The stretch has started. Very manageable since they started flower on the shorter side. Some adjustment to feeding and a good leaf striping mid week. Pheno number 1 has broad leaves and a very tight node spacing compared to the other four. Number 3 has shown to be very vigorous in growth and cloning. Number 2 is the runt and slow but stinks. The others are very similar. The girls got fed after the leaf strip the next day they looked really happy.

MAY 26TH 2024 - The gen 1 & gen 2 mom's have recently been cut back & lights have been dialed down to 35% to slow the growth down on the mom's until they are needed for cloning in a couple months. We have gotten it down to a science now with how to manicure them & cut them back then have them re-grow out again. I am VERY proud of myself as this is my first attempt at growing out mothers myself. I have always vegged out seeds & flowered from seeds with my own previous smaller ACMPR grows, Then managing other peoples grows they usually bought clones in I never had the opportunity to learn this aspect of cultivation, Until now & I feel we are doing very good ! These things are monsters and are super healthy and strong. With that said I would love any input or advice for growing out mother plants that we could use to improve even further ! I am always open to learning more. @seedsman The RUDE BOI OG seed has to be at least 5-6 years of age & it germinated no problem, I burned it with the bar LED's too close to them when they first germinated and it looked touch and go for awhile but I did not give up on her now she is going to be one of THE best moms, Wait and see ! Also, BE WARNED if you use these fabric pots that are supposed to air prune the roots for you & allow you to keep the plants in them indefinitely. The ORIGINAL set of them worked great on our first batch of mom's, BUT we almost lost the generation 2 mothers because of them failing and the roots grew right out the bottoms of the bags into the run off's from the feeds and almost messed up the generation 2 mother plant's luckily we spotted it, Transplanted them out into different fabric bags & resolved the issue. These ladies are almost 6 months old & going strong ! DO YOU want to grow mother plants LIKE THESE ? Then grab some LIGHTS, TENTS, SEEDS & NUTRIENTS FROM OUR SPONSORS !! PROMO CODE GREEN PLANET : LEGACY PROMO CODE MARS HYDRO : LEGACY PROMO CODE SEEDSMAN : LEGACY10 MAKE SURE TO FOLLOW OUR SOCIALS & JOIN OUR GREAT COMMUNITIES ! TWITTER : https://x.com/LegacyMrketFarm YOUTUBE : www.youtube.com/channel/UCR89iF2Iqy3zlHZhFfU2MMg YOUTUBE GAMING : www.youtube.com/channel/UCw8-qCFg-PUf00waTO5JOGw

Great experience sharing my 1st grow, you will see me more around 👊

Day:31 Because of heat stress bush looks like it has LST.

i think i would harvest on Jan 1 or 2nd

Smooth week, lots of trimming and approaching the end of the harvest now (for the autos)

Finally they start to load up a bit. Will feed them till end of week 6 (flower). They look healthy and strong. Cant wait to try them !

Welcome to my Tropical Tangie From Dutch-Passion. This update is all pics I had for flowering phase. Sadly a lot of time was missed, (pics/videos) and such, as family stuff hit this crop, I just finished off the last of the puff this week. So, I have her taste and qualities fresh in my mind. So, stay tuned as full harvest & smoke review coming in the next day or two. Took a little over 8 weeks to flower. 60 days. Pre Flower she didn't really stretch so she'd be a ringer for a good SOG. The plant started to develop a lovely tangie smell early. I hit her with a the SE5000 and was at the edge. Picking up a lovely shape. The buds started to develop really nicely. Swollen calyexs, with fuzzy tops, dripping in shiny glistening trichomes. Was HST'ed early into the flowering phase. Knowing that HST works best after PRE flower has ended im sure id of gotten bigger buds. But what I did get was 21 grams of premium A grade HomeGrown. (More 2 come on that topic) Really happy with this girl and her strenghts. As a lot of my crop suffered from light exhaustion. Co2 was kept steady and the process of ppfd intake was really high and not enough co2 which led to the plant eating the very thing needed to push your plants, sugars, co2, light. And the ppfd was been kept up but sadly the co2 was not. But, she pushed through it the best out of the bunch. Hitting highs of 35c. Brought it down to 28 the last 10 days or so and cut the ppfd in half and dropped and extra co2. She ate all the Fungi in the pot, and was a happy lady. As you might be able to tell. I'm talking about this girl in the past tents, and that is because this girl and her whole 21grams got 1.5 months cure. I was smoking it upon curing also. Defo one of the best tangie puffs I've had in a long time. Brief flowering phase(s) reviews: Total time 90 days. 9 clones taken, but sadly I had to ditch that plan. I HST'ed this girl just as she was moving into pre flower. And was a very hardy girl. Drenched in sticky trichones she glistened under the light during late flowering period. Will defo be doing a SOG as she hardly stretched at all during pre flower probably 8cm, and there was a big swing in lights on/off 35c / 23c. Very easy girl to maintain and very hardy to harsh conditions. Thanks to Spider-Farmer for providing the light and to dutch for allowing me to try this baby. As I said. Harvest and puff review coming soon. She isn't a house stinker. So, some light air cleaning with an air filter and you'll be golden. But, don't be but off by this. As she'll be a stinker upon finishing or at least doing 4 weeks of curing. (More in the harvest update coming soon). 90 days + 48hr dark rest and 10 days drying at 19c and 70% rh. (Gen not my ideal conditions for drying but done 3 of my girls this way, and they're probably my best dried plants ever. No bush whack smell (hay smell).. some very nice bud that grinds a treat. Takes a little longer to dry but no dropping the RH, it must of been the steady conditions that made them some good owl phenos.. Thanks for your views and so on. Glad to be back after my few months absence.

Ich musste mich etwas nach dem Wetter richten. Der Sommer hat sich etwas Zeit gelassen. Wir hatten hier noch einige kalte Nächte wo man die Damen dann zu viel hin und her räumen müsste. Dazu auch nicht so viel Sonne wie man sich wünscht. Das soll sich aber in der nächsten Zeit ändern. Um den werdenden Ladys bestmögliche Bedingungen im Outdoor-Bereich zu bieten muss man sich leider etwas nach dem Wetter richten. Daher werden die Seeds kommenden Mittwoch in ein Glas Wasser mit Seedbooster Plus von Plagron für 15/16 Stunden eingelegt bevor es zum keimen in die Anzuchttöpfe geht. Wenn alles nach Plan läuft, erblicken die Ladys spätestens Sonntag das Licht der Welt. Dann werden sie für die erste Woche kontrolliert im kleinen Anzuchtzelt angezogen. Spätestens den Sonntag darauf an Tag 7 kommen die jungen Damen in jeweils 11L Stofftöpfe. Die drei Ladys werden dann bis zu den ersten Blüteanzeichen in einem kleinen Gewächshaus Platz finden. 3 Seeds Auto Candy Bubatz XL von DutchPassion wurden in ein Glas mit Wasser und 2 Tropfen Seedbooster von Plagron für ca 15 Stunden eingelegt. Danach ging es für die Seeds in kleine Anzuchttöpfe. Mit einer kleinen Heizmatte unter den Anzuchttöpfen und den Kuppeln auf den Töpfen wird für das warm/feuchte Klima gesorgt, das die Seeds anfangs benötigen um zu keimen. Am Tag an dem die Ladys das Licht der Welt erblicken, kommen die Kuppeln ab und die Ladys spüren dann auch ihre ersten Luftzüge. Nach 3 Tagen in den Anzuchttöpfen hat eine Lady und nach 4 Tagen haben auch die beiden anderen Ladys das Licht der Welt erblickt. Das Substratgemisch besteht aus ca 75% BioBizz Lightmix und ca 25% Cocos mit Perliten. Auf das fertige Substratgemisch kommen dann noch ca 5% Megaworm von Plagron. Angegossen wurde mit 1g/L BioEnhancer und 1ml/L PowerRoots. Der ph-Wert wurde vor dem gießen auf 6.0 korrigiert. Jede Lady bekam für den Anfang ca 30ml in die Anzuchttöpfe. Möge der Grow beginnen.

#Crop King Seeds Planting 3 Seeds Using 2 Different Techniques to germinate the Seeds - The First 2 Seeds were germinated (Jul 2nd) using the water / paper towel technique * The seeds were dropped in a half glass of bottled water (It stayed afloat) and kept in a closed dark area. * After 12 Hours the 2 seeds were pushed down to reach the bottom of the glass using my finger. * After 24 hours the 2 seeds were transferred / Now using the paper towel method to complete the germination - The last seed was germinated (Jul 3) using just the paper towel method * This method took longer to break the seed surface. On Jul 6 Decided to transfer all 3 seedlings into the Aerogarden. * Seed G1 had about 5cm roots. Some flowers already sprouting * Seed G2 had about 3 cm roots. Still had seed top. * Seed G3 had only just cracked . No length

The aroma of Gelato #41 is simply exceptional, to the point that it fills the entire room with its intense and captivating fragrance. Each cultivation only strengthens my admiration for this strain, which will definitely remain one of my favorites, both for its quality and the sensory experience it provides. *** Gelato 41 has a sweet and creamy aroma, with notes of vanilla, berries, and a citrus touch. The flavor is smooth and creamy like a dessert, with lemon and mint on the exhale.

I can not believe.😲 We have reached the end of another magnificent journey made together on this splendid platform which gives ease and opportunity to learn and perform in the best crops I can already tell you that this baked tent is one of the best weeds I have ever grown so far! But this can also be seen from the contents. Spectacular colors, solid gems....and resin in rivers Stay updated for the white smoke 😋😎

Went home for Mardi Gras for 3 and a half days and came back to ladies loving life. I kinda over watered these ladies because I knew I wasn’t gonna be able to water them while gone and it worked out perfect I guess clan ask for anything more. The Black Cream auto shod be on the path to just focusing on bud development. She grew a half an inch this week so hopefully that the most she gonna stretch. Buds smell sweet somewhat strong. The Green Poison is on her way to be a monster jus now entering her flower phase. She may be going for 12 weeks at this rate none the less I jus going with the flow making sure I’m paying attention to plant and how she reacting each day. I don’t really see anyone using the dry amendments ,let alone the medium I’m using, so I I’m jus doing what’s recommended on the bag and letting the plant tell me so far can’t complain

week 5

Fastbuds Meme Video Contest

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Week 5 (28-2 to 5-3) 28-2 Temperature: 24.3 degrees (lights on) 19.7 degrees (lights off) Humidity: 56% (highest) 46% (lowest) Watering: None. Today i set the exhaust to setting 3. 29-2 Temperature: 23.9 degrees (lights on) 19.4 degrees (lights off) Humidity: 65% (highest) 48% (lowest) Watering: None. 1-3 Temperature: 24.5 degrees (lights on) 19.3 degrees (lights off) Humidity: 66% (highest) 51% (lowest) Watering: None. No pictures. Today i set the light to 75% strenght. 2-3 Temperature: 25.4 degrees (lights on) 20.2 degrees (lights off) Humidity: 59% (highest) 45% (lowest) Watering: None. Today i removed some fanleaves. 3-3 Temperature: 25.3 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) Watering: None. 4-3 Temperature: 23.6 degrees (lights on) 19.7 degrees (lights off) Humidity: 65% (highest) 46% (lowest) Watering: Both 1500 ml. No pictures. 5-3 Temperature: 25.5 degrees (lights on) 19.4 degrees (lights off) Humidity: 61% (highest) 49% (lowest) Watering: None.

Week4 of bloom, feeding Floranova Bloom, at 1tsp/gal. Each plant receives a glug or two from a 1gallon mixture. Runoff is removed. Happy growing!