Recommended
Likes
Comments
Share
04/06/25: Twelve days after placing cuttings into the Clone King, all clones have successfully developed roots. Early signs of rooting appeared on day 6 for a few of them, and by day 10, every cutting had begun pushing out roots. While root vigor varied across the group, the consistency of success at this stage is encouraging and speaks to the reliability of CloneX and the aeroponic method when paired with clean RO water. I selected five of the healthiest clones to move forward, potting them into 1-gallon containers. Three of those came from PL4 and two from PL1. One plant from each genotype will be kept as a new mother plant to preserve the genetic lines for future projects. The remaining three—one PL1 and two PL4s—will continue on as part of this grow journal through flower. One of the PL4s is being designated for chemical reversal. The goal is to induce hermaphroditism in that plant and produce feminized pollen, which will then be used to pollinate both the PL1 and the second PL4. This will allow me to create both outcrossed and selfed feminized seeds, as well as collect and store the resulting pollen for future use. Four of the selected clones were transplanted into 1-gallon AirPots, with the fifth placed in a fabric pot since I’ve temporarily run out of available AirPots. All were planted in Roots Organics Original soil, which I pre-moistened before transplanting. Introducing rooted clones into dry soil can create unnecessary transplant shock—roots prefer contact with a moist medium from the start to ease the transition and promote uptake. Now that they’re in soil, the focus will be on recovery. Moving from an aeroponic environment into a dense medium is a stressful shift for the plants, and while some temporary drooping or slowed growth is expected, I’m looking forward to seeing how quickly they bounce back and resume vigorous vegetative growth.
Likes
6
Share
Likes
5
Share
@Chisinh0
Follow
Hola a todos! Esto va por la semana 12 desde la germinación, subo fotos y video seguimiento, espero alguien me pueda dar algún consejo (faltan algunas fotos recientes que subiré pronto). Un saludo y gracias
Processing
Likes
13
Share
@neuraxis
Follow
Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.
Likes
1
Share
@Lanek
Follow
very easy and pleasant lady. Recommended, I didn't do much, some training, some defoliation, not much. It smells beautiful, has beautiful colors, hard and large flowers and a very fast lady
Likes
19
Share
@AsNoriu
Follow
So those girls were transfered from main room, theirs veg story you'll find in Checkpoint diary by Sweet Seeds. In reality they veged for 5 weeks, beans didn't want to sprout, so planted two more. One from first two- didn't make it... Everything with them postponed a bit and i decided to try out other training method and new version/interpretation of FIMing. They got 30 hours of darkness, looked sad a bit, but just 3 hours under new sun - they are happy as f@ck again ;))) Will feed them later today with full range of BioBizz. Will update charts. Day 6. Girls loved food, no big stretch yet ... Happy Growing !!!
Likes
11
Share
Her leaves are forming perfect…you can see the kush genetics from her broad leaves.
Likes
8
Share
One of the biggest harvest in my life from 2 plants. Almost 800g dry buds Ak 47 one love. Ak 47 for me is one of the best strains from classic.
Likes
2
Share
@BOTAN1ST
Follow
Top row, left to right: Radical Juice, Mona Lisa, Challah Cake Bottom row, left to right: Sexbud, Blueberry Muffin, SAD Afgani The plants are still stretching quite a bit right now, with some of them naturally more than others. So we placed something under the smaller plants to ensure they all receive the same amount of light. Day 33: First fertilization: EC 1.1, ~60 mg/L nitrogen. Purpose: Mild feeding to observe plant reactions. Day 35+: Observation: Slight interveinal chlorosis (yellowing between leaf veins). Response: Added 0.25g of Epsom salt per liter of water. Change: Epsom salt now added with every watering. Day 36: Light fertilization again: EC 1.2, 77 mg/L nitrogen. Adjustment reason: Increased nitrogen as lower leaves started yellowing due to small (1L) containers. Plant Note: SexBud Issue: Developed male pollen sacs again, as in the previous grow. Action: Pollen sacs were removed; the plant will be monitored. Next Step: If more male flowers appear, the plant will be removed.
Likes
22
Share
@Fresco
Follow
The second week of flowering. Buds started to form. Again I am not at home and I can not control the growth .. the bushes are already very close to the lamp, and this is just the beginning.
Likes
18
Share
@rhodes68
Follow
8/23 All is well and a little distraction into oddness 8/25 satisfied with her progress in flower, no fade anywhere ever but this strain does not fade hard. Running her as long as she will go and keeping a steady supply of nuets to her, gotta love organic PS Zombie Quasimodo continues to build colas and first buds with a monster-cropped kind of look. Our little diversion into the odd is actually giving me ideas about monster cropping in the future, bud sites almost everywhere on the branches. pic later 8/28 D54 Still going and building bud Fed a 1 to 3 mix of biogrow and bloom nothing else The zombie is still kicking looking well if odd
Likes
26
Share
DONT NEED THE 5X5 TENT NOW, ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MORE MAJOR DEFOLIATIONFOR THE 3RD WEEK. SO THE LIGHT CAN PENETRATE THE BOTTOM BRANCHES. NOT MANY LEAVES LEFT LOL. ONLY 3 AUTOFLOWERS LEFT TO CHOP. AFTER DOING THIS THIRD DEFOLIATION, FIMING, TOPPING, LST AND HST IM GOING TO SWITCH THE LIGHT TO 12 HOURS IN THE NEXT FEW DAYS. ALMOST EVERY PLANT HAS PRESEX HAIRS SO THEY ARE GOOD TO GO FINALLY STARTING THE PHOTOPERIODS AND I HOPE MY TIMING IS GOOD FOR CHOPPING THE AUTOFLOWERS..........SEEDS PUT INTO THE SOIL ON JUNE 22ND. RUNNING OUT OF ROOM IN THE 8X8 TENT SO I PUT ALL THE PHOTOPERIODS IN THE 5X5 WITH A TSW2000. SOME FAN LEAVES ARE BIGGER THAN MY HAND NOW. SORRY TO EVERYONE WHO TRIES TALKING TO ME....I STILL CANT TALK TO ANYONE BECAUSE I TRIED CHANGING MY EMAIL ON HERE AND IT MESSED EVERYTHING UP. I CANT LIKE ANYTHING OR COMMENT ON ANYTHING. THE WORST IS I CANT JOIN CONTESTS STRIVE NUTRIENTS IS THE BEST IVE EVER USED. A MUST TRY AND I BUY IT MYSELF. GOT A SAMPLE LAST YEAR AND ITS SO GOOD I BOUGHT MORE. ITS A 2 PART POWDER NUTRIENT THAT DISSOLVES IN MINUTES AND YOU MIX THE SAME STRENGTH OF THE 2 PART NUTRIENTS FROM WEEK 2 UNTIL THEY ARE FINISHED (BESIDES THE FLUSH), NO MORE BULLSHIT OF SWITCHING TO BLOOM FERTILIZER. THATS MY FAVORITE THING BESIDES THE RESULTS. CHECK EM OUT AND BELIEVE EVERYTHING YOU READ BECAUSE ITS NO BULLSHIT, AWESOME FRIENDLY AND HONEST PEOPLE
Likes
14
Share
Week 3: Vegetative Growth and Care Welcome to the fourth weekly update of our cannabis cultivation journey in Germany! As we move into the third week of vegetative growth, our strains—Pulp Friction, Cookies Haze, Eleven Roses, Poddy Mouth, Critical Lemon Kush, and OG Kush—continue to thrive. This week, we’ve focused on maintaining optimal growing conditions and further refining our Low-Stress Training (LST) techniques. Key Developments: 1. Enhanced Vegetative Growth: - The plants are showing significant growth, with lush, green foliage and strong stems. - The 18-hour light and 6-hour dark cycle continues to support their healthy development. 2. Continued Low-Stress Training (LST): - We have adjusted the LST ties to guide the plants’ growth, ensuring an even canopy and maximizing light exposure. - The plants are responding well to LST, with multiple branches growing vigorously. Steps Taken: 1. Monitoring: - Maintained temperature around 24-28 degrees Celsius and humidity between 50-60 percent. - Kept the soil consistently moist, watering when the top inch of soil felt dry. 2. Nutrient Management: - Continued with a balanced nutrient solution to support vegetative growth. - Monitored the plants for any signs of nutrient deficiencies or excesses and adjusted the feeding schedule as needed. 3. Adjusting LST: - Gently repositioned the LST ties to ensure all parts of the plants receive adequate light. - Avoided over-stressing the plants by making gradual adjustments. 4. Pest and Disease Prevention: - Regularly inspected the plants for any signs of pests or diseases. - Maintained a clean growing environment to minimize risks. Next Steps: - Prepare for the transition to the flowering stage, which will begin soon. - Continue to monitor and adjust the environmental conditions and nutrient regimen to support healthy growth. - Keep an eye on the plants’ overall health and make any necessary adjustments to the LST setup. Stay tuned for next week’s update, where we’ll discuss the transition to the flowering stage and the care practices involved. Feel free to ask any questions or share your own experiences in the comments below!
Likes
2
Share
Likes
18
Share
Harvested at day 76, after 72h of darkness. Very good yield! 3.3 pounds of dry buds + 1 pound of trim The 2 keepers yielded 366 and 342g of premium quality smoke. Very uplifting and energizing high :) Love it!
Likes
15
Share
15/08/24 (FD 22): Started to give my girls some more bio bloom to boost Phosphate & flower development, for now they seem to handle the extra nutes with no problem what so ever! Also the stretch seems to be done and they reached 1m in height. I wonder how tall they would have gotten if I wouldn't have topped them in week 3? There is one really weird mutation in the big girls which results in a flat stem with a bend and stunted top...I am really curious to see flower development on this one! I hope they will reach their maturity in 6 weeks so I can harvest before October when it will get humid & rainy! Stay tuned
Processing
Likes
21
Share
So after the modification for the ac unit we are only able to get the temps as low 90 degrees while during the day while the lights are on. And it’s falls to about 75-85 once the sun is down. It’s just what it is. The blue dream auto is taking it like a champ I’m highly impressed. The master kush has started rooting now that temps are under control somewhat and doing better as well. I have started doing lst on the blue dream and femmed it as well. I believe it should be getting ready to hit flower if it’s not already in the early stages for it. Both plants are now getting the same nutrient feed which is one tsp per gallon of each part of the nutrients. I know now I mite have to go led lights for summer then run my mh/hps in the winter.
Processing
Likes
16
Share
@Dunk_Junk
Follow
She is at the far back. She is growing well this week, but she is not as big as her other three tentmates. She has the thinnest stem and she actually fell over for a couple of days before I got to her! 😕 I have now remedid the situation.
Likes
10
Share
@MG2009
Follow
09/11/2021 Plants are eating well bulking up, a gallon each plant of 9-0-1C Only got pics of #1 today tomorrow will post Sunday morning photos,videos Coffee, Reggae music, and plants.