Just given water this week (nutrients won't let me display 0 😱) The leaves have lost their green right into the buds so it's time to chop them down. I'll try to do this later today or in the morning.

Week 11 All is under control: plants are growing correctly, healthy, deep green… perfect size, a few weeks before flowering cycle; I did a second topping week 10 on everyone (+6 nodes): I would have a maximum size around 150 cm for discretion and space. Still Aphids problem on the Royal Moby and I treated leaves by hand with Soap…making a mistake: too late in the morning so the sun burned some leaves. This insects are still there but the infestation is contained for the moment. I sprayed Neem oil on all plants. Added more soil in each pot : 1.5/2L of humus worm + guano bat. I observed a sort of burn on lhe extremity of leaves: possibly a sign of nitrogen excess. I stopped nutrients for a while, adding just enzyme and Alga Mic. Watering around 1.25L/2 days Daylight 15h30 - 6h25/21h55 Sunny days, cloudy sometimes, windy (NNE) T°= 13ºC N / 21°C D Humidity 67%

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

18 of 20 seeds germinated. There is 1 different strain in between the rest. All these plants have been vegitated in a small tent I use for vegging only. There are 4 plants that have some kind of mutating goin on, so I will keep a close eye on them.

En el video se ve bien con el zoom como está sacando tricomas! 🔥🔥

This ladies got pretty big for real, hands down the biggest autos I've ever had grown in 7l pots, excellent performance, and the flowers start to stink really strong, there is one pheno which is more developed than the other 2 phenos but the 3 have developed really good and they are producing a lot of sticky and stinky trichomes! Let's see how this will end up! Can't wait 🤤

Hey guys :-) They are developing very well :-) . Was watered twice this week with 1 l each (nutrients see table above) Maybe I'll train them this week. But I'll think about that spontaneously for reasons of space :-) . Otherwise everything is going according to plan and I wish you a lot of fun with the update and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

CBD Compassion Lime Auto 🏥🍋 Your passion, Our Passion, Dutch Passion... 😸 Growing in Mars Hydro tent (3x3) ⛺ with Mars Hydro FC 3000 🚀 She is unfortunately flowering on 12/12 light cycle with photoperiod plants, but despite that she is doing fantastic. Smells like sweet citrus. Moved out of tent for final few weeks. Week 11 ✅

Info : Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Harvest day 67. Hey guys :-) . Finally the time has come the lady has been harvested :-). In the last week the water was freshly mixed with Canna Flush and an Ec of 0.4 in order to completely use up the nutrients in the last few days 👍. You can see it on the beautiful autumn yellow leaves :-). Before harvesting, the lights were turned off completely for 48 hours. After everything was neatly trimmed by hand, the buds were put into the drying tent, where they are allowed to dry for the first 8-12 days at a humidity of 62% before they ferment with 62% boveda packs in jars. After another 3-4 weeks in the glasses, the 58% boveda packs come in for the final touch :-). Of course, the final update comes from the fermented end product 👍. Until then, I wish you all a lot of fun and stay healthy 🙏🏻 You can buy this Strain at www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez X Gelato 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.6 - 6.4 💦 💧

really good as very thing I had popped 100 seeds and they all popped percent :-),,,,, THANKS fastbuds

Simply put I am so very pleased with the way this plant has performed my only worry is how to properly dry and cure this magnificent specimen

It’s week 5 of flowering, and things are looking fantastic! The adjusted nutrients for the coco substrate have clearly made a difference, as both plants are thriving and continue to develop thick layers of trichomes. ✨ Interestingly, the non-LST plant is starting to show some unique color variations, which is surprising given that both are from the same strain. This unexpected twist adds a bit of excitement, and I’m curious to see how it will develop over the next few weeks. When it comes to scent, the differences are striking! The LST variant has a bold and distinct Lemon Haze aroma—zesty and citrusy 🍋💨 while the non-LST plant gives off a fruity-sweet smell that’s incredibly rich and inviting. 🍓🍭 Unfortunately, my camera broke this week, and now I’m dealing with some low-quality pictures. 📷😔 While it’s frustrating not to capture the plants in their full glory, I’ll do my best to document their progress as clearly as possible. Overall, both plants are doing great, and I’m looking forward to seeing how they turn out in the final stretch! 💚

Quite a lot of change in her this week. Buds have plumped up well and the pistils have started changing colour. Not sure how long left, I'm thinking a couple more weeks. P.S. she is mega frosty!!!!!!!!!!!!!!! 😎

Such an amazing flower, really great especially a phenomenal hash producer yall will be super satisfied with this one!! She’s a shorty but Make sure you top 4 to 6 times or even more to have all them gooey bud producing heads , Dirtyblonde is absolutely an amazing plant!!

This girl has been the surprise for me this run. She was more of a space filler than a chosen strain but my god has she impressed me. The structure of the plant is immense. So strong with super thick branches. Buds are very fat and very dense with a great frosting already. I'm looking forward to see how this one finishes.. I've run out of big fruits which is a flowering booster I use and have come to rely on for very dense buds.. I hope to get some more this week..🤞🏼 Uvb runs twice a day for an hour each session. X-Bars are at 55% and are giving an average of 1005umols. Feeds are at 1.8ec still. Last week for more pk then we will be just on bloom. Thanks for passing. Grow well 🌿💚🌿🙏🏼🌿

Harvest time! Chopped and wet trim, now she's drying in the rack. A real pleasure to grow, I am super excited to smoke this lady in 2 weeks! Thank you everyone for checking out my grow. Update June 23, the buds dries quickly, temps are warmer here so drying was quick. 59 grams on the scale, I'm happy with this amount and with the bud quality, size, smell and smooth taste/flavor when smoked. It was so smooth, I had to smoke 2 joints back to back, in order to get a good taste and smell profile. And munchies!! Whoa man does she make me hungry!

Привет всем моим друзьям с разных уголков мира. Я надеюсь своим примером, я показываю вам, то что партизанское движение возможно даже на вражеской территории, оккупированной клептократами. Если вы следите за мной, то вы знаете, что у меня подготовлено несколько партизанских отрядов. У меня было 40 растений Амурского гиганта, который родился в Амурской области, который входит в состав Дальневосточного федерального округа моей страны. Эти растения идеальны для выращивания на всей территории России. Я выбрал 30 самых сильный растений, которые проявляли гены гигантизма и вывез их за город на природу. Для того, чтобы удачно перевезти и трансплантировать 30 растений мне потребовалось очень много усилий, я расскажу вам об этом по порядку. Сразу оговорюсь, что у меня был один помощник, который выполнял всю физическую работу. Одному такое такой объём работы за один день сделать практически невозможно. Если вы один то, вы должны разделить свою работу на большее количество этапов, иначе вам будет слишком сложно. 1. В общей сложности ушло около 425 литров субстрата. Я взял 250 литров земли для цветов, добавил туда 115 литров вермикулита и около 60 литров гумуса – остатки жизнедеятельности дождевых червей. 2. Самым важным составляющим моего субстрата был гидрогель. Он удерживает до одного литра воды в течение 3 недель, даже перемешав его с землёй. У меня было 35 литров гидрогеля. 3. Так же у меня было порядка 30 литров чистой воды, в которые я добавил корневые стимуляторы и активаторы метаболизма. 4. Так же у меня было с собой немного перлита и пеностекла, но мне не хватило этих материалов на все растения. Но вы так же можете их использовать. После этого я выкапывал ямки, засыпал туда субстрат и добавил гидрогель, после чего трансплантировал растения. Мы приехали на место днём, но проработали на нём до самой ночи, пока на улице не стемнело. Как только все растения были удачно трансплантированы, мы удачно покинуло место, не включая фонарей или фар. Сейчас мне предстоит пересадить за один раз более 56 растений и перевезти практически 1000литров субстрата. Это крайне рискованно, но у меня нет другого выбора, так как была плохая погода долгое время. Если вам интересно следить за приключениями травки в России, подписывайтесь на мои дневники.

The Banana Purple Punch is looking fantastic as it enters its 7th week of flowering! After checking the trichomes, it’s clear this plant needed a bit more time to mature compared to others, but the wait has been worth it.🌱 This week, I’ve started flushing to prepare for harvest. If all goes as planned, it’ll be ready to cut and hang by the week after next. The buds are looking dense and frosty, and I’m excited to see the final result!😊 So far, everything is progressing beautifully, and I’m really happy with how this plant is finishing up.

Week 9 day 1 video pheno. Gonna chop this week Week 9 day 7 well chop this weekend so on week 10 Day 1-2. Just waiting on a light to reveg one. Everything is magic