Likes
Comments
Share
@Ninjabuds
Follow
My LIT Marker plant is thriving, and it's interesting to see the similar leaf structure to the Black Valentine I grew from LIT Farms. I gave it a dose of calcium this week, hoping it will help green up the leaves and keep it healthy. It's been a challenging week with the constant rain and ridiculously high humidity. Keeping things dry indoors has been a real struggle. Despite the weather, I managed to flip all my feminized photoperiod plants to flower this week. I'm hoping the switch will go smoothly, but with this humidity, it's going to be tough.
Likes
7
Share
@Salokin
Follow
Hi growmies, another try to update this diary. She is developing nicely, however is to big and has light stress I believe.
Likes
7
Share
Anfang der 3. Blütewoche haben wir beide Entlaubt und Lollipopping angewendet. Jetzt brauchen beide Zeit um sich zu erholen.
Likes
16
Share
@GYOweed
Follow
I got candy stripes and slight N deficiency. Gonna give it extra aminos and tiny amount urea for N. They are drinking a lot so i up the feed.
Likes
46
Share
@Daweed83
Follow
All good in the hood ! they look good to me and growing nicely. Much bushier than the El chapos but buds are forming nicely. They look one week behind El chapos ones but lets see. Im planning on giving them another 4 weeks of nutes + 1 week of flush. Please let me know if you see anything wrong on my ladies 🖖🏽🖖🏽
Processing
Likes
5
Share
In this week, most of the plants have developed pistils. I will keep using vegetation fertilizer for a few days, until they evolve completely. I also decided to use scrog method to keep the plants at the same height.
Likes
8
Share
In der finalen achten Vegetationswoche wurde die Blue Lobster von Cipher Genetics mit einem letzten großen Training auf die Blüte vorbereitet. Um das Maximum aus der Genetik herauszuholen, gab es eine intensive Entlaubung der großen Sonnensegel, die nun für eine optimale Lichtpenetration bis in die unteren Etagen sorgt. Zusätzlich wurde die Lady im unteren Drittel leicht "gelollipoppt", um schwache Triebe zu entfernen und die Energie gezielt in die Top-Buds zu lenken, was der Pflanze den nötigen Freiraum für den anstehenden Stretch verschafft. Mit einer homogenen, dichten Struktur und guter Blattfarbe steht der Busch extrem vital im Saft und ist bereit, in die generative Phase überzugehen.
Processing
Likes
17
Share
2/4: Photo session day! These are the fastest, most vigorously growing plants in the garden, but also the slowest to flower.😕 I had a total infestation of Cattus (felis) which I documented in my photos. Eradication seems impossible, so I'm opting to allow a degree of predation, but hoping trichome production will, at least, deter them soon.😁 2/5: I fed everybody today with about 3/4 gallon and sprayed them down with Axiom harpin proteins for the last time this run. I made a DIY CO2 generator today using a 5 gallon cat litter bucket, a small aquarium pump, some air line tubing, and a bubble stone, plus 6 cups of sugar and 30 grams of wine yeast in 2 gallons of warm water. I put the tube where the CO2 is exhausted up against the back of the oscillating fan that aims down over the plants so they are being constantly forcefully bombarded with high levels of CO2(1300+ppm) from above. I set the ac infinity controller to allow the temps to climb up to 89f before the fan turns on. 2/6: These girls are taller than anybody else in the garden, and still stretching (unfortunately). Surprisingly, they're also the slowest to pop pistils. They are flowering, but slow as hell for an indica dominant strain. I probably should have left them all in the dark for a full day when I switched to flower to encourage them to flip faster. I bought some Gro-Pro pot risers to elevate the pots so that they will dry out faster..seem pretty effective. 2/7: I foliar fed with big bloom and tiger bloom today. 2/8: I ordered a second 6" AC Infinity fan to connect to my controller, some ducting, and a diffuser which I'll mount to the wall, down near the floor. The fan unit will be in another closet, adjacent to the garden closet, and I'll run ducting up through that closet ceiling into the attic, with a filter on the end to keep bugs and particulates out. For the next 6 weeks or so, it will provide a supply of colder fresh air. I did the math, and it will now only take about 1 minute and 40 seconds to completely exchange the air in the closet. Depending on the outside air temp at the time, it should take anywhere between 8 and 20 minutes for the closet to heat back up to 80f and the fans to kick back on again. This Spring, on days when it's not cooler than 72f, I'll disconnect the duct in the closet and stretch it into that bedroom, clipped to the window unit air conditioner output, cranked down as low as it will go. This Summer, I'm gonna just run a pair of the quantum boards and grow 4 or 5 autos in there, but this should help keep the temps cooler in summer as well, without dedicating an air conditioner to the grow op.🙏 2/9: I foliar fed them with grow big, big bloom, and tiger bloom and checked moisture in their pots. They're due for a good watering tomorrow.
Likes
10
Share
@Lazuli
Follow
Preflowers show up ill remove the lst next week and let them go I still only give hard tapwater everytime the soil feels dry the soil was fertilized for 100 days, this week runoff comes out at around 2000ppm
Likes
7
Share
End of Week 6 of flower All seems ok Would have began flushing this week but not going to, she doesn't look ready for that
Likes
26
Share
Sun Dec 27 Witnessing a true Stretch heading into week 2 of flower. Hoping to keep Veg Nutrients high this week, and be prepared to switch/transition into the Flowering formulas at the sight of “Hairs” being formed on bud sites. -switched the direction of my light, to make the most efficient use of the light hood itself. Sticking with the diagonal set-up in the tent. Mon; chemistry is listed above ***plant was originally super-cropped between the 3rd & 4th node, there’s not much room underneath*** 4th / 5th node might be worth considering next time. - soil / sand-coating seems really dry. This 2nd week will see feeding every other day. Nutes will remain as is Until there’s changes ** Uv-B was brought to my attention a few weeks ago, (thx DoDrugs420) and I am going to run a side by side test on it. Later this week I plan to install a 18” uv-b tube above one of the two plants, for the duration of Flower. *** Working with stakes again is kinda fun. But I also remember nearly poking my eye out several times with them. Safety glasses and Marking the Ends of the Stakes is a really good method of preventing accidents *** Wed Dec 30th - Food includes Unsulphured Molasses tonight. Still including it every third watering/feeding -Going to wait one more feed before adding some bloom nutes. Crazy growth and activity at the bud sites. And no groups of gangly hairs Thurs Dec 31st “happy new year all !” Next feed will feature half Bloom half Veg nutes and will be on Jan 2nd -Uv-B bulb installed ~ 14” from angled canopy... -running it on a reduced schedule right now. 2 x 3 hours per nite till I get to see how the leaves like it Recommended **12 hr CMH / LED etc. = 8 hr Uv-B** - Uv-B Bulb found at a Pet Store ~ $34 cdn and a simple black light fixture ~ $33 got it up and running. UV-B light is Not to be viewed... it’s dangerous to human eyes / skin. Jan 1. Moving to Bloom food! New growth and the arrival of Hairs on both plants will see me start to change their diet. Tonight the first Bloom food will be given and the transition will be over 3 feeds. 1/3, 2/3 and full bloom recommendation. (Opposite with Medi-One) 2/3, 1/3, 0 -plants had many branches that needed to be repositioned and LST applied. Canopy was releveled. Cleaned out some useless leaves from the undercarriage -what a great way to start the new year. Having a tremendous grow... -going to slowly start pulling back on the Rapid Start, now that we are entering true flower stage. (4ml/gal down to 1.0-1.5ml/g by the end of week 6) Same goes for CaliMagic. I’ve taken it higher than previously, (5ml vs 2ml ) and the results are obvious. Time to let these numbers drop a bit, make room for Bloom.
Likes
17
Share
Likes
38
Share
Likes
8
Share
These girls are exploding with growth.im going to kinda let her go for the week with some tucking then probably defoliate the bushier two.there are definetly a couple pheno types here.2 tall and 2 short a bushy.i cant wait to see how these girls turn out.i can tell a huge difference since I switched back to soil.i used fox farm soil.my plants love it.
Likes
12
Share
*Week 5 of flowering* Mimosa 1 & 2 are progressing accordingly, 0 signs of deficiencies. Though both plants are coming along fine Mimosa 1 is lagging a little behind but not a cause for concern. Water/Nute feeds have increased and the light cycle remains the same. Mimosa (2) appears to have shrunk in size but that is incorrect, Main colas were tied down to trellis.
Likes
77
Share
La sposa chimica sta molto bene ha una bella struttura. .lei ha bisogno di 9 settimane di fioritura e visto che questo diario sta partecipando al contest della greenhouse che si concluderà tra piu di 100 giorni lascerò la ragazza ancora un po in vegetativa...devo dire che sono piacevolmente colpito da i fertilizzanti feeding forniti per la partecipazione al concorso dino ad ora stanno andando forte...vedremo con i fiori come si comporteranno....💚🌱
Likes
14
Share
Hey here we go again.. in the pics I explained how to clean the lava rocks but to make it easier I will put them here. LAVA ROCK CLEANING. 1... fill sink with hot water and about a half bottle of hydrogen peroxide . 2 ...dump rocks into sink 3....shake out rocks from roots...I suggest you do this in another sink then add lava rock to other sink..it keeps from adding to many roots to water sink. 4....skim off all roots from top of water...now while the lava rocks sit in the water..clean the buckets. 5...take fitting from buckets and add to a cup filled with hydrogen peroxide let sit 6...clean buckets with hot water and hydrogen peroxide....dry bucket 7...take fittings out of cup clean off and clean inside fittings..then wash off and put back into buckets. 8... use a colander and add lava rock to it and run hot water over the lava rock as you move them around...then add warm..then cold water this will help make the roots brittle and easy to remove...shake off all water. 9...put rocks back into buckets 10 ...set room back up with all new lines... Enjoy your grow, good luck, have fun Smoke a fatty..see you next week Help out a fellow grower.
Likes
8
Share
Smell of the plant is amazing. Smells like red Berries. Buds got huge and medium dense. I only harvested the 3 main buds as they are developed the most. The rest of the plant can stay for one more week. I Also removed some dead leaves.
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.