Recommended
Likes
Comments
Share
@Luke_Lee
Follow
————————————————————— WEEK 9 / DAY 58-64 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 40cm Schedule: 18/6; PPFD: 1050-1150umol/m2/s 19° C - 45 RH 1L per Plant PH 6,5-7 4ml BioGrow; 4ml TopMax ; 4ml BioBloom 1ml CalMag #1 Blueberry Automatic #2 Blueberry Automatic Fan, extractor and pump ON 24/0. ————————————————————— -17.03.2025 The fourth week of flowering begins. Everything is going great, so far there have been no complications apart from the defects on one of the Blueberrys. From this week onwards, the quantity of BioGrow, BioBloom and TopMax is increased to 4ml/1L. The lamp is also turned up, the measured value with the PhotoneApp is 1050-1150. -19.03.2025 Both plants were watered with 1.5 liters of water with fertilizer each. In addition, an extra fan is now running for better air circulation. -23.03.2025 The next week is coming to an end. The plants look good, the buds are growing and getting nice and frosty. I think the week after next will be the time to harvest the ladies. Both plants were watered the last time with 1.5 liters of water and fertilizer mix. From next week only clear water.
Likes
307
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies keep growing well. The burned has been recovery, Still the mutation on the #1, since the 3rd nodes, she's doing 1 leaves instead of 2 per nodes, really strange, maybe I could recover with toping and hoping the secondary stems will develop 2 leaves per nodes. Starting nutes and give more and more water. 💪 No Training for the moment, just let Grow. 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 0.25 l Water + Roots + Grow (1 + 2 ml/l) 0.25 l Water + Roots + Grow (1 + 2,5 ml/l) 0.4 l Water + Roots + Grow (1 + 3 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 77 cm. Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Processing
Likes
11
Share
@Andres
Follow
just wait ... its growth. it's ok ... it's in a small greenhouse in a bottle ... now see how it behaves in the last remaining summer ... in the open air ... it has good color ... and I see her happy...
Processing
Likes
11
Share
Looking good. 2-3 weeks to go. PH is great. Starting to really make resin glands. Smells great
Likes
22
Share
Not much to say. Buds developing nicely. Just the stems tied lightly away from center letting more light and air into the middle. Im really happy with the look so far.
Likes
42
Share
Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 35 since time change to 12/12 h. Hi everyone :-) . We got lost in the middle of bloom. The buds are developing really well 😁. The scent gets stronger every day when you open the tent . I watered it twice this week with 1.2 l each time (see table for nutrients). Almost every leaf was examined for animals and diseases. Everything looks great 👍. I'm really looking forward to the coming weeks and I wish you all a lot of fun until the next update. Stay healthy 🙏🏻 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
4
Share
Likes
14
Share
Ho allungato qualche ramo verso l'esterno, stanno andando piuttosto bene :)
Likes
79
Share
-Sensi Seeds Research: The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week 8 finished, this is where Vegging longer Indoor starts to become a waste of time,energy and money, you can go for another last week if needed but any longer than 9 weeks makes no sense ! By the way there’s just enough space left between top of canopy, the lamps, and ceiling for the Flowering stage ( keep in mind that the plants will stretch about twice in size during the stretch phase ), meaning it’s really the time to switch to 12/12 ( otherwise the plants will finish too close to the light ). For now on, the genetics are excellent, even the Black Domina didn’t mind to be topped. Seams like everyone is suitable for the ScrOG method, almost every holes are occupied by a shoot, the trellis is full at around 90 to 95 % , at least all the light coverage is used which is the main goal to reach ! Had to fed them on the 24/08 and watered them on the 27/08 to keep the soil moist but not dampened ! It’s Ganja, not water lilies in a swamp ! Unfortunately, there’s no perfect schedule for watering plants. The quantity needed by cycles depends on the size of your pots, the size of your plants and the environment, and the rule is the same for the period between two cycles. This is where you can be the only judge and you must learn to read your plants leaves (overwatering symptoms: droopy leaves with some kinds of speed bumps between the veins). So technically, this is where if you work in a Grow Operation, the Boss is happy, you’re killing it with just two conventional 600w fixed on large wings and no professional lightening equipment like Gavita’s 😎 Stay tuned folks, just hit the like button and subscribe for the incoming Stretch and Bloom stage 😉 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control 🐞)
Processing
Likes
42
Share
@Dunk_Junk
Follow
She's filling out nicely this week. On she goes!
Likes
88
Share
@No_Clout
Follow
Starting to flush on Day 70 then gonna chop ‘em down in a week or two, looking great so far and smells amazing when u open the tent, real frosty and dense some nice indica buds. Their starting to get a purple hue on the flower and also the leaves are going a nice purple/yellow I’ll update soon. ✌️🏻👌🏻 01/10/18 - it’s day 75 and all is good did some late night Defol and their looking beautiful and stunk out my flat (hence it was a nighttime job)
Likes
16
Share
The plant have been harvested when this dairy was updated. The final result and the dry weight will be posted when the drying stage have been done. thank you for following our dairy this season, hopefully we will make the new dairy for next season soon.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
15
Share
@Lazuli
Follow
April 27: start of week 3 (day 15) i pick off fanleaves here and there not all at once, one last heavy defoliation at the end of the week The cannopy is 40cm deep and 80cm diagonal
Likes
35
Share
Have been waiting to upload the results of ma swazzenger teqnique a took a chance n hopefully it pays off man juicy chronic is the strain a like it so far hope for decent harvest but hav learned a lot n am happy for the support of ma fellow growmies tips n advice knowledge is power
Likes
54
Share
Likes
2
Share
@Ferenc
Follow
Day 72: 600W LED, 18 hours on 6 hours off the same with ventilation. Water intake also remains the same 200ml per day. Humidity approx 35 percent. Day 74: I started flushing next week is harvest time :)