Likes
Comments
Share
@OS_Farmz
Follow
Since high colas have already a good colour i thing to start flushing from next week to cut them in 14 days.
Likes
4
Share
@Luke_Lee
Follow
-06.04.2025 Today is the day. After a thorough examination of the trichomes, I decided to harvest the two Blueberry Automatics. After a total of eleven weeks. The wet weight of the flowers of Blueberry#1 = 77 grams, Blueberry#2 = 74 grams. The flowers are now hung out to dry and will be weighed again in 7days. -11.04.2025 After 6 days the Blueberry Automatics are dry. The branches broke directly when bent with a nice cracking sound. The dry weight of both plants together is 34g. The flowers were stored in jars for curing with a humidity packet from IntegraTM and a hydrometer. Total Time: 1879,36h Total Energy: 326,30kWh 1kWh: 0,30€ Energy Cost total: 97,89€ 💚
Likes
Comments
Share
Questo è stato il mio primo ciclo indoor della mia vita ho ottenuto 40 grammi o più a pianta tutta trimmata essiccata e tutto.
Processing
Likes
39
Share
@G4NJAG4NG
Follow
100419Day 70 flower 28 - switched fully to bloom nutes now and they are all starting to slowly fatten up, they are all turning lovely and frosty and the size of laughing Buddha on the middle is crazy, she is my monster 👌😁 140419 - changed feed to 2.5ml/l bloom 1.5ml/l bud candy and 1ml/l Calmag, half way through flowering and leaves are starting to turn yellow, don't think I have added enough bloom therefore lack of nitrogen in the soil. Buds are increasing in size however. 150419 - I think zkilltez of will be ready soon, trichomes are cloudy with a few amber , began 10 day flush today feeding 4 litres of 7.0 pH water every day now till the 25th which will be harvest day 😎
Likes
8
Share
Likes
21
Share
@BLAZED
Follow
W15 (9-5 to 15-5) 9-5 Temperature: 24.6 degrees (lights on) 20.3 degrees (lights off) Humidity: 70% (highest) 46% (lowest) Watering: None. No pictures. 10-5 Temperature: 25.2 degrees (lights on) 20.8 degrees (lights off) Humidity: 67% (highest) 44% (lowest) Watering: 1000 ml. 11-5 Temperature: 25.4 degrees (lights on) 19.8 degrees (lights off) Humidity: 67% (highest) 36% (lowest) Watering: 1000 ml. No pictures. 12-5 Temperature: 25.9 degrees (lights on) 20 degrees (lights off) Humidity: 59% (highest) 42% (lowest) Watering: 1500 ml. Set the strength of the light to 95% 13-5 Temperature: 26.8 degrees (lights on) 20.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) Watering: 1500 ml. No pictures. 14-5 Temperature: 27 degrees (lights on) 19.2 degrees (lights off) Humidity: 68% (highest) 41% (lowest) Watering: 1500 ml. 15-5 Temperature: 26.1 degrees (lights on) 19.8 degrees (lights off) Humidity: 67% (highest) 43% (lowest) Watering: None.
Likes
7
Share
i am pretty sure we are produceing many seeds here..... anyway, lets see how the babys will be. flower day 39 - found spidermites on the triple g and had to take many leafs off. also ordered some predatory mites and did some other changes to hope to prevent the outbreak.
Likes
35
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
3
Share
Lil youngin on their way home should be home for 4/20 along with 2 of their mother...as for the breeding project pollination is a success also been harvesting pollen(feminized) for later use Mothers are growing well jus to continue cut and set aiming for about 1000 already cut 3 and got 100...happy growing
Likes
5
Share
@Thedibber
Follow
13/06/25 - Gorilla cookies all sprouted. Little did I know the headache I would have from now on stunting plants and going down the rabbithole of trying to fix everything at the same time instead of taking a step back checking my carbon filter wasnt blocked until 07/08/25 😭
Likes
211
Share
@PapaNugs
Follow
Transplant time! Got these girls into a three gallon container with added mycos and bacteria. My custom mix is coco and perlite with added amendments, worm Castings and purple cow soil. I add dolomite lime on top and mix it in. They got a small watering.
Likes
5
Share
Damn 1 of my Grand daddy Purp plants is growing like its life is depending on it lol. As you can see I swapped out that cob light and added my SE-3000 to the room so that I'm running all Spider-Farmer lights during flower. I put it over that tall GDP because I can let the plant get a lot closer to ot then one of my SF lights. I have to say when it comes to what I consider Amazon Special grow lights (Mars Hydro, Phlizon, Spider-Farmer, Viparspectrum, Etc) Spider-Farmer is by far the best. The SF-4000 light I have is still running at 100% after using it for roughly 10 grows now. Other LED brands I've ran only lasted 2-3 grows before they needed to be replaced. I've had the SF-2000 for just over a year now and it's got about 4 grows on it and again still working 100%. Now I just finished my first run in my 3x3 with the SE-3000 (last 2 weeks I'm running a blurpe LED light to see how it effects the potency) and I was extremely happy with thw outcome of the light. For only 300w I feel like it did a better job then my 450w SF-4000 light in my 4x4 tents. The humidity levels and temperature have been doing great all week during day/night even with temperatures outside dropping to 3c. I'm expecting November/December/January to be very difficult out here to try and keep the temp up. So what I might do is run a 400W HPS light in my 3x3 next go around during the day to keep it warm and then run the main room at night with the LEDs. We'll see what it's like when I get there tho. Also thinking of moving the 2x2x4 to the main room and putting my 2x3x5 tent were it is. Again tho we well see. Well that's all for now. So happy growing everyone!!!
Likes
12
Share
Day 8 - First official day of veg and both ladies are looking good and on schedule for a couple of changes. Nutrients: 10ml of Hydro A & Hydro B were added to both buckets (10L of water in each bucket) PH: the Milwaukee PH controller was set to work - starting at a PH of around 7.6 - 7.8, it slowly worked down to a perfect 6.0 over about 50minutes. Lights: The lights were readjusted to be 60cm from the seedlings who are all between 8-10cm tall and the intensity of the lights were increased to about 70% brightness. Day 9 - Both plants are taking nicely to the adjustments and I am happy with the progress. Temp and humidity are stable and PH is controlled. Day 11 - The second nodes are clearly visible today for both Chong and Max which would hopefully put them at 3 nodes by the end of the week - right on schedule! Day 13 - The ladies seem to be showing some signs of heat stress, so thinking about adjusting the lights after their period of dark today because they are due to be adjusted tomorrow anyway for the new week of veg
Likes
12
Share
@Wilstang
Follow
Shout-out to the award winning Spliff Seeds for the amazing opportunity to test there phenomenal strains. This one of a kind company has so much to offer from great customer service to unique one of a kind strains. They have many top notch new and classic seeds to choose from. It's an honor to grow this seed 🌱💪
Likes
74
Share
@Mr_Maes
Follow
Nothing but colas on all 3 this is going to be a big harvest. Another 2 or 3 weeks max.
Likes
3
Share
3-11-2019 This Northern is slowly bouncing back but the damage has been done, she is producing but not how I would like it. Hopefully she will produce some tight buds. 5-11-2019 Pump Quit- Not much I can do at this point other than go it as Deep Water Culture. Root mass is to well established to attempt a removal.
Likes
5
Share
Day 9 plants looking great all green already seeing bud sites forming! Can’t wait to see the buds on these girls! Again check out General hydroponics their nutrients are the best out there!
Likes
20
Share
THE FINAL STEP🍯 Nach 6 Tagen der Trocknung hab ich das Bubblehash weiter verarbeitet☘️ Dafür hab ich eine Grasspresso V2 mit 2 Tonnen benutzt die Super easy zu bedienen ist 😅 Ein 35mikron Bag von Graveda war ebenfalls von Nöten! Gefüllt hab ich das Bag mit 2g vom Hash und unter die Presse gelegt, gepresst hab ich mit 85 Grad und den Timer auf 300 Sekunden Die ersten 30 Sekunden hab ich nur mit den Platten das Material erwärmt und dann langsam angefangen zu pressen, ca alle 20 Sekunden wurde der Druck erhöht und ja was soll ich sagen :) Seht selbst 🍯☘️🍀💚
Likes
9
Share
@pzwags420
Follow
On day 1 I adjusted the PH from 6.6 to 6.2. The tallest cola is 13.75" away from light. On day 2 I adjusted the PH from 6.4 to 6.2. The tallest cola is 12.5" away from light. On day 3 the PH is 6.2. The tallest cola is 11.5" from the light. On day 4 I didn't take data points long day... On day 5 the rez PH is 6.2. the tallest cola is 10" from the light. On day 6 the rez PH is 6.0. The tallest cola is 9.5" from the light. I defoliated heavily to bring in more light and airflow. On day 7 The tallest cola is 9" from the light. I mixed up a new rez.
Likes
Comments
Share