The Grow Awards 2026 🏆
Likes
Comments
Share
Processing
Likes
6
Share
DAY EIGHT It seems to be going well, I think. The temperature and humidity have been right about where I want them; 79 F and 60% plus or minus a few. I added a DIY LED I made from the small bar LEDs I had initially used for germination. Not very pretty but any added wattage is appreciated. This will only be temporary. I also added a bit of coco coir to each cup topped with ocean forest. DAY NINE Plants look healthy, a little droopy but it was after dark period. Gave them some water. No real changes. DAY TEN Plants are looking good. I did not water them today because the soil seemed okay. Humidity and temp are stable. I posted a video to show off my ghetto lighting system. DAY ELEVEN No adverse changes noted. Watered them well after their dark period. Temperature has been averaging about 81 F with 65% humidity. I haven’t changed the setting of the fans, lighting, or humidifier. DAY TWELVE No changes made. I gave them a light watering and lightly compacted soil a bit. I plan on transferring them to 5 gallon pots soon. DAY THIRTEEN I gave them 24 hours of light (not by design) before I transplanted the two girls from their solo cups around 3 o’clock this afternoon. I decided to put them each into 5 gallon fabric pots with a base of Fox Farm Ocean Forest. I gently cut the bottom rim off the solo cup using pruning scissors, then cut straight up the side. I was able to pull the cup apart without disturbing the roots and soil hardly at all. I did not loosen the soil at this time, as I was afraid to touch the roots at all. I had a small spray bottle with spring water and two tbsp of Dynomyco dissolved in it, which I sprayed half the contents onto each of the root balls. I also sprinkled a bit into the soil and mixed. I basically have the bottom third of my 5 gallon fabric pots a pretty even mix of Fox Farm Ocean Forest, vermiculite, perlite, and coco coir. Then the rest was 90%+ FFOF soil. I put a bit of vermiculite on top of the soil around the seedling to give it some support. As far as watering, I gave the soil a bit of spring water when the pot was halfway full, enough to dampen it. I then watered it again once the plant was transferred a pretty good amount, probably 16 ounces or so of spring water with a bit of aloe in it. Now they will sit in the dark for 4 hours, and I will keep the temperature and humidity around 78F and 65% give it take a bit. DAY FOURTEEN They don’t look they are dying; I guess that’s a good sign. They seem okay in their final pots. Temperature slowly dropped to 70 F for a couple hours when I was out earlier. It’s back to its stable 79ish. No adverse findings.
Likes
92
Share
Week 3: TrolMaster Chronicles – Transplanting, Growing Strong, and Thriving in PRO-MIX HP 🌱✨ Hey Grow Fam! Another exciting week has flown by in the grow room, and I’m thrilled with the progress! We kicked off Week 3 with our first set of transplants. The Gorilla Melon was transplanted at the end of the week, while the Papaya Zoap is still patiently waiting for its turn to shine. Each plant that’s been transplanted is now comfortably settled in 15-liter Autopots, filled with PRO-MIX HP BIOFUNGICIDE + MYCORRHIZAE, and wow, I’m loving this mix! 🌱 Why PRO-MIX HP is a Game-Changer For those of you unfamiliar with PRO-MIX HP, let’s take a closer look. This soil provides superior drainage and aeration, thanks to its high porosity. The addition of fibrous peat moss and coarse perlite creates an ideal environment for water flexibility. It’s been perfect for the girls as they transition into their final homes. Plus, the biofungicide and mycorrhizae are doing wonders for root development, giving them all the support they need for vigorous growth. The plants are showing off a beautiful, vibrant green, each with its own unique characteristics—no two plants are the same, and I love that! 🌡️ Environment Update: Temps, RH, and More Let’s talk about the conditions the girls are thriving in! We’re sitting at: • Temperature: 26.7°C • Relative Humidity: 62.9% • VPD: 1.30 (I know it’s a bit high, but they’re handling it like champs) • CO2: 800 ppm • pH: 6.18 • TDS: 215 ppm • Solution Temperature: 23.2°C To make things even more efficient, I’ve adjusted the light height, keeping the PPFD around 360 to 400 to save on energy. These beauties are still soaking in the light perfectly, and I couldn’t be happier with how they’re responding. 💧 Watering and Feeding At this stage, the plants are thriving with just enough nutrients to keep them happy. I’ve kept things simple with a balanced solution, ensuring everything stays within the perfect range. The PRO-MIX HP, with its mycorrhizal fungi, is really helping with nutrient uptake and boosting overall health. It’s amazing to see how quickly they’ve adapted! 🌟 Transplants Complete – Progress Feels Incredible! I’m super excited with how everything is shaping up! Most of the transplants went smoothly, and the growth we’re seeing is just amazing. The Papaya Zoap is still waiting for its final move, but it’s growing strong, getting ready for the next step. It’s an honor to work with these genetics—they’re each unique, yet all thriving in their own way. 🌱💚 🌍 Shoutouts and What’s Coming Next I couldn’t do this without the support of my amazing sponsors and all of you, Grow Fam! A huge shoutout to TrolMaster and Aptus Holland for their top-notch gear and nutrients, and of course, to all my followers—whether you’ve been here from the start or are new to the journey, thank you for the love and support! 💚🙏 Don’t forget to check out my Instagram and YouTube, where the Seed to Harvest Series just kicked off! I’m going deep into all the gear, techniques, and day-to-day grow updates you see here. Exclusive content and more are waiting for you on those platforms, so come by and join the fun! Growers Love to everyone, and here’s to another epic week of growth! 💚🌱 Let’s keep pushing the limits and making magic happen. • Nutrition: @aptusholland @aptus_world @aptus_es @aptusbrasil @aptus_thailand @aptus_portugal @aptususa_official @aptusplanttechnz @aptusplanttechaus • Controls: @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro • Soil: @promix_growers_eur @promix_cannabis @promixmitch P.S. Let’s talk about these new Model One LED bars I’m running. 🌿💡 They’re not just any lights—these are full-spectrum beasts designed to give my plants exactly what they need at every stage of growth. The real magic, though? The dimming feature. With just a quick adjustment, I can dial down the intensity without sacrificing the quality of the light. This means I’m saving on energy costs while still delivering top-tier PAR and maintaining a balanced spectrum. It’s not just about blasting plants with light; it’s about giving them the right light at the right time. By fine-tuning the PPFD (Photosynthetic Photon Flux Density), I’m hitting that sweet spot where the plants thrive, and I don’t have to run the LEDs at full power. So, while I save a bit on electricity, my plants still get the perfect environment to reach their full potential. 🌱✨ This level of control lets me optimize the growth, and trust me, my plants are loving it—just another reason I’m thrilled with the Model One setup. 💚💚💚 Growers Love everyone 💚💚💚
Likes
1
Share
Now that she is standing in a tent, she develops much better. Let's see what she will do in flower mode
Likes
9
Share
@Wenz004
Follow
experiment explanation see week 1 this week gelato Auto made the grow in the tent...the others (tropicanas in living soils) have many problems. Gelato Auto in royal mix from plagron and the following nutrients... Plagron sugar royal...power buds...alga grow and aptus all purpose...aptus regulator and aptus calmag booster and once a week some magig minerals from TA a bit powder around tge plant stem
Likes
30
Share
I have been using LST in the form of a fan on medium speed to try and strengthen the main stalk of the plant as well as planter rotation to strengthen the main stalk for tie down LST. So far I've been impressed with the rate of growth and the overall experiment. For what it's worth, the growth wth is very very similar to a hydroponics growth. I'm sure as the experiment continues I'll notice some big differences. It does appear to have either a minor potassium deficiency or a little too much nitrogen. Will monitor and update as needed. The above signs may have been trying to indicate the main stalk was weakening from too much weight from vertical grow rate. This would ultimately lead to a fractured stalk. Is this what happened or is it a fungus or disease problem? Plant C sprouted within 48hrs and will be 6 days behind Plant A. End goal of harvest is still 360g from the two plants combined. Both plants are looking very happy regardless of the toxicity or deficiency. Strong strain nonetheless.
Likes
5
Share
@Naujas
Follow
I came back after vacation, the girl is ready for cutting, the rainy weather has started, so there is a threat of rot, you can say I managed to find just a few small pits in time and removed them and threw them away, the big and stiff flowers look fantastic:) but after a long trip I was tired, so I didn't take quality photos :( no everything else, I am very satisfied with the result I got:) its smell already lets me know that it will be good:) a lot of sugar leaves from which I will make bubble hash:) I will update the weight when it dries.
Likes
9
Share
@Ribemarti
Follow
Las plantas ya tienen echo el lavado de raizes y ahora solo estoy regando con agua, a 400 ms y ph 6.5 estan repletas de cogollos y duros como piedras de arriba abajo,
Likes
8
Share
@Eluri
Follow
Harvest is coming and the plant is fully ready to it. Trichomes are cloudy and the buds are big and dense. The last 48 hours, plant will be in darkness to rise the number of terpenes and improve smell and flavour and I will not water it anymore. I cutted off the bigger leaves in order to make the plant know that only last hour left. I'm really proud of her and this was a really nice experience. I will repeat it someday, be sure about that.
Likes
9
Share
@GrowerGaz
Follow
Change the water tds now 400ppm , had to adjust the ph as it shot up quite fast 24 hours after the water change . So far so good , dare I say nice healthy roots. Hopefully it will take off this week
Likes
5
Share
Well mother fu**** woke up one morning and saw that one of the NANAZ got something that looks like nute burn (keep in mind I feed them all the same exact thing!) what happened to that plant should of happened to the others but what a pain in the ass.. it is completely brown now and I think I’m chopping it no room for uglies in the tent!
Likes
181
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom 🌱GARDEN OF GREEN SEEDS ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
Comments
Share
La alegria que se palpita es mucha! Siempre soñe con tener cogollos oscuros y esta es la primera vez! Es notable la diferencia entre la planta fertilizada con namaste y la de feeding, aunque con este solo utilize el Grow y el Booster. Esta ultima tiene un aroma mas plano, sutil, pero gana en volumen. En cambio con la que utilize namaste destaca mas la precencia de ese aroma como a frutos del bosque, dulce y terroso. A comienzos de pre flora aparecieron unos gusanos verdes que se multiplican muy rápido. La mayoria la elimine a mano, pero lo ideal es utilizar jabon potasico + Aceite de neem para eliminarlos inmediatamente.
Likes
18
Share
Likes
30
Share
@SAC87
Follow
Day 14 Flower: Hey Growers. This week has gone pretty well. I am trying to dial in the Vipar Spectra XS2000 where the plants are happy and have reaching leaves. I have it set to 22-24” above the canopy and 95% and that seems to be where they’re happy for now. There are buds starting to form up and some stretch happening. This next week I will be doing a leaf strip as this pheno is super leafy, I just don’t want to stunt that upward stretch right now. They are much happier with water every other day and may need to increase to daily. As a combat to possible fungus gnats or soil born pests, I use h202 when doing my plain watering. They also seem to really like the “liquid” oxygen that is a byproduct of its use. If it’s could get another 3-4” of stacked stretch I’d be really pleased, but whatever they do is up to them. All I can do is try to make them happy and in turn they will do the same for me later. 👍🏻👍🏻 Happy Growing 🌱✌️🇺🇦
Likes
1
Share
@Dabcik
Follow
Molto resinosa! Profilo terpenico agrumato con sentori di arancia/mandarino dolcì e retrogusto di frutti di bosco
Likes
39
Share
In realtà ho coltivato 2 semi di questa pianta una l'ho raccolta e seccata mentre un altra è ancora in flush e verrà raccolta tra 5-6 giorni. I fenotipi sono quasi identici e predilige un odore di gas e og! L'effetto è devastante molto narcotica e a breve pubblichero qualche foto di qualche estrazione a freddo! Spero che piacciano a qualcuno i miei lavori e che qualcuno di voi si possa ispirare a tutto questo. Ringrazio ogni singola persona che è passata di qui a lasciare il suo like o commento e ricordo a tutti voi che potete trovarmi anche su Instagram 😘
Likes
12
Share
Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Coco Jambo: Con una composición genética 60% Sativa y 40% Indica, Coco Jambo es tu billete dorado a un verano sin fin, ofreciéndote una escapada a un mundo donde el sol nunca se pone en tu felicidad. Con unos niveles de THC que oscilan entre un relajante 30% y un estimulante 34%, Coco Jambo es un faro de euforia que guía a sus usuarios en un viaje a través de olas de serenidad y vibrante alegría. Su aroma es una celebración de los sentidos; imagina el momento de euforia al abrir un coco y descubrir que rebosa de las frutas tropicales más suculentas. 🌻🚀 Consigue aqui tus semillas: https://anesiaseeds.com/es/product/coco-jambo/ 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 10: Última semana antes del corte final, los cogollos están bien prensados y cargados de resina de un color muy lechoso, solo falta que se tornen algunos tricomas más en ámbar. MarsHydro y XpertNutrients han hecho de nuevo un gran trabajo 💪😍
Likes
6
Share
@KivzBudz
Follow
Der Stretch geht langsam so richtig los! Sie machen Meter und sind happy :) Am Samstag wurde lollipopping betrieben.