The end of the fourth week. Only 2,5 to 3 weeks to go, since this is the FAST version of Gelato 33 by Advanced seeds. Last week temps were better, so that was a lot better to manage. The smell is a different story. We are trying to combat it as we speak with a double filter which my friend still had from a previous grow. The ladies are performing, however, because this is a monstercrop with many budsites, none of them will be very big. We anticipate a lot of cutting come harvest time. The stickieness and smell (cookies, dough, herbs, spices, gingerbread, vanilla) promise a lot to make up for that hopefully!! The middle plant that seemed to go fastest, now looks like to have the hardest time flowering. Her more advanced stage of flowering as a bigger clone, made it harder for her to return to veg, which she never really did. This seems to make her want to rush to the finish, as she is already browning the pistils. Also these buds seem more flakey, popcorny. As if the many flowers and grapelike bundled growth was too much for her. I put the light a little closer, to help her fatten up in the time she is given. I never expected the two 'runts' to outperform the mighty middle clone, but hey seem to fatten up and age much more nicely. So for now, prelimenary tip: make sure all your plants are completely revegged before flowering and consider that faster flowering species might have some ruderalis ancestry that might siderail all your lighting intentions and remains in flower what ever the growers lighting schedule. So with at least two more weeks for the two outer plants, and well see how many for the middle one, we are going to make them as comfortable as possible the final push of this flowering. Thank you for following and see you next week!!

Subimos la temperatura de la sala y vaya si se noto, las plantas crecieron más en 2 semanas que en un mes, una pena no haber podido aclimatar antes la sala

Week 14 (1-5 to 7-5) 1-5 Temperature: 28.2 degrees (lights on) 22 degrees (lights off) Humidity: 62% (highest) 46% (lowest) No pictures. 2-5 Temperature: 29.2 degrees (lights on) 20 degrees (lights off) Humidity: 61% (highest) 48% (lowest) Removed the net, and tied down some branches to the pot with some gardening wire. This way i can easily remove the pots out of the tent to weigh them. I also moved the oscilating fan from underneath the canopy to above the canopy. This is because the leaves gets hotter as i increase the light's power output. The Gorilla Kush #2 and the Chemdog #2 are showing some heat stress. Installed a valve on the autopot from the Kush #2. This is because its weight is higher then the other pots. Before i watered them i weigh the pots. Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 6.0 kg Added 10L to the reservoir. Opened the reservoir for a couple of minutes. 3-5 Temperature: 26.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) No pictures. Increased the light's power output to 75% LUX: 16.000 / 20.000 4-5 Temperature: 26.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 59% (highest) 41% (lowest) Opened the reservoir for a couple of minutes. 5-5 Temperature: 27.6 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 47% (lowest) No pictures. 6-5 Temperature: 27.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 60% (highest) 42% (lowest) Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 5.4 kg Added 10L to the reservoir, there was still 2850 ml left in the reservoir so now its almost 13L. Opened the reservoir for a couple of minutes. (Only Gorilla Kush #1) I also lowered the Gorilla Kush #2 a little bit, as she is showing some heat stress. The bud development of the #2 is very mediocre, some buds show some THC, and some buds have almost none on them. I am sure the yield will be low, so i will probably make some hash with the #2 7-5 Temperature: 27 degrees (lights on) 19.8 degrees (lights off) Humidity: 57% (highest) 44% (lowest

10/10/21 new week for CBD spliff berry Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

All three plants are happy and showing a nice layer of trichomes. Still in 2litre pots.

Im so fucking hyped on her and shes going Great... as the time im Wirting this im sure shrees already grown 1cm agian. Fucking hyped. Everything lookin nice !!!

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Plant double size in 1 week, and buds coming along 🦔🦔 Drink more and more water and look never enough 😅 💡 I up a bit the supply of lamp each days, now 50%, don't up much. 💪 I continued a bit the training, Removed some leaves. 💧 Give water each 2/3 day 1.25 l Water + Roots + Ez 1.5 l Water + Roots + Bloom + Sugar Royal 1.5 l Water + Roots + Bloom PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 49 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html

Start of 10th week and i decided to flush given almost 45L of clean water & been carefull with temperature of water! the laddies are looking well faded, and i hope to get a super clean medicine :) made some trim also on fan leaves to have better light penetration on lower canopy! Buds are looking dense, frosty & smelly!

Lowered the light a little, plant is growing slowly as before, roots are not going along the tube, just waiting until I can chop it. Values are average of the day. DATE - EC(us/cm) 20250507 1805 20250508 1788 20250509 1729 20250510 1746 20250511 1801 20250512 1864 20250513 1878 DATE - PH 20250507 6.13 20250508 6.11 20250509 6.15 20250510 6.16 20250511 6.17 20250512 6.19 20250513 6.18 DATE - ORP (mV) 20250507 291 20250508 299 20250509 286 20250510 267 20250511 258 20250512 239 20250513 229 DATE - °C - RH% (Tent Temp/RH) 20250507 23.2 46 20250508 24.3 40 20250509 24.7 44 20250510 24.2 39 20250511 25.3 38 20250512 26.4 37 20250513 25.8 31 DATE - °C (Reservoir) 20250507 19.2 20250508 19.1 20250509 19.9 20250510 19.7 20250511 20.3 20250512 21.1 20250513 20.4 DATE - CF 20250507 18.05 20250508 17.88 20250509 17.29 20250510 17.46 20250511 18.01 20250512 18.64 20250513 18.78

Ignition is amazing. The budsite development after just one week was incredible. First time I’ve used it and it is now a permanent addition. FIrst major de-leafing and lollipopping.

Paint does not dry, nor does water boil under a watchful eye. I got a new supplemental light. Mars 600. It was only $100. Number 1 continues to brown out the hairs. Nearly all done now. Trichomes are getting milky. I trimmed off a larfy bid this week and speed dried it. Was awesome. Taste was amazing even with the speed dry. Number 2 continues to put on a show. It looks like this plant was in a blizzard. So many trichomes, loaded, and continuing to put them on. No amber, but they are definitely getting whiter. On top of those purple leaves, she is dazzling, and smells like juicy fruit bubble gum. I tried a small bud of this as well, it was excellent. Super mutant looks like she is going through a deficiency..... Again.... How much nutrients can a plant drink before it would be considered toxic? Just kidding, I'm from the probation era and have smoked green oil mixed with motor oil. 😊 So, in lieu of the awesome taste on the bud, I'm not doing a flush like everyone says for a week. Canna nutrients are pretty mellow. I figure if I flush the last day, I'll be ok. The super mutant, I figure this plant is going to grow forever and will definitely need a good flushing.

The leaves are weird on some branches. Also have lits of gnats. How do I rid of them?

First official week of flower. Everything looking good. These need to be stripped again. Will do in two weeks

14/07 Auch in dieser Woche bekommt sie ein schönes LST. Die Triebe werden allmählich länger und die Blätter bekommen ein tiefes sattes Grün.

Another week closer.... Well its coming to an end pretty soon...the girls leaves are starting to fade and the buds are getting nice and tight...Frosty and smelling great. Nothing to report, not much happens the last few weeks its just you got to have patience, and let them ripen up... Until next week, smoke a fatty, help out your fellow grower.

Perfect tropical-like weather. No problems to report. Excellent growth. Still rearranging net tent as this bastard stretch a lot. Stigmas are finally forming. This strain surprises me more every day, she's the first to bloom when she should be the last, she should be unsuitable for outdoor cultivation and instead she's a great performing one. Excellent pheno. 😉👊

Trichomes have turned cloudy. Looks like about 2 weeks till harvest. Time to start the flushing process. One big flush monitoring TDS and nothing but ph’d water and a smidge of Mammoth P till the end.

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

I would like to express my gratitude to Plagron and Zamnesia for organizing this incredible contest, providing the community with the opportunity to participate, showcase their skills, and learn from one another for free. Initiatives like this strengthen the spirit of the community and highlight the talent of so many unknow dedicated growers. I am BelSun, a 34-year-old guy who started planting in 2018, mainly focusing on autoflowers,indoor setups and organic grow . Hope you enjoy my Journey on Eternity Grow Cup 2025 🏆💚 The main setup and a simple recipe on this journey as a thank you to Plagron and Zamnesia 👨🏻‍🌾 Runtz Automatic Zamnesia (3 seeds) Fabric Pot 3x15L RoyalRoom Classic C100 Electric Sky 180w v2 Plagron - Seeding & Cutting Soil Plagron - BatMix Soil Plagron - Perlite Plagron - MegaWorm Lurpe - Earth Vibes Super Soil Lurpe - Volcanic Ash Cultivers - Basalt Powder THC - Epson Salt THC - Delomite Vithal - Bokashi Mycoterra - Alfalfa Meal Canna-BioRHIZOTONIC Agrobactérias - Bactomatik Rex Plagron - Alga Bloom Plagron - GreenSensation *Plagron Schedule 100% Natural *Topdress amendments along the way if needed. *Light Schedule: 20h *Watering System: Manualy *Paper Towel MethodI I'm going to start in the middle of January, for now I still have some plants finishing flowering in the tent. Good luck for all! 💚 ------------------------------------------------------------------- #10/01/2025 I’ve prepared my Super Soil mix, and it’s now cooking until I start germination, which will be in about 3 weeks. ------------------------------------------------------------------- #03/02/2025 For germination, I leave the seeds in a bottle of water for 12 hours, then transfer them to a paper towel until they sprout a root. This method has worked well for me! ------------------------------------------------------------------- 04/02/2025 I’ve transferred the seeds to the paper towel method! Now it's time to Pot preparation! For my pots, I use a three-layer method, filling each layer while shaping them with different-sized pots: - First layer: Super Soil - Second layer: Regular fertilized soil (BatMix by Plagron in this case) - Third layer: A light soil with mycorrhizae (Seeding Soil by Plagron) ------------------------------------------------------------------- #05/02/2025 I’ve planted the seeds! I'm using a cheap LED light from Amazon just to kickstart germination and gain a few extra days to finish flowering the plants in my tent. As soon as they sprout, I'll transfer them to the tent, where my old but fantastic Electric Sky 180W is waiting for them! ------------------------------------------------------------------- #08/02/2025 Two of them have already germinated, but one still hasn’t. I’m struggling with low temperatures, as it's been only 12°C during the day and between 3°C and 7°C at night. Unfortunately, I had a bit of bad luck—my lamp fell onto the pot, disturbing the soil and seeds of two plants. One of them is the one that hasn’t germinated yet. Just in case, I’ve put two more seeds in the paper towel method as backups. If I don’t need them, I’ll give them to a friend! 🙂 ------------------------------------------------------------------- #10/02/2025 I placed them in the tent on the 10th. Two of them germinated on the 8th, while the other was affected by the lamp falling. I’ll probably replace it with one of my backup seeds and offer #R03 to a friend, but it all depends on how things go in the next few days. ------------------------------------------------------------------- #12/02/25 I replaced the seed that went into shock with one of my backups. So, from now on, #R03 will be the backup seed, and it will be about a week behind the others. --------------------------------------------------------------------- #13/02/2025 The backup seed has sprouted! 🌱 ---------------------------------------------------------------------