The Grow Awards 2026 🏆
Likes
Comments
Share
Last Week i did in my Opinion the last Defoliation and clean up the Bottom. But after a Week there are no light Penetration under the Canopy. So i decided to take a few more Leaves Deep Red runs all the 12 hours. Infrared 15 mins before light goes on and off. And UV Light every Hour for 10 Mins
Likes
6
Share
@RFarm21
Follow
Week 23 november - 29 november 23 november - D1 flower
Likes
28
Share
Pretty happy so far, kept EC the same as there was a slight tip burn when I tried to up the nutrients.
Likes
91
Share
@CANNASIM
Follow
GENERAL COMMENT. This week ran nicely for the two girls, of course one is going slower than the other. RQS STRESS KILLER AUTO. Super happy with the results so far, she grew nice size buds, in the surrounding and a big fat main cola, just beautiful. As we are entering the last week, of last tree days, I choose to lollipop and take do a pre harvest defoliation, the reasons for that is mould and rot, I started to become insecure because she didn’t have airflow and as i was flushing humidity started to raise, all good, and now just approaching harvest! Flushing with flawless finish and tap water.
Likes
7
Share
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
17
Share
Hallo hallo :) meine Woche war sehr gut .. sie fängt jetzt richtig an die Seitenarme hervorzubringen ^^ ich habe sie am 29.09 getoppt- Topping !! Ich werde sie noch eine Woche oder zwei wachsen lassen & werde dann warscheinlich die Uhr zur Blüte umstellen Ich habe am 01.10 wieder enhancer benutzt & zwar die 1g die auf 2 Liter Erde vorgegeben sind als Oberflächendüngung aufgetragen & nach gegossen :) Ich weis leider nicht genau wie viel ich giese aber ich mache sie jeden Tag so voll das sie gut schwer ist & am nächsten morgen ist sie dann aber schon wieder leicht :) Bis nächste Woche
Processing
Likes
6
Share
@ladyjane
Follow
6/13 - It's the beginning of week 3 and 2 of my 3 Jack Herers are suffering from Zinc deficiency. I noticed this yesterday and believe this is a root issue and not a pH issue. They have most likely outgrown these little 4 inch nursery pots and used up all the nutrients in the soil. I'm about a week late in transplanting them as is. I was going to do it last week, but my schedule got thrown off. I knew I would have to leave them in a bit longer so I gave them a very light feeding last week as I was afraid to burn them. However, it turns out for these two, it most likely wasn't enough. I will be transplanting them into 1 gal pots tomorrow with brand new Roots Organic original soil amended with Roots Organics Uprising Foundation. That should take care of any issues. 6/15 - Transplanted all three Jacks into 1 gallon pots. I started with Roots Organics Original soil then added some Oregonism XL to the root ball and a good amount inside of the hole before planting. Then, I top dressed all with some Uprising Foundation also by Roots Organics. . For gnat prevention, I used Bti (Bacillus thuringiensis) aka mosquito bits. I also added some Uprising Grow, as a dry amendment to the one plant that were showing deficiencies for a little extra boost going forward. Finally, I watered everyone with compost tea that I brewed for 18 hrs. They are already looking stronger and healthier.
Likes
1
Share
@terbs
Follow
Harvested the Purple Lemonade. Smell of the flower is extreme! Most of the rosin is coming from the cuttings of the Tropicana Cookies. However, I have not been able to “cure” the cuttings of the other plants at a controlled 62% humidity, so this may not be a meaningful result. Thought a little more Anthocyan would surive, but i may have to press @ 160 Mikron next time, will try :)
Likes
1
Share
Look how much these beauty's stretch as they went into flower over the moon with the size of these plants
Likes
19
Share
@MrJones
Follow
Cinderella Auto 04.20.23 ~~~~~~~~~~~~~~~~~~ Day 13 - Above Ground 🔸05.06.23 -So these girls continue to be amazing, scuffed up the soil today, and added airstones to my reservoir, even though it is just water maybe the plants will enjoy the extra oxygen!, the Medic Grow Smart 8 LED is doing very well, at 40% the plants are getting plenty of light and not showing any signs of over-stretching! 🔸05.03.23 - Just over the last 4 days these plants are just growing vigorously and healthy, first real watering today and the plants are starting to eat that Gaia Green amended soil and loving it, the Medic Grow Smart 8 LED is doing very well, at 40% the plants are getting plenty of light and not showing any signs of over-stretching! ~~~~~~~~~~~ 📝@fastbuds_official 📝Soil - ProMix HP 📝Medic Grow Smart 8 LED / Light Settings: 40% - V1 📝@medicgrow420 📝@gaiagreenorganics ~~~~~~~~~~~~~ 📝Cinderella Auto - grows dark-green thick buds with elongated large-sized calyxes and lots and lots of long amber hairs all over them.
Likes
68
Share
@Roberts
Follow
Auto Northern Dragon Fuel is coming to a end soon. She is starting her ripen stage. I have flushed her with ph water and will about every other day till finish. She has about 10 to 12 days left. My next update might be the harvest if nothing special happens. I will see when she gets there. The diesel apple wood snell is very interesting. Makes me curious to how she will taste. That is all that is going on at the moment. Thank you Medic Grow, and Super Sativa Seed Club. 🤜🏻🤛🏻🌱❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
27
Share
7 weeks now she’s a real beauty this lemon, plenty of bud sites on her now as she’s just coming into flowering now think this one might be a late bloomer!! Hope you enjoy the pics 🍋🏝️Just had my ACL reattached so might struggle to keep up with my diaries 😪🤞
Processing
Likes
10
Share
@BodyByVio
Follow
After 21 days in turbo cloner I transplanted 4 Sweet seeds Green Poison into 1 gallon plastic pots filled with Cana coco. Few days later I transplanted another 4 clones into DWC! Stay tuned! Coco feed at 700ppm Dwc feed at 480ppm
Likes
9
Share
Growth slowed a little due to lights off temps dropping during the snow we had early December. Not worried about it. For the love of ganja
Likes
45
Share
Cepa muy facil de cultivar , tuve un par de problemas en el cultivo , tuve plaga y algunos otros problemas , aun asi supimos sacar adelante y cosechar plantas muy ricas y agradables al fumar . En lo que consierne a mi gane experiencia y espero poner mas conocimientos en practica para el siguiente cultivo
Processing
Likes
11
Share
They’re looking extremely healthy..gave em their first nute feed with the last watering seem to be doing fairly well..fimmed the GG and LST. Did not touch the unkown as it looks smaller to be the same age. Running GHE base line with few extra supplements. ****UPDATE**** Both are LST’d..might rethink the way I tie them. Going for a “coil” type look, we’ll see though. They’re looking great! Hoping for females!