This is the sister diary of the Runtz showdown, in which we pit two great performing strains created by two highly acclaimed and respected breeders, in a duel to the death. This diary features the RUNTZ XL AUTO strain by SweetSeeds. In the meantime, all seeds have germinated and seemed to have a level start. Also here we loaded the grow with our magical intentions as we sowed on Imbolc, the celebration day of the Goddess of spring: Bridget. We cant wait to see where this will lead us. Both strains will have the exact same conditions, lighting, care and nutrition. The Lights Also here we use our trusty Mars Hydro SP-3000, where we are trying to get over 600 grams (2x gram per watt) we succeeded almost on the previous grow, where we got to 1.5 grams per watt. We are starting in the regulars when these strains have only 4 to 5 weeks left to go, to double up on the 18hr light schedule. The Soil Our trusty organic super soil recipe which I will include in the images The Genetics SweetSeeds Runtz XL Variety: SWS88 Indica: 47,1% Sativa: 52,5% Ruderalis: 0,4% THC: 17-25% CBD: 0,5% Indoor Yield: 400-550 g/m² Outdoor Yield: 50-175 g/plant Indoor/Outdoor Harvest: 8 weeks from germination Height: 60-120 cm Effects: Relaxing, Stimulating, Creativity Taste: Sweet, Fruity Thank you for following us again and all the support on our previous grows! We love you! Hug Biobuds and Sunshine.

Day 84. Girl is down !!!! Love FB and it's easy to understand why ;)) I started my run at same time as this one,think Mars super light had influence for girls finishing in such nice colours and short time. Thank You very much for both companies, amazing products !!! Huge respect @MarsHydro @FastBuds Happy Growing !!!

Estamos en la tercera semana de crecimiento vegetativo. Nuestras plantas ya tienen unos 15 centímetros aproximadamente, y han superado la fase crítica. Recordamos que hasta ahora solo estamos regando con agua, aún no hemos incorporado los fertilizantes. Seguimos manteniendo la humedad relativa bastante alta, y la temperatura entre 22 y 24ºC. Pero aumentamos la potencia al 50% de ambas luminarias.

Week 7 (10.2.25-10.9.25) took photos on 10.4.25

Very fast flowering period!!! 56days

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

She is developing nicely, haven’t really been doing much to her, other than tucking some leaves away. Comparing her to her mothers diary, she is pretty much on par in terms of flower development, maybe even slightly ahead, as I decreased the light distance much earlier.

Early week 6 update (i'll add more pictures and comments as needed): Unfortunately I hit some challenges! Light got way too close and stunted growth for a day. I noticed it on tips closest to the light only. Raised lamp to 22 inches. Indica bagseed (plant in the center front) got too stacked: stuff like leaves on top of each other with lots of moisture, no light/airflow penetration, etc. I did some basic LST, leaf tucking, net tucking, to open her up and go sideways more a bit at first. It helped a bit. Unfortunately aug 27, had to get more aggressive on this beast and remove 3 shade leaves on the right side. not happy about defoliating, but had to do it. Will see how she takes it and then look at left side on a later day. Growing the first time is educational and actually therapeutic in today's world for me. I've already learned so many lessons for the net time: don't need such a yuge pot, lamp brightness/distance, air circulation!!! Thank you to everyone that responds with positive encouragement/messaging, it really helps. Adding two more fans to help air circulation aug 28. hopefully it reduces the need to desecrate the plants! Meanwhile the plants in back (purple canyon) want to stretch their faces off, esp. the one in back left, so it is a balance. I only have so much vertical height :) aug 29, flipped to 12/12. plants are happy and i want to control the space for first grow. let's see how it goes. updated the humidity for the week to ~ 60. Ida etc has made it miserable, it should get better soon.

⏳🌳The Endless GREEN Garden🌳⏳ ____________________________________________________________________________________________ 🌳 4.3 ... 🌳 5.3 new photos, last 2/3 weeks and we will greet these dos si dos 33 together. yeah 🌳 6.3 🌳 7.3 🌳 8.3 🌳 9.3 🌳 10.3 ____________________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 ✌️Dos-si-Dos 33✌️ 🌞🚜 Barney's Farm 🚜🌞 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 60% Indica / 40% Sativa 🎄 Genetics ▪️ Dos Si Dos x Gelato #33 🚜Harvest ▪️ 800 g/m² 🌷Flowering ▪️ 60 - 65 days ✨THC ▪️28.0% ✅CBD ▪️ N/D 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2019 ________________________________________________________________________________ 👀📷🥇 Follow the best photos on instagram 🥇📷👀 https://www.instagram.com/dreamit420/ 🔻🔻🔻Leave a comment with your opinions if you pass by here🔻🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

Time lapse

May 26; entering week 4 so things will start happening soon. First few weeks it always looks like nothing is happening. Cool overnight temperatures also keep the growth a bit slow, but the weather is good and I’m sure there will be a big growth spurt very soon. Did weekly foliar spray of Extreme Blend from Kelp4less.com May 30: small watering with some Natures Source and molasses. Pretty warm at 27 C and Thunderstorm came at 9 pm. Plants had their hats on for protection. Nice rain with some serious thunder. ⛈️⛈️ May 31: another warm day with an evening thunderstorm. Plants protected. June 1: they got rained on today.

This is the home stretch!! Buds had their final little burst in size and all the trichomes are nice and cloudy, so for me, it’s time to harvest. I’m doing one more flush with ice water and putting her in total darkness for 48 hours. Gonna chop her in a few days once the soil has dried out and just take off some big fans leaves and hang her up to dry for a few days!

This is been a pleasure to watch flower and grow. In the earlier seedling stage she was a bit delicate and there was a little cupping to the leaves but that ironed out later on. She started showing flowers or a pre-sex real early but then just started filling out Calyx on top of calyx. Flower flower flower. This was a strain that I wanted to grow as long as possible we’re gonna be going into week 13 so I decided to cut her down branch by branch. I’m going to be doing a cold drying process that I’ve been experimenting with. It’s where I will place it in a cool and preferably low humidity area. I have a cooler that has a small heater air conditioner installed into it. I will keep the flowers that are drying half the time in the cooler and half of the time at room temperature so that way we retain maximum Terps.

All good this week too. The strawberry lemonade turning purple!:)) gg#4 it’s a hermy… the other plants are good! White widow xxl it’s the first to harvest…In 3 weeks…. Fxxk

Another week has flown by! The girls are doing great, cruise control this week as I have just been monitoring RH and temps. Trying to keep them as low as possible, I’ve been getting as low as 74 during the day and 68 at night. I finally took a look a look at the trichomes with my jewellers loop, lots of cloudy, and a few amber around the leaves and top colas, but still lot’s of clear trichomes. I’ve ordered myself a wireless/usb digital microscope to assist with the process, and looks like it will be here just in time to determine harvest day. 😎🎄 I started by eliminating the nutrients at the beginning of the week. I typically allow for 3-4 pure water feeds before I harvest, and at the rate they have been drinking, this should be enough to get through the 7-12 days they have before harvest. I don’t flush, but rather “rinse” with normal water amounts, allowing the plant to use up the remaining nutrients in the soil. This also allows me to recover most of the soil from my grows and reuse ♻️ with other soil mix. There has been great debate and a great deal of bro science out there for many years, but the recent studies suggest there is no difference in end result when it comes to flushing or using nutrients right until the end, if a proper dry and cure is performed. What do you think? What do you prefer to do? Thanks for reading this far, leave me a comment with your preferred method 👊🇨🇦❤️

The most difficult strain to grow this cycle, I do not know whether it’s due to the irrigation of the pot she resides in, causes this slow growth, and making matters worse nearly fried her with nutrients, so I flush but it turned out I was overwatering with the flushing, so I have allow it dry up a bit and incrementally flush due to the slow drainage from this pot, though she revegged I will not add nutrients, since she’s this far in her flowering phase, I don’t want to risk not having enough time to flush before harvest.