6/18 added water, ph 6/19 Added 3ml cal mag banana, cookies Added water 6/20 added water, ph 6/21added water, ph 6/22 added 2ml bloom to banana 6/23 added water, ph 6/24 Added water and nutrients Runtz and cookies Bloom(Full strength)(new) Micro 0.75/L x 11.3=8.5ml Gro 0.50/L x 11.3=5.65ml Bloom 1/L x 11.3=11.3ml Cal mag 1/L x11.3= 11.3ml Bud candy 2/L × 11.3= 22.6ml Big bud 2/L x 11.3= 22.6ml Hydroguard 2/Gal x 3.5=7ml 3 gal = 11.3L 6/25 added water, ph Records kept here https://1drv.ms/x/s!AmTQ-7u9iyH6kDFcBT1QhRk7ttv4

This week I saw a pretty large gain in vegetation. At the moment I am unable to train the branches outward because I am out of space indoors, we are just under a month out from putting them outside for good; they have grown about 8.5 inches in height. I top dressed the medium with a 70/30 mix of Gaia greens all purpose 4-4-4 and power bloom 2-8-4 and continue to water with ancient earth every watering. It doesn’t seem to be in need of any cal mag so I have left it out of the watering schedule this week. I will continue time the light down every ten days by half hour to match the 16 hour day it will be when I bring them outside. So far I am very impressed by these ladies

Got some Nute burn my fault, caught it to late thought it was something else but do beleieve it was Nute burn. The high ppfd didn’t help either. They all bolted and are now flowering beautifully.

Growing strong and healthy!!!🙌

Hi all my growers friends) The buds are add many mass. They looking good as for me) the leaves starting yellow extremely fast. I think that harvest will be in 7-10 days. So about 1 week with light and 3 days with fully dark and finish). So I will add photos every 2 days. See you later...;) Day 66. I see progress every day... 8 days till harvest

Popped all 8 seeds from 420 fastbuds and put them into half a pint of water that had been stood for 24 hrs at room temperature. left them float in a dark cupboard, 2 days later all of them sat at the bottom of the glass with big tap roots so I planted them in their final 15L pots.

Now That at least 50% of pistils turned orange and that the smell and taste seem present i will start the flush and start gathering next week and try to get it done for Christmas... Cant wait to see the cured result! Big thanks to fastbuds for this beautifull strain! I had hard time finding the strain for my region as most of site where out of stock but it definitely worth it! Next update next week ;)

Day 37 - Hitting the ladies with a little LST. My cloner project took a bit of a backseat to life, so I'm a little late in the game to top these babies.... So I decided I'm going to do something I have never done before.... Let these plants grow naturally. Yeah, you read that right, I've never let a plant just grow out without some sort of fun training technique. Even my very first grow was riddled with aggressive plant shaping. This time will be different! This time I will be just doing some very basic LST to open up their branches to more light. I went in and stripped some of the inner growth sites that would have produced nothing but popcorn buds being so hidden from light. I then created anchor points around the grow bags by pushing toothpicks through the holes in the mesh. I like this because it gives me the ability to easily move around anchor points by simply sliding out the toothpicks and moving them where I please. I got the idea from seeing someone else use pushpins once, but I didn't have any on hand. And so, the toothpick hypothesis was born, and so far its working very well! Both ladies look much happier now that they're getting more light to their branches. The leaves on these Blazin' Skywalker plants are just so effing fat that they've been doing a solid job at blocking light to the branches. I tried doing some leaf tucking early on, but the branches just weren't quite long enough for me to properly tuck the leaves behind them and would constantly come un-tucked. I think we've found our happy place. 😊 Thanks for hanging with me, growmies! I hope y'all have a crazygonuts awesome day! ✌️💜🌱 Day 41 - Watered Maz with some 6.5 pH water. She had gotten a bit over watered so I let her go a few extra days between watering. The next morning, she let me know I did the right thing. 💜

Hi everyone :-) This week the buds developed super ;-) All are beautiful 😍. Super genetics 👍. Blue Cheese pheno 1 is slowly coming to an end :-) This week I will start to use up the remaining nutrients and harvest in 10-14 days ;-) Everyone else needs something else :-) have fun with the videos, stay healthy 🙏🏻 and let it grow 🌱

Looking For a Keeper cream of the crop seeds purple paralysis 10th March 2021 So Far So Good for these two , it hasn't rained again since the last downpour but the clouds hanging around this afternoon look very ominous indeed. 😐 I only water early morning now so that the soil is fairly dry again on top by the time the sun sets in the evening. this is to limit the extra moisture that could hinder the plants resistance to mold . I also gave them a good old feed of my Worm castings tea mixed with Mollasses & Seaweed mix. 💪💪 Cheers for stopping by 👍

Avevo staccato due cime per pianta delle kmintz. Mantengono quello che sentivo mentre le toccavo. La prima pianta sa di caramelle zkittlez con un fumo che nell aria non è il classico odore di erba ma qualcosa di incensato e mi fa impazzire.La seconda è decisamente più complessa. Zkittlez/frutti di bosco/nocciola/gas. Ho scritto oggi a Ripper Seeds facendo vedere un po di foto e mi hanno detto di tagliarle pure anche se manca qualche giorno rispetto ai 63 dichiarati dalla casa.Ho già ricomprato 5 semi perché le rifarò sicuramente se non il prossimo ciclo quello dopo. Le due Watermelon Zkittlez proseguono la fioritura. A settimana prossima coltivatori 💪🤞

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

Woche 4 bricht an und es läuft hervorragend! Die Orange Sherbet bekommt diese Woche frischen Boden: eine Mischung aus Bio-bizz All-Mix und Greenhouse-Feeding, perfekt für die letzten Vegetationswochen und blüte. Zudem hat sich die Orange Sherbet sehr gut mit dem Backhefe-Buttermilch-Melasse-Experiment entwickelt, was zu einem starken CO2-Anstieg auf bis zu 1500 ppm geführt hat. 💨 Ich bin gespannt, wie sie sich in der neuen Umgebung entwickeln wird. Auf der anderen Seite explodieren die Frozen Black Cherries förmlich in der Hydroponik! 🌱 Die Entwicklung ist beeindruckend, und ich könnte nicht zufriedener sein mit ihrem Fortschritt. Die Blütephase rückt näher, und ich bin gespannt, wie sich alles weiterentwickelt! Ich halte euch auf dem Laufenden! 🚀 Week 4 is here, and things are going great! The Orange Sherbet is getting new soil this week—a blend of Bio-Beth All-Mix and Greenhouse-Feeding, setting her up perfectly for the final weeks of vegetation and . Additionally, the Orange Sherbet has responded well to the back yeast-buttermilk-molasses experiment, resulting in a significant CO2 increase of up to 1500 ppm. 💨 I'm excited to see how she adapts to her new environment. Meanwhile, the Frozen Black Cherries are absolutely thriving in hydro! 🌱 Their growth has been phenomenal, and I couldn't be more impressed with their progress. The flowering phase is getting closer, and I can't wait to see how everything unfolds! I'll keep you updated! 🚀

Started the girls with some LST to see how they all coped and they bounced back well.

Day 26 of flower, plants are looking beautiful, no signs of stress

Transplant into 1 gallon plastic pot mycorrhizae for less transplant shock with coco coir had to buffer a brick for 18 hours submerged in calcium after couple days went organic for less of a headache of wasting money on nutrients to make it simple and effective control system 1 plant is showing deficiency working on bring it back to optimal used compost tea with silica , fish fertilizer Neptune , soil recharge every week ph to 5.8-6.0 1 gallon 1 cup water per plant bigger plants get 2 cups want less run off after 2 week to get the calcium out from the buffer solution added 2-84 geia green and 4-4-4 1 tsp per plant of each dry amendment water every day so coco doesn’t get dry roots are healthy on the bottom of gallon pot you see new growth soon thinking of transplanting for better results during flowing stage currently photo and auto soon cross breed some of them during flower for new future projects ,

So there's a few things going on here. First, im not entirely sure if this is amnesia. I started 3 grows at the same time and have forgotten to label them when i've repotted them. This is the most sativa out of the batch of 3 (others are girl scout cookies and monster skittlez) and its supposed to flower for 12 weeks or something like that. However, this is week 7 of flower (or possibly 8, still finding it difficult to pinpoint that) and looking at the trichromes i have a feeling that she is ready for harvest. I'm hoping you guys can help me out here - so theres two questions id like to ask: - does this look like an amnesia fotoperiod plant? and, - according to the trichrome shots : is she about ready for harvest? thanks!