Les branches de Purple shine sont assez épaisse même un peu trop, le LST est vraiment galère à faire pour l'instant je vais encore attendre un peu qu'elle se développe plus et j'envisage peu être de supercropped les 4 branches principal une fois plus développé afin de former la base(a voir les prochain jours 🤔) Le 1/05 rempotage de Purple Shine, elle a bien colonisé son air pot 1l passage en 4L géotextile dans un supersoil composé de (lombricompost,guano verre, sang et corne de boeuf sèché, phosphate naturel, zéolite, sel Epsom+ mycorhizines) et terreau covercrop Le 3/5 début du LST , pose de clip lst pour former les 4 branches principal, petit accident lors de la pose des clips un apex c'est bien cassé et ne tien que sur 1mm. Je fait une tentative pour essayer de le sauver mais je doute de résultat 😥. Le 4/5 perte de l'apex accidenté 😮‍💨😥 ce matin la branche avait les feuilles flétrie et la tige recroqueviller, fini pour elle le sauvetage a été un échec😥. Le 5/5 on se relève de cette déception et envisage quelques changements dans le programme pour que cette connerie deviennent profitable😉. Nouvelle taille des apex, on passe à 6 pousse maintenant je laisse un temps de repos à purple shine avant une nouvelle taille je prévoyais 8 apex et au final j'en aurai 12😉🔥. PS: même s'il t'arrive une couille, baisse pas les bras et relève toi, arrange toi pour que cette galère te soit profitable😉🔥

This lady ended up a little small but she looks very good and healthy,no problems so far,let's see how she performs, I'm loving this strain so far.

Another good week, stretch is full on and probably another week or 2. They all got a topdress with compost and wormicompost, insectfrass, basalt, kelp, epsom, and seed meal to keep the worms happy. All in small doses... less is more :-)

Bella

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Gorilla Glue has been doing ok even though I was not able to care for her a few days. She is growing good under the G3000 light from Spider Farmer. I am still battling a magnesium deficiency, but from ph and improper care. She should be good to go now. Thank you Spider Farmer, and Amsterdam Marijuana Seeds 🤜🤛🌱🌱🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash

Well not bad without any care they still end up nice but foxtail ..

Watch that you don’t over water them! They havnt started to really drink yet. Be patient. Also don’t follow the spider farmer led chart here. Keep the sf2000 at 18 inches like with the water they aren’t ready for the juice!

Day 43 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. Patience is the key always. Also removed some burned leaves from all ladies. Edit (Day 47) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only DsD drank pure water because of burns. NL stopped also vertical growth, started to fatten her buts. :D Her main cola will be huge.

New week for the 7 strain 11 plants grow Everything is going great some little things here and there but nothing to be worrying about so i am happy how it goes one plant had balls and couple have some droopy leaves on them but have feeling my temp is way to low in darkness 16/3/22 I always show the good the bad and the ugly made couple mistakes wiles training but luckily these plants are so strong give some support and the branch that broke will fixes here self 💪🏻 Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Th kids are looking good. I flushed the 3 gal pots I just had a feeling something was off and I decided to check the run off. It was at 3200 - 3600 ppm. Wu-Tang hoe!! Gaga! So I corrected it and brought it down to 1000. I’m flipping this Saturday at midnight and the will wake up on Christmas Day at noon. I called into the Heavy T grow show to ask about the ppm issue and got some good info. I also got hooked up with some mission fertilizer, smart pots and hydroguard. Then the head grower from a local dispensary was on the show and told me to roll through and he hooked me up with 5 boxes of mills Nutrients and 3 clones. 1- Martian Candy 1- Sherbet Of fire #3 1- future x Cookie Crisp cross, the second 2 are crosses the homie with s working on. So now m pretty stocked to be running those. I might have to get another light. I was only planning on running 3 plants with 2-300w led lights. Now I have 6 plants. I’m going to throw them straight to flower with the others. I don’t have another tent to veg them in. So I’m going to put them in 1 gal pots and see how they do like that. I watered the clones yesterday with Mills Start-R and the future x cc and sherbet on fire are looking way better now. They are praying. But the Martian Candy is still a lil droopy. I foilar fed with the Mills Vitalize on Saturday morning 1 hour before lights on. I’m going to feed them with the bloom ultra yellow bottle while they sleep for 36 hours. It supposed to force them into flower and it is supposed to make a flowers female flowers. This shot is expensive though. I got turned onto it form the homie and he swears by it. It could cause early finish too. I found it in Carson at a hydro shop for $30 a liter. Usually $75 a bottle. They are liquidating because nobody buys it anymore because of the price. It’s only used for the first 2 weeks of flower and after that you don’t use anymore so it’s expensive considering you only use 2 weeks. But I scored. I’m going to switch my nutes during flower and use the Mills to see how that works. Its also a very expensive line. But I got blessed so I’m goIng to see what all the hype is. Damn this is crazy I’m excited to see my first plants bud! I want to wish everyone a merry Christmas and happy new year.

The two main events this week: Defoliation and training. The ladies seem to take it well. As you could see last week I got a deficiency in one of them. It turned out to be a Phosphorus def. Apparently the nuts I use have a rather low amount of Phosphorus... I had the same problem in my last grow(dark leaves, slow bud development)... unfortunately that time I didn't get what was happening. So I started giving them "Bud Explosion" now, 2ml/l, which basically contains a mix of Phosphorus and Potassium, and the improvement was almost instantly noticeable! I'm thinking they get 4-5 more days to recover in veg. then I flip them.

Tiene unos cogollos bien duros y compactos,son muy pegajosos y los pistilos son de un naranja radioactivo,tiene un aroma muy rico como terroso y mentolado

Throughout the week, I give compost tea, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@

meh

11.02.: So far everything is well under control. temperature and humidity are well adjusted. We will see how it goes on. The gold juice is intended as food (sugar) for the microorganisms. Light intensity: 25% —————————————————————— 12.02.: Day 9! water values ​​checked: RO Water Temp. 18,1 degrees 015 ppm 5,7 PH water value After adding 0,5ml/1L CalMag (BioBizz) Temp. 18,1 degrees 054 ppm 6,3 PH fertilized with BioGrow for the first time. (3g/1L substrate) —————————————————————— 15.02.: Day 12! Today I drop the humidifier from 85% to 80% The plants now use the water relatively quickly. now has to water every two days. Before watering the pots had 125g and after watering 180g. Poured with RO water and 0.3ml/1L CalMag values: water: 028 ppm 19 degrees drain: 765 ppm 19 degrees The roots looking perfect! Soon the little ladies will be in their 19 liter fabric pots! —————————————————————— 16.02.: Day 13! Today I changed the light intensity to 37%. Everythig looking great. —————————————————————— 17.02.: Day 14! Today I repotted the ladies into their 19 liter fabric pots. Composition per pot: - 19 liters of BioBizz light mix - 55g BioGrow - Greenhouse Feeding - The roots were powdered with Rootmax and Bactrex. - 3 liters RO water (017ppm) (15% of pot) - 0.9ml Calmag - BioBizz (029ppm) - 3g BioEnhancer - GH Feeding (154ppm) Light intensity increased to 42% Room temperature 25 degrees 75% humidity ——————————————————————

Harvest pics. In the glass jar is pineapple gummy. Same breeder as the lilt. I forgot that I popped one of these seeds it was the last from the pack. The hanging dry pic is the rest of the pineapple gummy it was close to the gavita light and was very hairy. The big top next to it is the top of the lilt plant grown under the mars hydro 150w led light. When the feds choped it all down the lilt was given an extra week than the top which was cut off im absolutely pissed about that I didnt use a carbon filter I think the smell got a bit too strong will be back soon live and learn

Starting!!