The Grow Awards 2026 🏆
Likes
Comments
Share
@RobsterOR
Follow
Well, after majorly fucking up the princesses (but hoping one still survived) next in line are 2 North Thunderfuck. I named them Ei and Makoto (iykyk ^^) D1: this time we go the direct-to-pot route. Fuck plugs, fuck everything, we are raising two little fuckers! Hopefully with a better start this time... I swear Ill be patient.... I swear XD Like planned they will spend some time in the kiddie tent with their new light, and then take it over to the grown up tent once there is room over there. Lets go! D3: zzzzz ^^ D4: We have 2 healthy babies! Needed to help Makoto a little shed to her skin (veeeeery carefully with a toothpick). Welcome, girls! Can't wait to see your journey! They will be accompanied by a timelapse video, hope this time it looks better and is without stripes XD
Likes
8
Share
@Alien98
Follow
In the last days the buds of this girls are getting bigger and heavier day to day. It's my first grow so I'm very excited to see how they grow up, I love the smell of orange/lime and how many tricomes they have.
Likes
141
Share
💩Holy Crap Growmies We Are Back💩 Well growmies we are at 21 days in and everything is going great 👌 👉 Shes a short chunky little plant 👈 We got some very pretty colors😍 👌 She's got tight branching and super bushy too 👍 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Processing
Likes
4
Share
I'm starting to feel like a broken record but week 11 was another easy week finishing out the week with soil ph right at 6..8 and she is just getting fatter and fatter by the day. now day 2 into week 12 with another 2 weeks to go before I chop her.. cant wait to see the final product
Likes
14
Share
ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
44
Share
24 Oct 2021 Week 16 began yesterday, but the first watering of the week was today. I’m keeping up with the flush, starting the 2nd week today. Hopefully I’ll be able to harvest in a few days. My Trio is looking really lovely. Their buds are covered in trichomes that glisten under the lights. They are starting to darken in color in some areas like their mother did. They may take on some pinkish/purple hues before it’s all done. Some of their leaves are turning purple as well. The sugar leaves are somewhat dark, but still green. All three of them are very nice to look at, and their smell is super strong! It’s really nice in my grow room! Yesterday I went out and got some more of those support sticks from the local home store and provided support for all of the branches that needed it. Which was a lot! I got 7 new support sticks and used them all. All of the branches are now supported and flourishing! Today each of my girls received a gallon of properly pH’ed water, and each had a sufficient amount of runoff from which to gather measurements. The process went as follows: C1 & C2 had an initial pH of 6.9, and C3’s initial pH was 6.8. I added .2ml of pH DOWN to each gallon which adjusted the pH to 6.4 for C1, and 6.3 for C2 and C3. TDS going in was 88 ppm for C1, 86 ppm for C2, and 84 ppm for C3. Runoff measurements were a little weird. The runoff pH for C1 was 5.9. The TDS was (at first) 600 ppm. I thought that was an incredible drop from the other day, so I did it again. It was 603 ppm the second time. Ok, moving along nicely! The runoff for C2 was pH - 5.8, and TDS was 1101 ppm. 😳 That’s a lot more than C1. C3 had a pH of 5.6, and TDS of 1212 ppm. Which is even more; so I measured a little more from C1 again, and the 3rd time it measured 736 ppm. 🤔 That seems weird to me, but I’ll keep an eye on it. If it continues to be that low then I will end up harvesting it before the others which won’t be so terrible. I’ll just have to wait and see. The temperature in the tent was 81F, and humidity was 47%. My ladies are looking lovely and growing better than I could have hoped for. This grow has been awesome, but I can’t wait to be done. Happy growing everyone! 27 Oct 2021 Feeding/flushing time again! I was somewhat perplexed the other day when I got the runoff reading for the TDS in C1. It was 500-600 ppm less than C2 & C3 respectively. Since I was having some issues with the TDS meter I thought that IT may be the cause. I made a note to check on it today, and there seems to be no problem with the TDS meter at all. Keep reading for details. My plants are still looking as lovely as I could ever have hoped for! C1 has started showing more color changes than the other 2, and the only thing I can say the difference is, is that I defoliated some of C1’s larger fan leaves last week, and wasn’t able to do the same for the other 2. That is the ONLY thing I can think of that has been different between all 3 plants this entire grow. Regardless, all 3 plants are looking wonderful! Today each of my lovely ladies received a gallon of property pH’ed water with an expected amount of runoff for testing. The preparation went as follows: C1 & C2 had an initial pH of 6.9, and C3 was at 7.0. I added 0.2ml’s of pH DOWN to each gallon which adjusted the pH of all 3 gallons to 6.3. TDS going in for C1 & C2 was 85 ppm, and C3 was 84 ppm. Runoff levels were different for all three plants. C2’s runoff pH was 5.7, and TDS was 1041 ppm. C3’s pH was 5.6, and TDS was 1059 ppm. Last time C1 was significantly lower than the others, and I thought that maybe it was a TDS meter issue. Evidently it wasn’t. C1’s TDS today was 526 ppm! 😳 still much lower than the others, and pretty much ready for harvest. The temperature in the tent was 81F, and humidity was 43%. Although harvest time is much closer, I don’t believe it will be done in time for this month’s grow diary of the month contest. So sad, but that’s life. Happy growing everyone! See you again soon. 29 Oct 2021 Today is the last day of week 16. I was planning on continuing the flush today, but remembered something that I had forgotten about…. I remembered the branch that had broken off of C1 back on October 10th in week 14. She had held on for well over a week in a can of water, but finally her leaves started to droop. I hung it up all by itself in my small tent to dry. Until today that is! I took it outside and trimmed it on my deck. Even outside, in a pleasant breeze, the amazing smell of this branch was easily detected. It’s kind of windy, rainy, and chilly here today, but still …. That sweet blueberry muffin smell was there. Her buds; still covered in the dried, crystallized trichomes were super sticky! I must admit that they are the stickiest buds I have grown to date. I weighed the dry bud to add to the grand total of C1’s harvest later. Then I ground it up and smoked it. All I am going to say is that from my reaction to smoking it; I have decided that no additional flushing is needed. After all, what I smoked today broke right before I started flushing, and I could taste nothing other than what I would hope to taste. So my fellow Growmies; I am ending this week right here. The next report you will see will be the harvest report!! Stay tuned!
Likes
Comments
Share
@Chamed33
Follow
We at week 5 Flower and the buds are still pushing !! From week 1 to now I did not encounter any issues on the plant
Likes
29
Share
2/8 Preflowers appeared on the GG and BC. The only one not on the Preflowers train is the GSC but she is 10 days behind the others. Branches on all plants are solid and sturdy, humidity has been an issue and I am working on it. 2/9 raised lights another inch and GSC now has Preflowers 2/10 TB and BC must of took their roids last night cause each grew 3.5 to 4" over night. More Preflowers and budding sites appearing on all plantd. Stretch is coming the stretch is coming. Raise lights 4" and lifted up GG 2 inches. All plants avg 40k on lux meter. Rotating plants everyday now. 2/13 everybody is exploding upwards. I was focusing a lot of time on my other grow and I am pretty sure I missed my LST window with these ladies. My 4x4 tent is filling up rapidly. Had to raise my lights up another 3 inches with distance ranging from 12 to 18" from all tops. Just going to take group shots until pistols start appearing. Probably going to switch over to HPS over the weekend
Likes
3
Share
@lalee
Follow
amnesia autoflower is the best strain. I and my friends love this strain. amnesia plant was very strong and beautiful and got much THC and have less smell. I think amnesia is best for indoors and I love amnesia
Likes
23
Share
@Kynareth
Follow
week 11- this is the last week until harvest- i have made root cleaning and the leaves are now more yellow due to it. ill harvest probably tomorrow so lets see the final result
Likes
13
Share
Test Mr Hide seeds / LM301B Bestva Quantum Board Estas Marías automáticas se han hecho enormes, tienen en promedio 1 metro de altura y a mi parecer no es porque se hayan estirado por falta de nutriente en la etapa vegetativa (me encantaría saber su opinión sobre esto al verlas). Aumenté la potencia del ventilador para que tengan más movimiento y potenciar el fortalecimiento de las ramas. El hecho que se hayan hecho tan altas, me hace pensar que con las flores pueda llegar a necesitar estar más robustas en las bases. Se ha utilizado agua llovida, que leyendo un poco indican que no tiene mayor beneficio si se almacena para utilizarla posteriormente (se convierte en agua dulce común), sin embargo he seguido utilizando. Les agradezco sus observaciones para logra identificar así los errores que cometo. Buenos humos y buenas vibras
Likes
3
Share
@DrBud420
Follow
23.05. today is the end of the fourth week for the plants, they haven't progressed much since last week, they grew a few cm and gained a little weight, but they are healthy, which is the most important thing... in a few days I will transplant them and top them because some of them have already developed the sixth pair of leaves, so I simply have to top them. turned out... I thought of transplanting them into 10-liter pots and after two to three weeks into 50-liter holes, however, the weather didn't cooperate, and I was already late anyway because of the bad weather, and because of the same, my plants in the fourth week were the same as they should have been in the second, and because of the same, I couldn't even transplant earlier... now that nothing went according to the "plan", of course, I don't know how smart it is to transplant them into 10 L and then into 50 with the fact that it is with me the longest day of the year is June 22, so that actually a week after that it can start flowering (it usually starts at the end of July or at the end of August, but it can be late and start even in September, and it also knows how to plow and start already at the end of June)...now I think that it is better to buy smart pots of 50-60 liters and immediately transplant into them and then just bury them...another problem with that is that the soil that I took for vegetation has food in it for a month days, if I transplant twice, it may happen that it enters flowering, and the food for the vegetation has not yet been used up, and that would be a problem...advices are welcome Stay high!!!
Likes
3
Share
@Xabii
Follow
DISCLAIMER START EC Value on weekly page is the actual value, my EC meter was not calibrated and gave extremely false values, that's why it went so bad, corrected it on the weekly page when I noticed it, the EC value in the comment is wrong, the rest is correct. DISCLAIMER END The plant keeps growing super slow and doesn't like "high" EC, after the Increase in EC last week it got stunted and a couple days later started to show tip burn. Really really frustrated and if this one was in my usual setup I would have tossed it out of the window. New growth after topping is also growing EXTREMELY slow. Did some defoliation to get light to lower nodes but ya whatever the plant doesn't care and doesn't want to grow. Unsure if it is due to this pheno, the new setup, the new light or whatever, to many variables to definitely say. I see this grow as a big experiment from now on and don't expect anything anymore. Added some Universol Yellow (high P) after lowering EC due to tip burn. Changed the light to my old one the SP3000 to see if the higher amount of far red is helping it to stretch. Plant started to flower properly mid week so I'll start to mark it as flowering starting next week. On one leaf there is a bud starting to form. Values are average of the day. DATE - EC(us/cm) 20250315 1696 20250316 1630 20250317 1433 20250318 1406 20250319 1398 20250320 1323 20250321 1350 DATE - PH 20250315 6.09 20250316 5.94 20250317 5.58 20250318 5.67 20250319 5.68 20250320 5.71 20250321 5.70 DATE - ORP (mV) 20250315 49 20250316 40 20250317 80 20250318 63 20250319 51 20250320 30 20250321 45 DATE - °C - RH% (Tent Temp/RH) 20250315 23.8 43 20250316 23.2 37 20250317 23.2 43 20250318 22.9 43 20250319 22.7 53 20250320 22.8 48 20250321 23.2 44 DATE - °C (Reservoir) 20250315 20.9 20250316 21.1 20250317 19.4 20250318 18.6 20250319 18.9 20250320 19.2 20250321 19.0 DATE - CF 20250315 16.96 20250316 16.30 20250317 14.33 20250318 14.06 20250319 13.98 20250320 13.23 20250321 13.50
Likes
23
Share
@cadur
Follow
Days to go, amber trichomes starting to show, maybe 5-10%. Have been on tap water for the last week.
Processing
Likes
2
Share
@MephodMan
Follow
Topped to 4th node. Started brewing ~5l of neem/kelp/aloe Trying out LST clips for the first time. Added a couple of small LST clips on the 4 largest fan leaves. One of the large lower fan leaves snapped off this morning when I was adjusting the LST clips. It looked like it had already snapped yesterday. Adjusted VPD to lower humidity
Likes
56
Share
La planta viene bien, salvo que los brotes del medio tienen un color distinto a los de las 4 puntas principales, pero muy linda planta sin deficiencia ni excesos por el momento, resinando mucho y formando los cogollos, 08/05 se riega con 3 litros de agua (50% de osmosis + 50% del grifo) + 2 ml de cal mag + 1 gramo/L de bioenhancer de green house feeding. PH: 6.3 EC:1.0 11/05 se riega con 3 litros de agua (2,5 litros de osmosis + 0,5 L del grifo) + 2,5 ml de cal mag, PH: 6.4 EC: 0.7. se hace una medición de escorrentía y salió con EC:1.8 PH: 6.3. Luego del riego se aplico en el sustrato 0,5 Litros de agua + 1.5ml de BioNeem + 1,5 ml de bioprotect ambos productos de namaste nutrientes para combatir los pulgones de raiz. Proximo riego con enzimas. 14/05 se riega con 3 litros de agua (50 osmosis 50 grifo) más 1,6 ml x L de zym de treemix pro + 2 ml x L de top bloom de top crop. PH: 6.4 EC: 1.5
Likes
7
Share
@RunWithIt
Follow
Alright, loving her progress! Her vigorous growth keeps me on my toes each day, defoliating and topping her constantly! After this set of topping I'm going to chill on that and try just defoliating from here on out. She sits at 8 tops currently and I want to get her to 16. I transplanted her into a small nursery pot, on another note. Fed her mykos and XSD and I swear she didn't even take any recovery time. Just chugged on through. I did make a mistake when topping, wound up as more of a fim, cut the entire top completely off, so it looks like I'll have 15 tops instead of 16. Oh well, mistakes were made. Still extremely excited to mother this girl. Should be ready for clones within the next month. I should also mention I'm going to try and keep her really low and wide. So that I can non-invasively pluck clones and then have a nice frame to chuck into flower once I'm done 😜. Cheers all, stay safe and stoned 😷👌
Likes
33
Share
A couple of days ago I got home and a sublime smell of coffee pervaded the area. Smell it smells you I came to understand what was good when I started the flush of our wonderful Auto test #1. The colors have come out forcefully both in the hair and the leaves have taken on a fantastic color, the maturation at the top is practically finished at the bottom something is missing, the plant still drinks a lot and we are flushing as if there were no tomorrow. We don't know what this beauty is GHSC mouths are rightly kitchens because it will be out very soon we are sure of one thing, a smell of coffee that makes me tear my underwear, wonderful. Auto test #2 is a week late but because I planted her quite later, she has now started to apply color but she has been throwing resin everywhere for a while, she too will be scary. There is a lot of good seed bank but only one is of the King. https://greenhouseseeds.nl/ Love this Farm! https://www.mars-hydro.com/