We have repositioned the oscillating fan and waiting to see if that will help. There also seems to be a bit of discoloration on the Skywalker Haze, not sure what’s happening there.

*Week 4 Flower 09/24* Both Mimosa girls appear to be running fine with Mimosa (1) running a little behind but is catching up accordingly. Small oversight in early growth resulted in a minor stunt but she is improving dramatically. Water Feed has increased by half a gallon ( 1gallon clean - .5 gallon nute feed) *Week 4 Flower 09/28 - Mid week update* Both plants are flowering accordingly - Mimosa (1) is a bit taller then Mimosa (2) Buds are becoming dense and covered in trichomes. No deficiencies - No areas of concern - Potassium and Phosphate feeds continue *Week 5 Flower end of week recap - 09/30* Both Mimosa's are flowering nicely - Budsites covered in frosty trichomes. Mimosa (2) looks shorter but that is because her COLA was tied down to expose bottom budsites.

Day 29 Veg transplant day

Last few days - Day 65 - Fat Monkey Auto from @anesiaseeds Nutrients: @atami_deutschland / @atami.international / @stefan_atami / @daniel_atami Soil: @promixgrowers_eur / @promixgrowers_global / @promixgrowers_unfiltered / @promixmitch LED: @powerlux_spain Tent: @secretjardin_ Thank you to everyone who follows and supports my work 🙏🏻💚 This means a lot to me and you should know you are a part of it and only with you all this is possible, you are the best community 😎 Growers love, love for everyone

Hello everybody! This week will be the hardest one. I’ll have to work a lot inside the room, and even on GD to document all the changes. Last week I topped for the last time (in reality this happened the first day of this week), and finally stopped with high stress training. From now on, our attention will fall totally on ScrOG. Day 43: Topped the 4 colas at the extremities. Red blood came out from them (see the photos). Amazing! Sorry for the bad quality, but I got just the phone with me when I did the job. When I took the second photo (a few hours later), the plant had already sucked up all the lymph. You can still see the red blood by the way. Day 44: Set the timer to start with 12/12 from midnight of day 45. Day 45: SO MANY THINGS HAPPENED TODAY. Flowering started, baby! 🤩 Today, in the evening, I worked for about 4 hours to prepare the ScrOG environment. - Improved the LST before placing the grid. - Took some photos. - Removed the humidifier. - Since my LED panel has half of the blue lights broken (this happened three weeks ago), resulting in 100W less of total potency, I added 3 new lights pointing where the panel is broken (2x 36W led bulbs and 1x 30W COB led light). I uploaded a photo and a video to better understand what I’m talking about. I even tried changing the broken LED driver, but it didn’t work, so now I’ll have to wait until the end of this cycle to send it to maintenance. - Put 20gr of BatMagno (which is bat guano), 10gr of “Farina di Neem” (Neem Flour), and 50gr of Alghe, all of them over the soil. I’ll write something about these fertilizers at the end of the comment. - 4.5L of tap water (corrected to PH6.5), which gave zero runoff. Haha, she’s drinking like a camel. - Placed the grid. - Took a few photos. - Little defoliation. - Took all the other photos. - There we go! I preferred not to add the bloom fertilizer now because I’m a little worried about overfertilizing this baby. During veg, she showed me she doesn’t like nutrients, so I’m just listening to her requests. I’ll add the bloom one as soon as she seems hungry again. By the way she’s just 20cm tall (I’m so proud of this result) and the grid is located a few centimeters above her. Let’s see if I switched to 12/12 at the right time: I heard this strain usually stretches for about 6 weeks!!! 😱😱 Let’s talk about the ferts I placed on the surface of the soil. - BatGuano: it’s a mixture of organic fertilizers of natural origin and suitable to produce a high amount of organic nitrogen and phosphorus that can be assimilated at 100%. It’s a natural slow-release fertilizer for flowering: the raw materials used (guano, dried borlanda with ammonium salts, kieserite of natural origin, flagpole, meat meal, bone meal and dried poultry) are the result of a careful selection which ensures a low salinity and a gradual transfer of the elements. The phosphorus content in BatMagno (being organic) does not undergo insolubilization. - Alghe: they are a portentose substrate activator made of a mixture of algae of the species Ascophillum, Fucales and Laminariales, obtained through a process of dehydration and grinding without the use of any chemical substance. They can be used during the preparation of the soil, and increase and strengthen the formation of the root system, mobilize the nutrients in the soil, reinvigorate the plants, protecting them from adverse weather conditions, help plants to overcome stress conditions and improve the quantity and quality of production. All of this is possible thanks to the presence of betaine, cytokinins, vitamins, auxins and alginates polysaccharides. - Farina di Neem (Neem Flour): it’s a vegetable product based on Neem seeds, obtained from the extraction of Neem Oil through a process of cold-squizzing out, which increases crops, improving both growth and flowering, as well as strengthening the roots of the plants. The Neem Flour is mixed with nitrogen fertilizers, that slow down the conversion and leaching of nitrogen. Repeated interventions improve the endogenous resistance of plants to pathogens, creating an unsuitable environment for the development of insects and cryptogams. Due to the presence of important trace elements for plant life, it prevents imbalances and nutritional disorders. It also protects plants from Nematodes, ants, insects and soil larvae. Let’s say Alghe is the most smelly product. My room now smells like seaweed! I need to figure out how to give her water now that the grid is on. I think I’ll plug a 2m pipe at the end of my watering can. That’s the most easy and cheap way to fix this problem. I just need to find the right size of the pipe. I’ll show you my solution next week.

Being away over the new years I was unable to tend to the ladies. However, we received an update from friend