Week 18 (Week 10 Flower) Grow Diaries Report – Part One: Wrapping Up the Journey 🌱 Pre-Harvest Reflections This week has been a mix of emotions as we approach the final chapter of this grow. Let’s talk about why we made the decision to pre-harvest portions of the Gorilla Melon and Papaya Zoap. While both plants have been incredible performers, a few buds on each started showing early signs of bud rot. This is an unfortunate but natural challenge when growing such dense and resin-packed colas. The decision to harvest those sections early was made to protect the rest of the crop and ensure quality and integrity for the remaining flowers. Vigilance is key in a packed garden like ours, and careful monitoring ensured the rest of the room remained safe and thriving. 🌈 A Symphony of Colors and Frost The grow room is a visual masterpiece this week, with shades of deep purples, vibrant greens, and golden hues taking over. The fading is absolutely breathtaking, showcasing the natural progression of the plants as they near the end. Combine this with the insane level of frost blanketing the buds, and it’s safe to say this is one of the most beautiful gardens I’ve ever cultivated. ✨ Spectrum Management: The Secret to Stunning Results The current lighting setup is a game-changer: • 50% whites to maintain overall balance and structure. • 100% reds for enhanced ripening and color development. • 100% UVs to boost resin production and amplify those trichome levels. The ThinkGrow LEDs paired with the TrolMaster spectrum control system have truly unlocked the garden’s full potential. Watching the plants sparkle under this setup feels like seeing stars on a clear night—magical and unforgettable. 🌟 Quick Recap: The Journey So Far From seed to this incredible moment, this grow has been a testament to precision and passion. From germination to veg and through flowering, every detail was carefully tuned, every decision made with intention. Along the way, we navigated challenges like pests, mold, and environmental shifts, proving that adaptability and dedication are essential. And here we are, ready to bring this journey to a close with nothing short of perfection. Week 18 (Week 10 Flower) Grow Diaries Report – Part Two: The Tools That Made It Possible 💡 ThinkGrow LEDs: These lights have been the heartbeat of the grow, delivering unparalleled spectrum control and efficiency. The ability to fine-tune every stage of the plant’s life cycle has been a game-changer. 🌬️ AeroFan System: Consistently circulating air while keeping the environment balanced and mold-free. The AeroFan’s role in preventing hotspots and ensuring even coverage cannot be overstated. 📱 TrolMaster System: The brain behind the operation, the TrolMaster system has provided unmatched control and precision. From monitoring temperature and humidity to dialing in lighting and CO2, it has truly transformed how I grow. 🏕️ Tent-X Setup: The foundation of the grow, this tent provided the perfect space for controlled cultivation. Its design maximized efficiency while keeping everything neat and manageable. 🌡️ Sensors and Monitors: Every parameter was tracked with pinpoint accuracy. From VPD to soil moisture, the sensors ensured every need of the plants was met in real-time. Each tool, piece of gear, and setup component has worked seamlessly together, creating a true ecosystem of excellence. This grow wouldn’t have been the same without them. Ending with Gratitude and Excitement To the community: thank you for joining me on this incredible journey. Whether you’ve been here since the beginning or just tuned in, your support has been everything. From the lovers to the critics, you all push me to grow (pun intended). To the sponsors: ThinkGrow LED, TrolMaster, Aptus Holland, Pro-Mix Soil, and everyone else involved—your products are not just tools; they’re inspirations. And finally, to these plants: you’ve taught me patience, resilience, and the beauty of the process. 🔥 Next Up: Stay tuned for the epic harvest and a deep dive into the final results, from trichomes to yields and beyond. The end is just the beginning of the next adventure. 🌟 Let’s finish this grow strong! 🌱✨ Growers Love. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Fast Buds - DOGDOCT 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Overall this was a little bit of roller coaster with this strain none but two of the plants turned out the same I did accidentally herm one out but still was good I had one turn out more looking like the white widow and very frost but I would grow this again just to perfect it I know I could of gotten more out of this strain

Esta semana tome la decisión de cortar una planta anticipadamente, obviamente la más avanzada y madura de todas (la de las fotos con flash), para poder llenar la despensa, obviamente se guardó el peso para añadirlo al peso final. Se quitó la malla y se hizo defoliación para terminar el engorde, quedando solo 3 plantas al menos 1 semana o dos a que terminen de dar lo que tienen que engordar, ya veremos 👍

Bestva Quantum Board LM301B / Mr Hide seeds Semana de agua reposada únicamente. Están casi totalmente amarillas, lo que indica que se han lavado bien. Flores compactas, sanas, olorosas y pegajosas. Semana de cosecha 🤙🔥

Hi... So this is my first time taking things a bit more seriously. Open for tips and advice. usually looking fore flavor rather than production. First week on 250w Also, pics are taken with the mobile... better pics next week

#Day 123 #Week 6 flowering 💐 Oh my God, it's the 6th week of flowering The smell of children is crazy. This week I used advance hydroponics overdrive supplement at the rate of 2 mg/liter because it is really high quality. Thank you for your comment🙏🙏🌷🌷

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Was my first plant, but I'm happy with the result :))))

THX RQS for F1 seeds!

Day 65, 17th of November 2020: Very excited 😁 I just saw the red colour is coming along the leaves and the pistils so early I am so happy she will be a beauty ;) Streching has stopped buds are on the menu now... Some lollipopping (defoliation) has been done and also removed all the old LST's as the plant remains in shape from now. Fertilization is still the same like before happens every 2nd day with the ratio and mix above. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

Sorprendido por la noticia de mi primera colaboracion con MarsHydro 😊🙏 y muy sorprendido tambien por el envio de las semillas por parte de Sweet Seeds. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos tambien una carpa de 60x60x90, de nuestros amigos de MarsHydro, una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. Que decir de Barney's Farm uno de los mejores bancos de semillas a nivel mundial, con cepas que te sorprenderan. Barney´s Farm, MOBY DICK ha evolucionado una vez más siendo cruzado con nuestro BF Super Auto #1. Producción final impresionante, genética fuerte, robusta y perfectamente equilibrada creando una planta de energía Sativa dominante altamente resistente al moho. La versión de Moby Dick Auto es ahora más compacta, con un ciclo de crecimiento autofloreciente más corto, pero poco se ha perdido en sus capacidades de producción, potencia y sabor. 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ 🌻 Moby Dick Auto: https://www.barneysfarm.es/moby-dick-auto-562 📅 Dia 0: Germinacion con enraizante 📅 Dia 1: Siembra en maceta definitiva, riego con agua solamente, ya que siembro en sustrato y suele traer una EC de 1.5 - 1.8 📅 Dia 2: Riego con agua 📅 Dia 3: Descanso, ella esta feliz en su entorno MarsHydro 📅 Dia 4: Riego con agua 📅 Dia5: Descanso 📅 Dia 6: Descanso

As sementes chegaram em 17/11/2021, 5 dias após a compra no site. Dia 18/11/2021 - 12:00, coloquei a semente em um copo de agua para iniciar o processo de germinação. Dia 21/11/2021 - coloquei a semente no vaso de 7L 50% turfa 50% vermiculita. Esperando a gestação! atualização: a semente não germinou. Dia 23/11/2021 - coloquei as duas ultimas sementes para germinar no copo com água (comprei 3 sementes) Dia 24/11/2021 - Simplesmente nenhum sinal de germinação ainda, nunca uma semente demorou tanto para germinar, se é que irá germinar. 25/11/2021 - Finalmente 2/3 sementes germinaram!!!! grato pela ajuda! fim da semana! hora de decolar 🚀 É meu primeiro cultivo, espero que a comunidade possa me ajudar e compartilhar dicas, muito grato!

Eccoci alla fine!!!! Pianta dedicata al maestro Franco ❤️ Ottima resina, ottima forma, ottima genrtica!!! Super consigliata a tutti, odore molto forte di limone sembra il sapone per lavare i piatti “lava” Ora giù con le prossime!!! Grazie a tutti per il supporto ❤️🔥🌲

In the second week the plant has now started to produce its first set of single bladed leafs.

D-77 : Girls are going well and they are beautyful but, they are growing alot less than expected. They are 30cm behind they should be. I hope it is because of all the effort I made on the mainlining process at the beginning....

Days 50 - 56 Last week, I had a major lockout issue with my plants, so I’ve started monitoring both the irrigation and runoff water closely. I had to do three rounds of flushing, but after that, my lady started to recover, which was a relief! Since I'm going on vacation for the next 10 days, I’ve been working on setting up an autonomous irrigation system, which I successfully implemented and built yesterday. It uses three 12V water pumps controller by Arduino Uno via H-Bridge motor drivers, each dedicated to one plant. The system runs from 9 a.m. to 11 p.m., delivering around 250 mL of water per plant per session. This means each plant will get approximately 2.5 liters of water per day. I’ve mixed all the nutrients in advance. I know the ideal scenario would be to add the fertilizers just before each irrigation session, but unfortunately, that’s not possible. Still, it’s better than nothing. The system has been running smoothly since this morning, and so far, the cycle works fine. I’ll improve it further when I get back from vacation. To prevent any future lockout issues, I’ve extended the irrigation cycles throughout the day to ensure the coco stays consistently moist.

These have been on water there entire lifes I'm I am a new grower and learned the hard way have now got a full parcel of green buzz liquids on the way

The grape is still a little slower than her sister but was last time and she’s destined to be a smaller plant it’s in her genetics! Her max height is 120cm and that’s what I’m aiming for! The purple urkle is thriving! She’s growing an inch a day or so and producing so many extra branches! Thanks to dynomyco! I have added a new light in there too! Mars hydro TSW2000 so will get a better yield! I literally have no light loss! I’ll be flipping anytime soon now! As my elder girls are at 6 weeks nearly! I’ve also added a transparent PNG logo for WeedSeedsExpress for anyone else growing there strains just save the picture directly! And you can overlap it on videos and photos!