Slightly Light amber, but I'm cutting her. She really looks ripe. Also an infestation of sap eaters, so the plant is at it's end. The plant with long stem is not even 48 grams, very disappointing! Very thin flowers. Maybe if I'm lucky, I will have 10 gr 😞😞😞

😬 muy graciosa muy bonita sigue en su línea..

Decided to harvest . Some amber . I wanted a more head high so pulled . Smell is very dank a potent . Will update dry harvest and weight ASAP . Big buds main cola line two cone cans. Overall happy .

Día 13 (06/05) Nos acercamos al final de la fase plántula. A ver si ahora empiezan a crecer de forma explosiva! He sido muy estricto con los riegos, dejando que el top hasta el nudillo se seque completamente! Día 14 (07/05) Hago una mejora en la tienda. Hasta ahora tenia intracción pasiva, pero ahora he instalado una turbina para que impulse aire fresco dentro de la tienda Día 15 (08/05) Con el calor que hace me sorprende que las macetas sigan aguantando la humedad, pero al hundir el nudillo sigue húmeda. Mañana haré un riego de nuevo Día 16 (09/05) Relleno el top con sustrato para compensar la compactación y dar mas soporte a las plantas Riego con 300 ml solo H20 - pH 6,2 Día 17 (10/05) Baño de sol de dos horas. Día 18 (11/05) Baño de sol de dos horas Día 19 (12/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

~ FASTBUDS TESTER #2202 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today their tap roots were about 1/2 to 3/4" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened and the #2 isn't far behind! 12/5- Well this is the full Day One for the #2 FBT #2202 and the second day for her sister! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so I transferred her into her 4g Gronest pot. After making a hole in the medium for the peat pellet, I coated the entire surface with Xtreme Gardening Mycos then placed the pellet in the hole and planted her in. Lastly, I watered her in with about 4oz of de-chlorinated water with 3ml/g of FishShit added which was then ph'd to 6.4 @ 75℉ after which I placed a humidome over her for 24hrs to ensure that the humidity stays constant. The #2 tester is doing great and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙

February 14, 2019 update: I rearranged the plants to get better airflow. In the video I mentioned that I thought I saw what might be spider mites. After closer inspection, I don't think its spider mites but more likely a combination of left over damage from the fungus gnats that came in with my wife's plant a few weeks ago (now gone) as well as ph fluctuations. But I like getting airflow on the plants themselves anyway, I just wish the oscillation worked on the fan I have now. I'll buy a new fan or two with oscillation soon. Also I failed to mention it in the video but there is also a ceiling fan blowing down on the plants. Overall, I'm very happy. The DinaMed CBD+ has taken the lead in the bud development category, Nice fat buds that are very dense. Sticky and stinky as hell too. She is supposed to be somewhere in the teens for CBD percentage and less than 1% THC. I'm hoping she either comes in below 0.3% or has well over 1%. I'm allowed to submit for testing 3 weeks before harvest. I'm going to cut a mid level branch and submit for testing next weekend. My other DinaFem strain, Critical +, is doing great too! She's in the lead with the most trichome development. Her buds are coming along great also! Not super fat, at least not yet, but great shape, color, density and have I mentioned the trichome development yet? 👍 This one is supposed to have mild CBD, low single digits, but high THC. I'm looking forward to smoking this one! Next up I'll talk about my Cream & Cheese CBD+ from Seedsman. She's in the lead with just overall looking awesome!!! The buds are long and super healthy looking with tons of leaves along the branches and I've defoliated a few times. The remaining leaves don't seem to be blocking much because most branches are bent over due to the weight of the buds! She is supposed to be in the 20's with BOTH THC and CBD. I'm looking forward to smoking this one also! 💪 That leaves the 3 Cherry Hemp plants. They are the smallest 3 plants in the room, but are all looking very good as well. They look like they are in the lead with possibly being ready to harvest earliest. I'm seeing the most amount of darkened and curled in hairs on these 3. The largest/oldest of the 3 is starting to show fading on the leaves. She may be ready in the next week or two. I'm waiting to start seeing some amber trichomes, so far they are still all white. These are supposed to be around 16% CBD and less than 0.3% THC. I'll be taking these in for testing soon and will be using these strictly for making CBD products - Salves, Oils, Capsules, etc... I'll keep you posted on this. This week I fed MegaCrop and Cal-Mag Pro (both by Greenleaf Nutrients). I fed according to their feeding schedule for late bloom. I think I'm going to stick with Greenleaf Nutrients for the duration of this grow rather than changing it up as I have been. Its super easy stuff to work with. 👍

Day 88 Had a big ec spike, yesterday i've noticed some burned tips and i found the solution at 3.5.. Nothing that a few days of only ro can't fix.

Nothing to say about this week. They are growing very fast. A strech is noticeable and first signs of buds are visible. Hope they develope fast. The next week i will add BigBud

Flush day. Harvest in the next 10 days.......3/25 update!!! 24-36 hours darkness before harvest

1/17 - 1/24: An excellent week for all the plants. Solid, steady fattening and frosting over. The Zenzations smell amazing.

Cookie back under the net and a new 300W led and loving the all the room. Cherry still doing good in 2x2 but still has shown no white pistols yet.

These is a project in the we try (test) tge products of our sponsors to see how good they genetics are, for example we have know 6 seeds banks on these round. Sweetseeds with the dark devil auto have break the time record for seed on the ground , 20 hours , only these tine have the seeds from sweetseeds on the soil and they just jump out to 2 cm , simple amazing

Que pasa familia, vamos con la segunda semana de floracion de estas Lemonpaya feminizadas de fastbuds. Vamos al lío, de las 3 plantas, me quede con 2 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros que además provocó un shock que también solucione. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Hasta aquí todo, Buenos humos 💨💨💨

She‘s doing okay. Buds are building pretty nicely. Top leaves are yellowing just a bit.

SoCal Outdoor, 3.9g Autopots, coco, jacks RO Blue Gelato 41 is in week 3 of flower and still stretching. The plants range from 68-78 inches tall with thick 2” trunks. Two months old, unbelievable….. 3.9 gallon pots. Defoliated the plants twice this week to promote lollipoping and airflow. Little signs of nute stress as I added some koolbloom to punch the PK up. No pests, but the caterpillars 🐛 are definitely gonna show in a few weeks for sure. The Autopots are holding up pretty well. But I think the 3.9g pots will stunt the gelatos growth possibilities. My runtz is in a 15g fabric pot stuffed into an Autopot XXL and although it was about 6”tall 4 weeks ago - it is almost as big as the gelatos and growing faster every day. I have to move these to my secret spot and get them out of sight before they start stinking. Next, I’m gonna have to net them to keep the caterpillars out.

Gracias al equipo de FastBuds y XpertNutrients sin ellos esto no sería posible. 💐🍁 Gorilla Punch (Auto): Niveles fulminantes de THC. Testado en laboratorio con un 25,695 % en cannabinoides. Perfil rico en terpenos. Los complejos y sabrosos terpenos de esta variedad son codiciados tanto por los extractores como por los fabricantes de hachís. Rendimientos impresionantes. Los cultivadores pueden esperar hasta 550 g/m² de flores deliciosas y aromáticas, rebosantes de THC y otros jugosos cannabinoides. Prueba de excelencia. Dos premios al primer puesto en menos de dos años dejan claro que esta cepa es una auténtica campeona. 🌻🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/gorilla-punch-auto ⛽ XpertNutrients: es una empresa especializada en la producción y comercialización de fertilizantes líquidos 🍶y sustratos🐛, que garantizan los mejores resultados y cosechas de la más alta calidad. A través de una cuidadosa selección de materias primas y un proceso de producción avanzado, sus productos son sinónimo de resultados confiables. 🛒 Consigue aqui tus fertilizantes: https://xpertnutrients.com/es/sobre-nosotros/#:~:text=Xpert%20Nutrients%20es%20una%20empresa,de%20la%20m%C3%A1s%20alta%20calidad. 📆 Semana 11: Los cogollos comienzan a engordar y tomar un tono purpura precioso , esta semana el clima va a ser muy bueno, espero que formen unas buenas flores. En cuanto a resina, está bastante cargada

GOOD MORNING VIETNAM😈💚 Week 6 Day 35: Pics from this noon. Mutants main cola is strecthing like crazy😁 like 30 cm in a week. Not as many white pistils as the other 2 girls. Tb; i topped the 2 other ones. I'm lil worried mutant cola will continue streching till it hits light😁 they continue drinking lots of nute water and no complaints yet😎 One love 💚 Day 37: no nute burn!! I was fully expectin bad nute burn when i fed them on 1600ppm😁 but they seemed to be ok with it ä, although i gave them ph water the next day (36). I might be dumb but seeing the girls are not showing any sings of slowing down or nute burning and all checks out, i gave 900ppm feeding. ( All cal w 0.5 ). Colas have starting to see first snow💚 Day 38: Morning fellow greenthumbs💚 Today i defoliated #3 mutant, did some lst aswell. Gave feeding of 1.9 ec ph 5.7. checked runoff and came as 6.3 and ec 1.9 (might be high from 1600ppm feed😂) no signs of lockout or burns👌👌snapped brach yesterday cos forgot not to train after watering🙁 but got it taped up really quickly and seems like it has maked a recovery😇 Day 39: Had quite busy day as i germinated 2 other strains so no pics. Gave girls ph water of 5.9, 1.8L per gal. No news, mutant is streching but 1 and 2 are full flower and fattening sites😎💚 Day 40: gave #3 and #1 feeding and ph 6.3. skipped plant 2 cos pot was heavy and had still lil bit of runoff. Amazing budsite and frostness development! Even the fan leaves are getting real frosty❄️😎 Day 43: All good , giving 5.9ph 900ppm feedings and check runoff. Beatiful snowy tops😍

13.01.2026 Heute habe ich mir die Wurzeln unten am Topfboden angeguckt und es waren genug zu sehen. Dazukommt noch das die oberen blätter über den Topfrand wachsen, dies nehm ich immer als Indikator, dass bald das umtopfen beginnt. Also habe ich biobizz all Mix mit 1,5g Bio grow pro 1l Substrat hinzugefügt, waren dann insgesamt 16,5g auf die 11l. Wasser war mit calmag ausgeglichen und den ph habe ich auf 6,4-6,5 angehoben. Dazu habe ich dann 1g/l Wasser von dem Bio enhancer von Greenhouse feeding hinzu gegeben. Pro Topf habe ich 3l gegossen, das sollte erstmal für eine Weile reichen. Die sanlight habe ich so eingestellt, dass die ppfd gleich sind mit der mege aus dem Anzuchtzelt (320ppfd). Den luftbefeuchter habe ich ebenfalls angestellt und auf 65%eingestellt.