They surprised me today with the stretch they pulled out the net, hopefully got everything in its place and flowering happily, the 3 haze berries are growing into huge colas and the bblaze its blooming.

Was a nice grow thanks to the autopot system I saved my ass a lot of time with watering that hungry girl.

Nothing new

Beast 😅 hundreds of tops 😅😅

WEEK 5 SETUP - ROOT ZONES Optimizing cannabis performance requires balancing a strict temperature gradient between a cool root zone (68°F–72°F) to maximize dissolved oxygen and active nutrient transport, and a warm canopy (77°F–95°F) to accelerate photosynthetic enzyme activity and electron transport rates. There is a critical anatomical temperature gradient required for optimal cannabis metabolism: The Root Zone (68°F–72°F): Must be kept cool to maximize dissolved oxygen, preventing root rot (Pythium) and ensuring active transport ATP powers root elongation. The Metabolic Sweet Spot (77°F–95°F): The primary Electron Transport Chain (ETC) enzymes and ATP synthase complexes in the foliage require these warmer temperatures to maximize molecular collisions, accelerating respiration and carbon fixation. The Destruction Threshold (104°F): Enzymes and lipid membranes denature, causing structural metabolic collapse. Active transpiration constantly pulls dissolved O2 down through the top of the substrate like a piston. At night, the top-down pump completely stops. When transpiration shuts down after dark, the root zone can quickly become stagnant and oxygen-depleted because the mechanical "pump" is off, while the roots still need to breathe. Having a hole in the middle of the 100 gallon, in which all the air intake in an indoor grow tent comes up through the middle of the pot rather than open side panels, and having tent exhaust connected to RH allows cellular respiration to enact the exhaust, which creates a negative pressure differential that will act as a pump at night similar to daytime, but with a different mechanism. By routing your intake exclusively through a central hole in the pot and linking the exhaust to a Relative Humidity (RH) controller, you are effectively replacing the daytime transpiration-driven pull with a nighttime vapor-driven physical pull. Because the side intake vents are sealed, the tent is forced to draw its replacement air directly up through the center of your massive pot. This actively pulls stagnant, CO2-heavy air out of the root zone and replaces it with fresh, oxygenated room air. UVC 264nm duct sealed with HEPA filters to prevent contamination of pathogens. Constant airflow of 0.2m/s underside of the elevated pot to prevent potential runoff stagnation. Polystyrene insulation to prevent core desiccation, HVAC climate-matched intake, inline UVC/HEPA filtration, and constant underside air velocity are successfully engineered around every major failure point. Because cellular respiration spikes RH in waves, ensure your exhaust controller has a tight deadband (e.g., +/- 2-4% RH). This prevents the fan from "hunting" (short-cycling on and off too rapidly), which would cause erratic pressure shifts in the root zone. Using large-sized Hydroton (expanded clay) pebbles fill a 12-to-14-inch diameter middle cavity in the pot solves the air channeling problem entirely. By replacing a dense substrate core with a highly porous, structural aggregate, it creates a dedicated internal air plenum. This ensures that the negative pressure differential acts uniformly across the entire vertical column of the root zone. Often referred to as a sub-surface aeration plenum or negative-pressure root system. By using negative pressure to pull or push conditioned air through a Hydroton (expanded clay pebble) plenum, this setup optimizes the root zone microclimate while preventing the typical gas stratification found in traditional containers. The 12-to-14-inch Hydroton layer acts as a high-porosity distribution vault. Because Hydroton has massive interstitial spacing, air can move through it with minimal resistance before diffusing into the denser substrate above. Instead of air channeling up a single path, the system forces the conditioned air to spread outward and upward evenly across the entire radius of the root mass. Roots actively consume Oxygen and respire Carbon Dioxide (CO₂). In standard pots, heavy CO₂ and excess Nitrogen can settle at the bottom, creating an anaerobic "dead zone." This negative pressure actively pulls those heavy gases out, replacing them with oxygen-rich, HVAC-conditioned air. Roots that penetrate the polystyrene/mesh barrier into the Hydroton core will experience incredible growth due to the hyper-oxygenated environment. However, because of the high nighttime airflow, the surfaces of the Hydroton will dry rapidly after irrigation. This will create a localized, self-regulating air-pruning zone, forcing the plant to explode with dense, lateral feeder-root branching just outside the core. Turns one's massive pot into a bi-directional, lung-like matrix. Equipped to destroy all limits set before it with nearly zero points of failure. With these safeguards implemented, the root zone environment achieves an unprecedented level of equilibrium. The plant drives the system. High transpiration creates a powerful top-down pull, dragging oxygenated moisture through the upper profile. The HVAC and HEPA/UVC intake runs passively or under low static pressure to maintain ideal ambient baselines. Transpiration ceases(Photosynthesis), and metabolic cellular respiration triggers a spike in relative humidity. The RH controller instantly fires the exhaust fan. The negative pressure vacuum instantly engages the clean, conditioned cohesive air column. Fresh air sweeps through the sealed duct on the underside of the buffer zone(pot), enters the 12-to-14-inch Hydroton plenum, and diffuses radially outward through the HVAC-controlled substrate. Stagnant CO₂ and nitrogen are actively evacuated. This setup prevents root rot, boosts oxygen levels at the root zone, and accelerates plant growth by ensuring the root system always breathes fresh air. Polystyrene keeps the core from drying out prematurely, the physical barrier keeps the media from migrating into the plenum, and the climate-controlled intake ensures the root zone never drops below its metabolic sweet spot. In standard growing systems, a root zone of this massive scale always runs into a diminishing return curve: the larger the pot, the easier it is to create cold, stagnant, anaerobic dead zones in the deep interior. This design completely smashes that ceiling. By turning the absolute center of the mass into the cleanest, highest-flowing, most oxygen-rich zone in the entire garden, it allows the root system to expand exponentially without ever hitting a wall. One is giving the plant the ultimate foundation to maximize its genetic potential, pushing growth rates, nutrient uptake, and overall vitality to their absolute limits. Also allows intake while catching all CO2 generation in the bottom half of the tent, kicking it up into the canopy every morning, even all around with 360 distribution, zero dead spots. Sub-surface aeration and magneto-electroculture matrix: a highly sophisticated, closed-loop engineering framework that perfectly bridges plant physiology with fluid dynamics and electromagnetic physics. By turning a traditional container into a bi-directional pneumatic lung, the design successfully bypasses the biological stagnation limits of massive root zones while leveraging micro-Lorentz forces to enhance nutrient mobility. Integrating a massive copper rod with an iron core (an electromagnet core) directly down the central axis of the Hydroton plenum—and driving a magnetoelectric field at the base using a neodymium magnet—shifts setup from a basic galvanic circuit to a specialized magneto-electroculture matrix. Running the earth battery's DC current through a highly conductive copper casing insulated around a ferromagnetic iron core transforms the central air column into an inductive broadcast tower for the rhizosphere. Just big enough to fill the massive root zones but not enough to leave the 4x4 tent. The physics and structural safety of this addition alter the system's dynamics in a couple of ways. Copper is an excellent electrical conductor but is non-magnetic. By wrapping the high-permeability iron core inside that copper column, you focus and amplify any magnetic flux lines generated by the circulating micro-currents. ⚠️ Extreme Handling Hazards ⚠️ 38 mm OD x 19 mm ID x 6 mm N52. ⚠️ Extreme Handling Hazards ⚠️ ⚠️Keep it well away from pacemakers, credit cards, mechanical watches, and sensitive magnetic sensors.⚠️ There is a permanent neodymium magnet at the base of this core, inducing an electrical current; this creates a localized electromagnetic actuator. Because it sits at the bottom of the plenum (where HEPA/UVC filtered intake air enters), the air moving up the column passes through a dense, structured magnetic gradient. As HVAC-conditioned water droplets and dissolved nutrient ions flow outward from the Hydroton plenum into the biochar, they cut perpendicularly through this magnetic field. This exerts a micro-Lorentz force on the free ions, altering their kinetic trajectories and potentially boosting ion mobility through the substrate's high-impedance boundaries. The central rod is sealed in a non-conductive jacket below the soil to allow the magnetic field to pass through while physically isolating the raw metal from moisture. Iron cores radically increase magnetic field strength, but they also introduce electrical resistance. If the current from the earth battery hits a bottleneck in the central rod, that energy transforms into heat. Given the root zone has a strict oxygen threshold above 75°F, use a digital multimeter to verify the central rod is not acting as a heating element. Copper is highly toxic to plant roots in elevated atomic concentrations. Because the central plenum experiences a massive, nightly rush of high-humidity air driven by the pneumatic exhaust lung, an unsealed copper rod will oxidize rapidly. This creates copper carbonate or copper sulfate runoff that will toxicify the hydroton pruning zone. Luckily, we don't top water in that zone. Roots exhibit magnetotropism (growth responses to magnetic alignment). A constant, hyper-intense magnetic field can distort root elongation or cause root tips to prematurely deviate from their lateral path toward the biochar. Ensure input voltage stays strictly in the micro-current range to keep the magnetic flux lines subtle and non-disruptive. The permanent magnetic field has a profound, measurable effect on the surrounding rhizosphere. Placed right in the middle of the massive 100-gallon pot, the 38 mm neodymium magnet acts as a powerful bio-magnetic anchor. Because the magnet is completely sealed and safe from corrosion, its magnetic lines of force will constantly radiate into the soil matrix. In plant biology and soil science, this triggers several notable physical and biological shifts. Water molecules are diamagnetic (weakly repelled by magnetic fields). When water moves through the soil near the magnet—whether from watering or root suction—the strong permanent magnetic field temporarily loosens the hydrogen bonds between water clusters. It breaks larger water groupings into smaller, highly uniform clusters. This "magnetized water" moves through soil capillaries more fluidly, lowering surface tension and allowing the roots and surrounding microbes to absorb moisture and dissolved ions much more efficiently. The field stimulates soil enzymes like phosphatase, which unlocks bound phosphorus in the soil and turns it into a bioavailable form for the plant. Many beneficial Plant Growth-Promoting Rhizobacteria (PGPR), including nitrogen-fixing strains, are magnetically sensitive and show increased activity and modular clustering under a magnetic field. The field strengthens the communication networks among soil microbes, which actively boosts the plant's natural tolerance to environmental stressors like salt or drought. Roots exhibit a subtle trait known as magnetotropism. Plant cells use internal electrical gradients to guide growth and transport nutrients. The permanent magnetic field alters the transport kinetics across cell membranes, influencing auxin (growth hormone) distribution. As roots grow into the middle zone of the 100-gallon pot, they will likely develop denser branch networks and thicker root hairs to maximize surface area contact. Magnetic field strength drops off drastically with distance. A 38 mm neodymium magnet exerts a massive effect on the soil within a 10–20 cm (4–8 inch) radius around it. In the 100-gallon pot, it will not drastically affect the outer edges of the soil, making it a perfectly sized "core zone". The roots must grow relatively close to the center to interact with the high-flux zone of the field. Once they do, 432. Explosion. Those faint, clean yellow tips with zero browning, crispiness, or structural curling are not a sign of disease; they are a system-level operational signal from a plant running at maximum physical capacity. The system uses a 1.34 kPa leaf VPD, an N52 bio-magnetic anchor, and an active earth battery; the plant's water and mineral translocation is running at an incredibly high velocity. When a cannabis plant experiences zero osmotic shock but displays clean yellow margins at the extreme tips, it points to one of two high-performance phenomena: 1. The Terminal Mineral Lag (The Gilded Edge). Aggressive transpiration stream is pulling mobile nutrients (like Nitrogen and Potassium) up the vascular xylem effortlessly. However, calcium, boron, and certain trace elements are heavy, slow-moving, and immobile. Because the Electron Transport Rate (ETR) is firing so fast under the multi-fixture matrix, the leaf cells are multiplying and expanding at an exponential rate. The faint yellow tips represent the absolute furthest point from the root zone—the terminal ends of the leaf template. The slow-moving, structural minerals are experiencing a minor distribution lag trying to reach the very end of the leaf grid before the light-dependent reactions demand them. 2. Early Photo-Regulatory Nudging (Incipient NPQ)At 84°F and 60% RH, your stomata are completely open. If your 14-fixture light matrix is pushing a high PPFD, the chloroplasts at the very tips of the leaves—which receive the most uniform light and highest wind velocity—are operating at 100% saturation. The faint yellowing means the plant has initiated Non-Photochemical Quenching (NPQ) at its furthest boundary. It is temporarily slowing down chlorophyll production right at the tip to dissipate excess photon energy as heat, protecting the rest of the leaf blade from building up harmful Reactive Oxygen Species (ROS). By incorporating marine crustacean biomass (shrimp and crab chitin) into the substrate catalyzed by the N52 magnetic anchor and an earth battery, this engineers a highly advanced biochemical trigger. In standard agriculture, elicitors are used topically to simulate pest pressure. In this system, chitin functions as a continuous, molecular sub-surface signal. When this organic polymer interacts with the super-fluid, magnetized water, it unlocks a powerful bio-energetic loop that forces the plant to maximize terpene synthesis without experiencing actual tissue damage. Raw chitin is a dense, insoluble polymer made of long chains of N-acetylglucosamine. In a typical organic soil, breaking down this structure takes months. However, your root zone features active soil electrolysis and magnetically restructured water: The Micro-Solvation Process: Water molecules passing through the 10–20 cm high-flux N52 magnetic gradient undergo diamagnetic restructuring. Their hydrogen bonds loosen, lowering surface tension and turning the moisture into a superfluid. This highly fluid water penetrates the crystalline structure of the crustacean biomass much faster than standard irrigation water. Enzymatic Acceleration: The earth battery's direct-current micro-voltage alters localized redox states, increasing the metabolic speed of beneficial Plant Growth-Promoting Rhizobacteria (PGPR). These microbes rapidly produce chitinase enzymes, cleaving the dense chitin chains into low-molecular-weight, highly bioavailable chito-oligosaccharides.

6.6.25. 5th week of flower looking better but well under performing. Nice purple everywhere but this is my smallest harvest ever and that sucks. Still going to finish this grow, but to be honest can’t wait to start next!

I am not good at English But I will try to make this diary as easy to understand keep enjoy my diaries thx Thai420

14.09.21.Банане 2 недели, развитие сумасшедшее. Опрыскиваю по листу на ночь динамиксом.русские производители обещают эффект мегафола, а он мне понравился. Так как цена демократичная, я решил попробовать этого производителя. Также купил стимулятор для корней, аналог радифарм. Ок. Девчонке нравится. Лист выглядит здоровым, сочныма корневая мне не видна😁, но вершки хороши, значит и корешки в норме. Пересадили в 16 л airpot в 12 дней. Полет продолжается. Буду добавлять мысли в течение недели. Всем растафарай! 15.09.21 сегодня начались тренировки у девчонки. К lst я отношусь всегда творчески и с азартом. Каждое растение как и человек - уникально, тренировки интересны возможностью применять весь потенциал своей фантазии на 100%. За это растения благодарят нас большими урожаями и эстетической красотой. 17.09.21 Банана растёт и пухнет. Дал корневой стимулятор рутфарм. 2мл/л. Со вчерашнего дня у нас похолодание до +10 днем и +3 ночью, поэтому решено было включить днат 400, так как мой бокс расположен на балконе. Ещё немного подогнул ствол и убрал листья от боковых побегов. Полет продолжается, спасибо за ваше внимание, гровер!)) 19.09.21. Немного растянуд девчонку сегодня днем, растёт не плохо, но видно, что после пересадки переключилась на корни. Поливаю через день, полет продолжается! Всем спасибо, что уделяет внимание моему дневнику🙏🙏🙏

Finally harvested

Buds Incoming & Balcony Patrol Engaged 🐾🌸 We’ve officially hit Week 2 of flowering, and the signs are now impossible to miss—pistils and early flower sites are popping up all over! After running 11/13 light cycle in the tent, I’m seeing the payoff: compact structure, steady stretch, and the first sparkling hints of what’s to come. 💡🌿 This week was all about keeping her supported during this crucial transition. Here’s what she got on her plate: Foliar Silica spray for strength and resilience 🌬️ A full round of Alg·A·Mic, Bio-Grow, Bio-Bloom, Top·Max & Cal-Mag 💧 pH adjusted to 6.6 using Bio pH- 🌡️ A fresh brew of compost tea followed by Effective Microorganisms two days later for that living soil magic 🔁 And honestly? She’s thriving. Strong posture, vibrant color, no signs of stress—and just enough stretch to let those future colas shine. I really feel like she’s found her rhythm now. Bonus moment of the week: My cat discovered the balcony and decided to join me for a little garden patrol. First sniff, first paw on the tiles—it’s officially a shared project now. 😺🌿 We’re stepping into bloom with style, strength, and a bit of feline approval. Can’t wait to see those buds start stacking! Stay tuned—this Red Hot Cookies is just getting warmed up. 🍓🔥

Great structural progress this week. I adjusted the first LST on all Tropicanna Poison plants and they responded perfectly — fast recovery, strong lateral growth and a very even canopy. Installed the SCROG net at ~26–30 cm to prepare for the next stage. I also switched to the automatic drip system (2 L/h emitters). The nutrient mix needed a few corrections, but the final feed landed at EC ~850 µS / pH ~5.8, giving each plant 700 ml. Soil dried quickly and the roots are clearly active. Environment stayed stable at 22–23°C, 65–70% RH and PPFD ~420 µmol/m²/s. All plants look healthy, compact and already releasing a nice sweet cannabis aroma.

plain water feed only from now til harvest

Hi all 😁 Hope everyone keeping well and having a wonderful week! Thank you all for such amazing support on this bananas journey 💚💚💚 Will be updating this week journal daily so please remember to revisit to see full week content. So far this grow it's going great. Girls are stretching by hour. Great health, nice green colours, more and more squares taken on the netting, flowering nicely progressing, I'm very happy 😁 Planning to apply more selective defoliation, especially to Xena. No changes to nutes except few extra drops of calmag just in case and will try to fill the net entirely. Week 7 Nov 27- Dec 3 Nov 27 Selective defoliation applied on Xena. 8-10 mainly small fan leaves. She is still a bit shy to open as much as her sister. No rush my girl. You still doing great! Nov 28 First watering for this week. 7ltr beetwen them both with 4h spread. Runoffs. Xena 300ml PH 6.1 Athena 250ml PH 6.4 😁. So far the largest amount of my magic mixture consumed by my 🍌💜👊 girls. Well done👏 Nov 29-30 Leaves tucking and joyful observation🤓 Dec 1 Selective defoliation and first stage of lolipopping on both girls. Decided to go a bit heavier as tomorrow heading for trip and wont see my girls until Tuesday! They will be all alone without any supervision so hopefully they will behave and I will be nicely surprised of their development on my return. Watered with 2tr mixture and sprayed with water and fish mix solution right after defoliation. Planning to feed them tomorrow as much possible 6-7ltr before heading off to our voyage to Amsterdam 😎 do anyone know ls if any of coffeeshops have Fastbuds strains available? Would love to try 🍌💜👊🤤😋 Dec 2 Girls watered as above and both PH 6.4 on runoffs. Dec 3 Girls are unsupervised until December 5th. Thank you all for such amazing support on this journey 😊 love you all!!, 💚💚💚 Stay tuned for upcoming week update right after my return. Peace and love brothers and sisters ✌️💚

Just watering for the last week. Will be getting the chop next

After more than 100 days she was hung up to harvest 👍 Hey Guys :-) It was hung upside down in the drying tent for 10-14 days at a temperature of 18-19 degrees and 55-58% humidity before it was trimmed clean by hand and put into the glass with Boveda 62%. The glass was opened every day for 15 minutes to air and the buds were taken out individually for the first few days. Now after another week the pictures were taken then put back in the jar where they now stay complete for 4-6 days. After another 2 weeks, the Boveda 58% comes into the glass and it's perfect 💚😊. Report : As always, Dr Grinspoon from Barneys farm is top notch. The smell, the look is everything :-) . She has grown extremely tall as always but due to heavy LST she ended up at 70cm with a very good yield. The rest follows in Smoke report

Day 53 Started to flush the Fruitspirit finally i see some amber trichomes 😆 Flushing just with plain water PH 6.5 I will do closeups tomorrow! 💪 Skittelz is packing on buds as she should.... She isnt the biggest fan of high nutrient content but looks like pure Indica power! Green gelato is an crazy.... I dont understand this bud 👽 She looks amber enaught to be harvested but she is still putting on weight and I wanna give her all the time she needs Day 54 Took some closeups today and as you can see only weeks to go👻 The smell of the Gelato is so overpowering I love it 😁 im so happy that I took some clones they will grow outside soon if when they are strong enaught💪💪😅 Today i added a fresh pack of TNB Natural Co2 Enhancer for the final flower weeks....

Day. 2 - watering and LST. May switch to blooming nutrients today. New product called C-results (organic). I will be using this.. only needs to be applied once.

First week of florwering is over. They all already show pistills so induction was successful. I did a little defoliation to uncover bud sites and LST-d Strawberry Cough since it was much higher than the rest of the ladies. Now I do have even-ish canopy. CA$H and Mimozz are going superb. Cough is okay, not great, not bad. Grandpa's Cookies is a runt but I'll try to have at least some weed from this one also 💪

LED dimmed down to 40%, i.e. 48 Watt. Tatanka Pure CBD Seed died on 2nd day (watch Video). Replacing it with Painkiller XL and Northern Light auto - hopefully they spout fast and healthy this time.