Likes
Comments
Share
Likes
27
Share
I had a lot of fun with this strain and it was grown against 400 growers so let me say PHENO hunting is a true thing. Overall the Bud was a nice dense structure and the smoke on it was smooth and the high nice and even.
Likes
3
Share
Was doing main folding this whole time thinking it was LST but did it to encourage more equal canopy and chance for other bud site to become more dominant. Also it feeds about .8 gallon every 24of solution mix and some times water
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
5
Share
@Wenz004
Follow
Hello gromies Week 11 goes to the end tropicana No3 is ready for cut...tomorrow tropicana No2 (dont believe that fast buds delivered tropicana) seem to need longer both grows with different living soil types...explanation see week1 by the way I like a bit overripped!
Likes
16
Share
Seedling managing 93F 30%RH, around 20 DLI. Vpd is in the 3's. No I don't recommend. Signum Magnum. "A great sign appeared in the sky a woman clothed with the sun with the moon under her feet and on her head a crown of twelve stars. Sing ye to the Lord a new canticle: because He has done wonderful things. Glory to the Father, and to the Son, and to the Holy Spirit As it was in the beginning, and now, and ever shall be, world without end." The plant nutrient nitrogen exists in forms with both positive and negative charges. Ammonium (NH4+)(immobile in soil)(Cation) has a positive charge, while nitrate (NO3-) (highly mobile in soil)(Anion)has a negative charge. Nitrogen is unique among plant nutrients in that it can exist in both positively charged (ammonium, NH₄⁺) and negatively charged (nitrate, NO₃⁻) forms in the soil. This makes it a special nutrient. In that it is responsible for providing balance for reactionary trade offs when it comes to ph. Because ph itself in the medium will always slowly drift towards acidicity, such is nature. 80% of nitrogen should be nitrate and no more than 20% ammoniacal nitrogen. Ca, mg, and K are the big 3 cations related to soil composition, pH & base saturation. When nitrogen is in the form of ammonium, it can compete with calcium, magnesium, and potassium for absorption sites in the plant root. This competition can lead to a reduction in the uptake of these other essential nutrients. Nitrogen, particularly in its nitrate form (NO3-), can increase soil acidity, which can also affect the availability of calcium, magnesium, and potassium. The form of nitrogen applied (ammonium vs. nitrate) can influence its interactions with other nutrients. Ammonium nitrogen can have a more pronounced negative effect on the uptake of calcium, magnesium, and potassium compared to nitrate nitrogen. Common forms of ammonium nitrogen include ammonium ion (NH4+), urea, and ammonium compounds like ammonium nitrate, ammonium sulfate, and ammonium phosphate. Common forms of nitrate nitrogen include potassium nitrate (KNO3), sodium nitrate (NaNO3), calcium nitrate (Ca(NO3)2), and ammonium nitrate (NH4NO3). Phosphorus is an essential plant nutrient, and its availability in the soil is strongly linked to the presence of oxygen. Plants primarily absorb phosphorus as phosphate (PO4), and oxygen is a key component of this molecule. Furthermore, the availability of phosphorus in the soil can be impacted by factors like soil aeration and temperature, which in turn affect the oxygen supply to the roots. Phosphorus uptake in plants is most critical during the early stages of growth, particularly within the first few weeks of plant development. Young plants actively growing tissues have a high demand for phosphorus. They may absorb up to 75% of their total phosphorus requirements within the first few weeks of vegetative growth, with up to 51% of uptake happening overnight, primarily in the first few hours or early nightfall. ⑨Anaerobic root respiration, or respiration without oxygen, is detrimental to plants because it's less efficient and produces toxic byproducts, leading to reduced energy production, nutrient uptake issues, and ultimately, root damage and plant stress. ⑨Anaerobic respiration, unlike aerobic respiration, doesn't utilize oxygen as the final electron acceptor in the electron transport chain. This results in a significant drop in the amount of energy (ATP) produced, which is necessary for various plant functions, including growth, nutrient uptake, and maintenance of cellular processes. ⑨In the absence of oxygen, plants produce byproducts like ethanol and lactic acid during anaerobic fermentation. These byproducts can be toxic to the roots and inhibit their function, ⑨When oxygen is depleted in a medium, the pH tends to decrease (become more acidic) due to the production of metabolic byproducts. This is particularly relevant in biological systems where aerobic respiration relies on oxygen as the final electron acceptor. ⑨When oxygen is scarce, plants may switch to anaerobic respiration. This process produces carbon dioxide (CO2) as a byproduct. ⑨CO2 dissolves in water to form carbonic acid (H2CO3). This acid lowers the pH of the medium, making it more acidic. ⑨Anaerobic conditions can impair a plant's ability to regulate its internal pH, leading to a drop in cytoplasmic pH and potentially cellular acidosis. ⑨The change in pH can also affect the availability of certain nutrients to the plant, as pH influences the solubility of micronutrients like iron, manganese, zinc, copper, and boron. ⑨The lack of oxygen in the plant medium leads to a decrease in pH due to the production of carbon dioxide during anaerobic respiration and impaired pH regulation within the plant. In plant cells, cellular acidosis, a drop in the internal pH of the cytosol, is a significant stress response, particularly during conditions like flooding or hypoxia. This acidification can be triggered by a decrease in oxygen levels, leading to the production of metabolic byproducts like lactic acid and CO2. The plant's ability to tolerate and recover from these conditions depends on its cellular mechanisms to regulate pH and mitigate the effects of acidosis. When plants are subjected to low oxygen environments, such as those experienced during flooding, anaerobic metabolism, which produces lactic acid and ethanol, becomes the primary source of energy. This can lead to a build-up of these acidic metabolites in the cytosol, causing a drop in pH. OXYGEN Atomic oxygen (single oxygen atom, O) is the lightest form of oxygen, as it has the lowest mass of the oxygen molecules. Oxygen also exists as a diatomic molecule (O2) and an allotrope called ozone (O3), which have higher masses due to the number of oxygen atoms combined. Atomic Oxygen (O): This refers to a single oxygen atom, which is the most fundamental form of oxygen. Molecular Oxygen (O2): This is the common form of oxygen we breathe, consisting of two oxygen atoms bonded together. Ozone (O3): This is an allotrope of oxygen, meaning it's a different form of the same element, consisting of three oxygen atoms bonded together. Since atomic oxygen has the fewest oxygen atoms, it naturally has the lowest mass compared to O2 or O3. Ozone (O3) Lifespan: Ozone has a relatively long lifespan in the stratosphere, particularly at lower altitudes. For example, at 32 km in the middle latitudes during spring, ozone has a lifetime of about 2 months. Oxygen (O) Lifespan: Atomic oxygen, on the other hand, has a much shorter lifespan. At the same altitude, its lifetime is about 4/100ths of a second. Ozone-Oxygen Cycle: The ozone-oxygen cycle involves the rapid exchange between atomic oxygen (O) and ozone (O3). UV radiation can split molecular oxygen (O2) into atomic oxygen (O), which then reacts with O2 to form ozone (O3). Ozone can also be photolyzed by UV radiation, creating atomic oxygen again, which can then react with O3 to reform O2. Dominant Form: The partitioning of odd oxygen (Ox) between ozone and atomic oxygen favors ozone in the lower stratosphere. This means that a much larger proportion of odd oxygen exists as ozone than as atomic oxygen, especially in the lower stratosphere. Recombination: Atomic oxygen has a high energy and reactivity. When it encounters another oxygen atom, they can combine to form O2. This process releases energy, contributing to the heating of the atmosphere. Ozone Formation: Atomic oxygen can also react with molecular oxygen (O2) to form ozone (O3). Ozone plays a significant role in absorbing harmful UV radiation. Other Reactions: Atomic oxygen can react with various other molecules in the atmosphere, like nitrogen (N2), water (H2O), and carbon dioxide (CO2), forming different compounds. UV light below 240nm (peak 185nm) creates ozone (O₃) through a process called photolysis, where UV light breaks down dioxygen molecules (O₂) into single atomic oxygen atoms (O). These single oxygen atoms then react with other oxygen molecules to form ozone (O₃). Specifically, UV-C light with wavelengths shorter than 240 nm can cause this photolysis. UV light with wavelengths between 240-280 nm, (peak 254 nm) breaks down ozone (O₃) into dioxygen molecules (O₂) and atomic oxygen atoms (O). 280nm does not have the energy potential to break apart the stable bond of (O₂) into enough (O) to make (O₃) At ground level, atomic oxygen (single oxygen atoms) has a very short lifespan. This is because it's highly reactive and quickly combines with other molecules to form stable diatomic oxygen (O2) or other compounds. While the exact timeframe varies depending on the specific circumstances, its lifespan is typically measured in nanoseconds or picoseconds.
Likes
7
Share
@Fonzi
Follow
Sie duften sehr lecker. Die Jacky White sehr zitronig. Strawberry ak riecht fruchtig nach Erdbeere.
Likes
84
Share
I harvest her today and got 396,39g wet flower! I am super happy with my first grow! The LST and topping was a wonderful combination. I couldn't weight all together, because I didn't have a big enough bowl to fit all. Update: I got 88,02g weed after drying. Update: After trimming I got 61,39g left. With the 26,63g Trim i am going to make ice Hash.
Processing
Likes
2
Share
Royal Queen Seeds blew me away with their genetics last grow. So much so I'm growing the Gorilla again along with another 2 of their strains including this one, their Purple Queen. Just water week 1.
Likes
3
Share
@Takeaims
Follow
Defo going keep going with f1 I have more still growing and there the biggest plants I've had thanks zameizia you guys are amazing
Likes
8
Share
@Kirsten
Follow
19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. Thanks for checking out my diary 🍃 ✌️
Likes
18
Share
Hi 😌 beginning of week 8, the gagarin auto (2 gallon pot) is getting closer to the finish line so is the white widow auto, the gurilla glue took two weeks and still berly recovered from over watering. The gelato's doing great.
Likes
4
Share
Welcome to week 2 of flower on this lovely project! The ladies are stretching like crazy and it won't be long till we see some lovely flower tops starting! Some really cool genetics featured this run by a really cool breeder Hidden Vault Genetics. Genetic breakdown: Banana Smoothie ( Banana Split x G.O.S ) Creamy Cereal Crunch ( Watermelon Z x G.O.S ) MacMelonz ( Mac Burger x Zour Watermelon ) Huge shouts go to both the breeder and @MarsHydroLED for the awesome gear they make! Huge huge shout out goes to all my followers and supporters you guys inspire me to become the best grower I can be! Be sure to follow along for the latest updates cause this shows getting juicier by the day! -The Projexx Day#8F Put in net , trained down some of the taller plants. Plants are stretching along nicely. Day#9F Plants bounced back from the scrog training very quickly. They're picking up the pace with stretching! Day#10F Plants are just bursting in new growth, Creamy Cereal Crunch is getting huge! Day#11F We got the start of cotton balls going! Day#12F Pictures N/A. Ladies continue to explode in growth, defoliated some of the older leaves that aren't getting any light. Day#13F The ladies continue their stretch! Creamy Cereal is absolutely beasting out! Day#14F Cotton balls are getting bigger and bigger. Plants continue to stretch with minor signs of slowing down. Recap: Things went extremely well this week , the plants absolutely exploded in growth and have developed cottons balls. With some time left on the stretching period and lots of time left overall on this grow I'm very excited to see the end results with these cool genetics.
Likes
43
Share
Venerdi 29/03/2024 Inizio controllo Ec 3844 ph 4.6 Aggiungo 50 lt acqua osmotica Ottenendo Ec 2133 ph 5 Aggiungiamo dose per 60 lt 48 grow 96 micro 144 bloom 60 cal mag 60 sensizym 60 rhino skin 60 bud candy 60 bud factor x 60 big bud 60 g megabud Ottenendo Ec 3114 ph 5.9
Likes
7
Share
Likes
5
Share
Had to go another week in veg but damn these plants look good! Transplanted 2 of the snowcandy late and put them in 5 gallon pots instead of 3 gallon and I’m using dry amendments for these 2. The other 4 will be fed liquid nutes. Switching to 12/12 next week!
Likes
13
Share
@Ghosttown
Follow
After 48 hrs darkness I've finally trimmed buds to prep for hanging. Plant 1 .82kg wet weight Plant 2 .88kg wet weight Plant 3 .77kg wet weight Total wet weight incl stems 2.47kg or 2470g Equate to 5.438 lbs wet weight. I can't wait to see dry weight. I'll be happy with half loss in water.
Likes
2
Share
She is growing well, has been a few weeks of hot weather and shes a bit dramatic but doing good. Has great sativa structure, long skinny leafs, but thick sturdy stems. I'll scrog next week and spred out the growth even more.
Likes
32
Share
@Grey_Wolf
Follow
High Level x Peyote Wifi First Run 1 week from germination 11th april 2020 Welcome back to my first attempt at growing out a couple of my little creations 😎 Both Plants are up and doing nicely. I will feed them today with a Qtr strength mix of Organic Grow Nutrients , That should be enough to keep them happy for now. That is all I have to report for now so keep safe and I will see you next week with another Update .