2020-08-11 Another week gone by... Plant 01 is still fattening up, drinking normally. Plant 02 has been completely choked out of the lights so it's not doing very well. Keeping the nutrients the same as they are both pretty steadily drinking. Some death amongst the lower leaves on plant 02 and the buds are getting trichomes but not getting very fat. Plant 01 is very dense and sticky af. Excited to harvest in a couple weeks! The tent is definitely ugly as hell and the vegetative state clearly went on for about 2 weeks too long (first time grower) while I messed up the nutrients and other things that caused them to grow slowly. The 2nd plant never really recovered. I have continued defoliating and super-cropping plant 01 away from the light and keeping the distances even... It's an ugly canopy, can't wait for the next one so I can get it right!!

Marker is thriving, with a hearty appetite. It's even begun to display vibrant leaf color changes, looking absolutely stunning! 🌿🌈 Keep up the good work!

Day 63 - Watered PH'd water to 6.18 - Spun under light for even tan - Sampled a piece of the Wiz Stash Remix under the microscope 😳 - Vibe: 😏 Day 64 - Gummi Bears looks VASTLY different. I'm hoping for hefty buds. Lifted this plant up closer to the light for the sake of the larger buds 2x4 placed underneath pan. - Six Stash Remix is gorgeous cannot get enough of her beauty - Both are VERY thirsty - Gorilla Cookies not as thirsty - but also not really getting fat - Check out the cool Timelapse - Vibe: 😎 Day 43 - 3 Bears OG x Samsquanch - LST is going GREAT - Very healthy and happy - I broke a main cola off the top - Praying my tape will help her heal. - Vibe:😰 Day 66 - Buds are fattening - White hairs are substantial - Scent is strong - Very sticky - Vibe: 😎 - Readings -- Lights 18/6 - Level 10 -- Temp: 70 (ideal) | 72.2 (avg) -- Humidity: 55% | 55.5% -- VPD: 1.2 | 1.2 kPa - Vibe: 😇 "Show up, show up, show up, and after a while the muse shows up, too." — Isabel Allende

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Week 8 - day 50! Day 8 of flower. All of them are still going on strong! Loving there feed and no complaints whatsoever! Gonna raise the light over the weekend as it's a little too close for my liking, girls don't seem to mind! This is definitely a jungle 😂 Getting a heater when I'm paid to keep humidity low during lights off, lights on the humidity sits around 55% which is perfect but lights off it's getting far too high! Don't want to put in all the effort only to let mold ruin my entire crop! I will also get another fan, they need plenty of air circulation because they are all so close together! The flowers are starting to come through the scrog now, each of them are beginning to stretch too! Exciting times ahead! Feeding 2 litres every 2-4 days! I'm really impressed with these 3 gallon fabric pots too! I just hope the roots don't get root bound!!! They seem to be doing fine so far 😁 Happy growing guys and gals! The buds are coming!! Day 56 - video upload, looks pretty beautiful 😍

Indoor de madera melanina cuyo tamaño es de 70x70 Led Dragon Osram 2 paneles 60W

Flowering has beyond started, looks beautiful and healthy, smells fantastic lol. Hope these continue to bring me happiness. Just put the netting in, she is budding i believe hopefully i get some juicy nugs out of this

No han habido muchos cambios en cuanto a la nutricion. Añadimos un poco de Recharge, agua y estare añadiendo un producto para engordar las flores. Los mantengo al tanto, buenos humos!

start of week 3 flower | stretch ended perfect height | looking good so far |

This week she has been bulking those nuggets peppered all over, I am hoping she can be healthy enough to swell those Calyxes, because she was stressed few times during her growth and the last one is the change from hps to leds... She had to adapt to those intense leds... Found spider mites on one plants next to her but they are not interested in her, still found few on her and did a careful inspection/eradication but only 4 were found... I think she stink too much for them lol that gassy fuel from the swamp is not on their list! Only water this week she was given. I am trying not to rub those sugar leaves for a sniff too often!🙄😜 It seems the less I touched them the better they are😁, so I use a wooden stick now when I need to move leaves or buds. She is becoming one of my favorite plant, she is fussy yes but very special smell and look, I am so pleased I have made cuttings this time in case and if her high is as good as her smell she will be the first mother plant I will try to keep!

Hello Growmies 👊💚 the plants look happy and that's the way it should be 😀 I've topped all the plants, now I'm giving them some time to recover. unfortunately there will be no mainlining this time, it will be topping and lollipoping i aim for 16-32 colas per plant. I will train a Gorilla glue #4 clone with so I have 4 big plants for my 4 x 4 grow tent. Wish you all a blessed week friends 👊💚

The first week of vegetation is now behind us and the 1 liter pots are already well rooted. They will now be repotted in their final pots in the 2nd week. Everything is still going according to plan and now all the plants will move into their final tent.

Couple days after the big defoliation at the end of week 2 flowering and all is looking good. Wasn’t sure if I took too much but it seems to be exploding still and I’m still tucking a bit but mostly We are letting them come up a bit above the screen to start forming our canopy. Looks a bit uneven now but all bud sites are exposed within 10 inches of the canopy and everything is being kept clear as possible. At the end of the third week she slowed down stretching and we did one last light defoliation. Well that’s it for this week, all caught up! See you next week! Cheers 💨

I had originally planted 2 purple kush and 2 fucking incredible autoflower seeds by crop king seeds. 1 purple kush never sprouted. So I planted in its place a white widow.

Wish the buds would have got a little bigger but feel like that’s particularly my fault for a short Veg but overall I am blow away by the outcome for all the seeds to just be random bag seeds! 2 of the plants are drying now 3rd one will be cut tomorrow & the other 2 got probably 2 more weeks! Will do a taste & smoke report and also give a weight as soon as they dry & cure a little bit but honestly couldn’t be happier with my first grow! Thanks for all the support & help along the way & happy growing friends!🤙🏼✌️🏼🌱 Update on 1st plant - dry weight 42g, still smelled pretty Earthy when I put it in the jar but the smell is definitely coming out now, extremely sticky & frosty buds❄️: 1:🏼🙏🏼 Update - plant 2 Dry weight was 40 grams! Extremely happy with the out come this is honestly some of the best bud I have ever smoked! Amazing to me this came from a random bag seed, it has a very citrusy flavor, smells & smokes amazing! Honestly a 10/10 in my book, wish I could knew what strain this was so I could grow it again!😫❄️✌️🏼🌱 Update - plant 3 Dry weight 34g, smells & look phenomenal, the buds are much smaller & had the smallest yield so far but this is by far the best smelling so far! Will have a smoke update on this one soon, stay tuned friends & happy growing!✌️🏼🌱 Update - plant 5 dry weight was 52g it dried a little faster than plant 4 which I will probably jar tomorrow! Will update again with a smoke report soon, this plant brought my total so far up to 168 off 4 plants👍🏼 Thanks for following friends & happy growing! Also the butter I made from the trim was 🔥🔥

great bud

Microrrizas and trichodermas

DAY 21 F: Hi all. Another productive week for the fast buds jungle and the #Fc3000 . The room is full of limbs , leaves and chunky stalks all rounded off with sexy little budlets dancing in the wind for me every time I open the tent . Makes me feel like Hugh Heffner !!!. All of the plants have finished their stretch totally now and a huge surprise has been the midget Mexican airline now being the same height as her sister. I expected her to stay smaller due to the past growing period ect.. but she has somehow hit the same height now. Her buds are not as advanced as the #2 M.a but time should change that too. #1 is forming some very nice looking open flowers now with bundles of fresh pistils to them too. Both of the six Shooter are looking productive in their different set ups. The #1 has reached around 2ft and has some very nice sites setting up now. #2 has been more spread horizontally and is a long distance from the light too. With the canopy height being dictated by the huge Strawberry Pie girls , I felt it would be a good way to see how far away the light can help develop buds rather than supercrop all the big girls for one squat lady. So far the amount of bud sites is promising and it does look as though they are getting enough to develop. Both of the Strawberry pie have really hit their peak with at least 2.5ft tops. Buds are for.ing nicely and the sides are also well developed and in good positions for their own light grabs. It does give hope of some bigger buds than the long node lengths would suggest. Let's see in a few weeks shall we. Lol They had a top dress of charge and life-cycle too to help boost the flowering stage a little. Soil is performing as expected and the watering is going well so far with no excesses either way . Until next time growmies , be safe and well.

5/8 Watered both with plain PH'd water yesterday. Both of the plants are sucking up leaves. Trichomes are only really looking amber on the brown leaves, but otherwise milky. 5/10 Decided that these brown-leaved buds on Trainwreck were ready, so I tried a little bro-science and watered an hour before harvesting. Noticed there were some really nice green young buds intertwined, so I did my best to trim around to leave them for another week or so. No weight measurements yet, will wait till after trimming and before curing.