FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Lowered the ppm of the nutrient solution. Leaves starting to yellow.

Sprouted from soil after 3 days! This diary will cover the complete growth cycle, seed to harvest, of this photoperiod strain from RQS, including drying, trimming and weighing. I’m planting this seed together with some autoflowers that just entered in the flowering stage. The ideea is to fill the tent as much as possible since the autoflowers gonna be chopped by the time this pheno will be ready to switch from veg to flower.

27.6.2k24 Start flowering ✅💚👌

Going really well, getting big colas! Had to do a lot of defoliation as they were really bushy, blocking air & light & also starting to rub up against each other & also sweating leaves. Removed a lot of popcorn growth & lower growth that wasn't getting enough light, this created more space for air& light around the colas. Super sticky & very smelly. Gorilla cookies is getting close to finishing up. Want Quality genetics to grow? If so you can't go past Fast Buds! Enter the code GROWEED when purchasing for a 15% discount.

Hello Growers and Sponsors Hope you all are doing well 🙏 my lemonade haze girls have doubled their mass in the last 2 weeks, they smell much more intense now, when i smell the buds or rub the leaves it actually smells like i cut open a lemon 😀 i will now reduce the fertilizer dose even further but leave calmag 1ml/l for another week, the trichomes slowly turn from clear to milky and the end is near. I will harvest when I have at least 100-90% milky trichomes and 10-5% amber. these plants have not shown any signs of overfeeding, stress or any other disease the whole grow so far, i am slowly reducing the light intensity as well as DLI, the plants are in the final stages of flowering. Thank you for taking the time to accompany and support me 👊 I appreciate it very much, stay healthy friends 🙏

01/01/2022 Potting up and amending with 5-2-4 to give a little kick before mid flower #6 is first girl to show herself, also got two different males and only difference is that one is lighter green and other darker green (also dark green one seems to drink more than lighter green) 💚. Other than that structure is very similar I wonder which is a better breeding male? I guess I might pollinate and LABEL TWO BRANCHES ON each female one for each male. and find out.🙏🏻 01/06/2022 #3 showed today, reppoted and into flowering closet, along with#6,who showed earlier this week lights at 14-10 see how they respond to that schedule, which should help use up the 5-2-4 going into week 3 should help with her stretch. Which isn't really that much I believe maybe double her current height, which I will check at lights on.Week ,#3 if I think of it I'll give a good fungal dominant tea.

Starting week 9 Nothing to do, expect Trichome checking.. Still needs a few Days, but i think she will finish this week. Day94 She's finally done 👍👍 Tomorrow morning she get chopped

Just hit day 10 of flower this net has about 20% touching the 2nd trellis. And about 70% almost touching. The Saskatoon Berry plants are very close node spacing. The bud formations are already prevalent.

🍁 Mexikan Airlines Automatik (42 Fast Buds) Endphase 💪🏻

Day 49! Starting to give her just plain water for 2 weeks of flushing. Getting really excited to harvest and then get going on another grow. See you next week.

Como mencionaba en el 1er video por intensas lluvias y vientos, la planta más grande se ha partido, intente "repararlo" pero será cuestión de días para ver si ha sobrevivido o no. Por las dudas he regado( a pesar de la lluvia) 1ml x litro de agua. La cantidad de la misma fue de 3litros con flora booster.

03/01 Wow, I’m honestly blown away by how this grow is progressing! In the last 24 hours alone, they’ve guzzled an incredible 45 liters of water. 😲 I mean, seriously, that’s insane! The stretch is probably just about wrapping up, so I’m keeping busy tying them down for now. Once the stretch is over, I’ll be going in for some selective pruning—there are just so many new shoots popping up. I’ve got to say, I’ve never seen growth like this before. It’s exhausting, though, and I’ve already run out of zip ties again! 😂 So, tomorrow’s mission: stock up on more. I’ve noticed a few slightly discolored leaf tips here and there, but it’s really minimal. That’s exactly what I’m aiming for—pushing them right to the edge without overfeeding. 🎯 Also, I just realized it’s been over a week since I added any CO2. Maybe that’s why I’m seeing these tiny signs? 🤔 Something to experiment with moving forward. Honestly, I’m so curious to see where this grow takes me—there’s so much potential in these plants! Stay tuned, folks. 🌿💪 06/01: Last night, I started defoliating, and I really went at it with a ruthless approach. I didn’t worry about branches snapping while scrogging—my philosophy is simple: the strongest will survive, and the weakest will wither away. Survival of the fittest in action! I also noticed that one plant seems to be either too wet or too dry. I’ll need to keep an eye on this one because there’s quite a bit of dying foliage at the bottom. My gut tells me it’s slightly overwatered, although that shouldn’t really be an issue with coco. Still, better safe than sorry! 🌱💪

* FastBuds Cherry Cola Auto - 10/08 - Week 2 Veg* Coming into week 2 Veg thus far all is moving accordingly - Lite water feeds - Frequent Lite Nute Feeding has started

.

I should be just one more week of flush let me kno what’s y’all take on these two girl I know they are towards the end I don’t have much time left even I wanted to do them longer plus anyways I have some things on veg that I need to get started flowering so this has become like a full time job I’m not complaining tho 😊

goow good 🌧️🍀🍃