Likes
Comments
Share
@RoyColt
Follow
Day50 26/05 Changed new reservoir 8L total 2,20 ms.Continue Def. and Lst. Day51 27/05 add 2L ro water with 4ml cal mag. Continue Def. and Lst. Day52 28/05 add 2L (1L only ro water and 1L with nutrients.). Continue Def. and Lst. Day53 29/05 add 1L only ro water. Day54 30/05 add 2L ro water with nutrients.. Continue Def. and Lst. Day55 31/05 add 2L ro water with 4ml cal mag.
Likes
18
Share
@BLAZED
Follow
Week 18 (26-5 to 1-6) 26-5 Temps: 19.3 to 24.2 degrees Humidity: 36% to 63% Watering: 1000 ml. EC: 1.3 27-5 Temps: 19.4 to 26.9 degrees Humidity: 44% to 62% Watering: 1000 ml. EC: 0.3 28-5 Temps: 20.2 to 27.3 degrees Humidity: 40% to 64% 29-5 Temps: 20.2 to 27.2 degrees Humidity: 47% to 63% Watering: 1000 ml. EC: 0.3 30-5 Temps: 21.3 to 27.2 degrees Humidity: 50% to 67% Watering: 1000 ml. EC: 0.3 Light set from 90% to 70% strength. 31-5 Temps: 21.5 to 25.8 degrees Humidity: 49% to 66% Watering: 1000 ml. EC: 0.0 1-6 Temps: 20.4 to 24.8 degrees Humidity: 40% to 65% Watering: 1000 ml. EC: 0.0
Likes
8
Share
So another week is over. I decided to use h2o2 and enzymes alternating from / days until the end. This time I used enzymes and canna boost. Next time H2o2 again!
Likes
8
Share
Buenas tardes, aquí mi Sour Compassion CBD. La segunda generación y viene a todo ritmo. Al día de la fecha (29/5) lleva 36 días de flora. Una planta muy sana que se recuperó de una gran falta de magnesio por problemas de ph. Es un esqueje de la Sour Compassion CBD que coseché. Las fotos son a lo largo de su crecimiento. Actualmente está nevada y posee un olor a pino increíble. Saludos cannabicos!😎
Likes
5
Share
@Smev1337
Follow
this is the end for this RF3 run with the Strawberry Gorilla strain! been really fun growing it but i need bigger stuff for next time 😎 i'm calling an monster grow 2.0 later this year! 😏👌 happy growing all! 😎✌️💚
Likes
34
Share
Harvest done, plant is drying. 116 days from seed: 51 days veg + 65 days flora
Processing
Likes
17
Share
Watering has jumped up to every 2 days ph 6.3-6.8 with 20% runoff Flower Fuel has been added to AP,GG and ZK watering's. Lights have been lowered to 24-28 inches. White Widow just started flower at end of the week. Still waiting on the Cream Cookie. Doing light Defoliation to expose bud sites to the lights.
Likes
59
Share
perfect views all over but still not ready for harvest, one more week up we go <3 <3< 3 As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life <3<3<3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove 
 With true love comes happiness <3<3<3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3<3<3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3<3<3 Growers Love To you All <3<3<3
Processing
Likes
62
Share
Welcome to the 2018/19 indoor grow season!!! I am starting this diary for all current seedlings and clones I have started. I'll also be doing separate diaries for some strains individually (but not all). So, currently I'm about a week in on average with these seedlings and clones. The Seedsman CBD Cream & Cheese and DinaMed CBD+ were started a few days earlier and started stretching using only the 18w T5 my humidity dome came with. So I set up one of my LED's over the humidity dome instead. So far that seems to be helping the newer seeds from stretching too high. I'm also seeing some burn on some girls, I guess the soil must be too hot. I started to try to flush through with straight ph'ed water, but then I started seeing signs of overwatering (rookie mistake, I know). Now I'm just trying to keep a little water on the bottom tray so it generates some humidity in the dome. There's also a heat mat under the tray I have the heat mat on a timer also, 30 min on/30 min off cycling all day. It seemed to get too hot on 24/7. I'll be transplanting and moving to my 2'x4' tent in about a week. They will live there during veg, then I'll be moving to a 4'x8' tent (not purchased yet) for flower. I'm also planning on adding some COB LED's in the flower tent. Then I'll dedicate my 2x4 tent to mothers, clones and seedlings. Its going to be a little different this season with both photo period and autoflowering strains going at the same time. But I'm looking forward to it! 👍 Stay tuned...
Likes
20
Share
@Blosmk57
Follow
Buds are really swelling and smell has come on strong ! Really shaping up to be nice plants and good looking buds. The trichomes are starting to stack on and hopefully will get better as the buds begin to bulk up here in last few weeks ! But really a beautiful plant and has great structure! Many main colas instead of just a Christmas tree shaped plant with 1 , so far that’s a bonus ! Beginning week 8 and things have come along great. After a slow start I’m really impressed with how these are looking. 1 of the 2 has quite a bit more color starting to appear on some leaves and in the new buds but both are turning into beautiful plants. Not a lot of smell coming from them yet but just starting to notice a few trichomes on some sugar leaves near the highest forming buds. Excited to see how things progress! @blimburm thanks for the genetics! Starting to really get excited about this Grizzly Purple Auto !
Likes
12
Share
@Chucky324
Follow
Hello This is the end of week 2 and the beginning of week 3 of flowering. The day after reporting 2 weeks ago, I couldn't log in and the site was not working right. I got about 30 pictures on the home page then nothing after that. All the other pages I could bring up but there was no content. But all the, adds, worked... It went on for 5 days. I got discouraged and didn't report last week. I think what happened was somehow the operating system I'm on, got blocked from getting the whole web site. I've read on the questions page that some systems worked fine all that time. Got in here and did some LST and sucker branch and some fanleaf removal for better light penetration and air circulation. Things are going well. Saw some thrips damage, so I bought some canopy mites to keep their numbers down. You can see the little jars with bran in them. The canopy mites eat the bran mites while being transported in the packages. Still hoping to harvest around Aug 15 or so. OK. Be Great. Chuck.
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
30
Share
Was such a pleasant harvest from start to finish, no issues at all. A tip for next time would be to have the SCRoG lower as I couldn’t really tuck any node sights this time round, smells absofuckinglutely amazing from 3RD week bloom onwards!
Likes
Comments
Share
The eighth week of flowering has come to an end, and the finish line is finally within sight. This week, I reduced the light intensity to level 7 to simulate the shorter, less intense days of autumn as the plants enter the final stage of their life cycle. Although the breeders estimate a flowering period of nine weeks, all four cultivars appear to be developing slightly behind schedule. Judging by the current trichome development, it's difficult to imagine they will reach the desired 10–20% amber trichomes by the end of next week. Fortunately, all of the plants are progressing at roughly the same pace. While they may be taking a little longer than expected, their synchronized development fits perfectly with my plan to harvest the entire tent at once rather than in stages. Aside from that, the week has been pleasantly uneventful. Environmental conditions remained stable throughout, a welcome change after last week's humidity challenges. Keeping the relative humidity below 60% was no longer a struggle, and on several occasions I was even able to maintain it around 55%, which is about the best my home setup can achieve during the summer months. Visually, the garden is now embracing its autumn colors. The leaves continue to fade from green to yellow as the plants redirect their remaining nutrients toward the flowers. Each day, I remove two or three yellowing leaves from every plant, gradually cleaning up the canopy while allowing as much light and airflow as possible to reach the ripening buds. Water consumption has also begun to decline, another clear indication that the plants are nearing the end of their life cycle. They now require less frequent watering, and I have transitioned to reverse osmosis water mixed with approximately 30% tap water. This gentle flushing period will help the plants use up the remaining nutrients as they make their final push toward maturity.
Likes
16
Share
An Indica-dominant hybrid that’s incredibly easy to grow and very resilient, suited for new and experienced growers who, with not much effort, will be rewarded with impressive 24% THC packed colorful buds with red and pink highlights, accompanied with light orange and white pistils that stand out from afar. Provides a powerful yet not overwhelming high that comes hand in hand with a unique extremely delicious sweet and doughy citrus pine-sol smell. Lemon Pie Auto performs exceptionally well indoors and outdoors, where it’s recommended to grow in bigger pots to let her show her full potential; being able to yield up to 550 gr/m2 in around 8 weeks. The extremely dense and chunky buds will leave you amazed by the excessive resin production that makes it look like they are completely buried in it, perfect for people looking for potency and great taste while having a balanced cerebral and body effect that will please even the more experienced growers. Also recommended for extractors looking for terpenes that will captivate your taste buds. Tech Specs Taste Lemon, Dough, Sweet, Pine THC Up to 24% CBD < 1% Size XL Height 80 – 100 cm Flowering 8 – 9 weeks Genes Sativa 50%/Indica 50% --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
34
Share
Неделя прошла хорошо, перестал давать удобру, листья по немногу начали отсыхать и отпадать по этому провёл небольшую дефуляцию плохих листьев уже, кустик стал красивее и почти набрал полные обороты, соцветия почти все распустились, ждём скорого харва)
Processing
Likes
3
Share
@ZEEMAN
Follow
She defo comming along now, still praying for them heavy sticky buds , hopefully another couple of weeks and I think she will be done, each individual bud side branch has been tied out and other lst applied also gave her a defoliation, all of this has had to have a positive effect overall.