growing chem pie was amazing from start to finish, he made beautiful buds covered in resin. Every day it was wonderful to go and see how it blooms. during cultivation I came across two completely different phenotypes. One had rather more open but very firm buds, but the other was more like a crossbow and also firm buds. During drying, a little mold appeared on one of the bud, but otherwise everything is fine. after a month of curing, the taste of the smoke was very pronounced.

43 DÍAS DESDE SU GERMINACIÓN.

Something tried to nibble on Plant B, however there are no signs of pests and no further damage anywhere else (I have 6 other plants in the garden too). Plant A has already begun to develop stipules on its first set of true leaves too! Had their first feed on day 14 (2ml Fish Mix + 0.1ml Mono-silicic Acid), and were fed again on day 16 (2ml Fish Mix, 2ml Bio-Grow, 2ml Bio-Bloom, 0.1ml Mono-Silicic Acid).

Hi all, Nothing much to say. Have a look. She started to stretch quite nicely and keeps thriving. All good, no complaints.. See you next week..

This week I tried to let them go, only did some gnat hunting with the vacuum to keep populations down. Sunshine found a great way to hold the plant down with some thrift store Christmas light fixtures. At the end of this week, I tied the remaining upward stalks down and away. The final bits of training before we can hopefully go towards flowering coming week. I did some foliar feeding also to help the soil dry out a bit, also to fight the gnats. Maybe overdid it a bit with a few yellow points on the leaves. On to flowering!!

Hey everyone! Week 2 is going well for these ladies :) Day09: The two Auto Somango Glue seem to be happy, healthy and are growing strong. The two Auto Afghan Skunk however, showed a weird claw-like curl on their second set of leaves. They're still growing and I don't see any kind of discoloration on those leaves, though. I've been watering sparingly, 0.5L every 48h approximately, so I'm thinking they may be stressing due to too much light...? I brought the light inensity down to 75% and raised it 10cm yesterday to see what happens. The Auto Afghan Skunk 1 is already showing signs of improvement. Hopefully the other one will too - fingers crossed! I'm just guessing honestly 😏 Any suggestions would be welcome and highly appreciated! ---- Day 14: I've definitely overwatered these girls. I was following my instinct based on my experience using HID lights, which generate a lot more heat and cause for 1. plants drinking more and 2. faster water evaporation. Of course LEDs don't genrate as much heat and I need to adjust my watering habits...! 😏 Should have payed closer attention, but hey, you live you learn right? Luckily growth isn't stunted and the two Somango Glue keep growing strong :) The two Afghan Skunk seem to be suffering a bit more from overwatering, but they're showing signs of recovery so I'm confident they'll bounce back 💪 The girls got a 200ml watering on day 10 and didn't get any water since then. Waiting for the pots to dry out some more before next watering. I turned off the fan inside the tent so the girls can have a little more heat too. Hoping that will help dry out the soil faster This was it for week 2! Take care and have a great week Thanks for looking 👊

hola colegas ,7 semanas de floracion dese el cambio a 12/12, seguimos con el engorde de mis nenas ,hasta el momento siguen bien y hambrientas

I just cleaned the roots and I'm waiting until it's dry to chop her down, I love the smell and the compact nuggets that she has,it's just a very nice genetic to grow.

it was amazing to see these plants figuring a way out to sirvive after all of that stress they get from a bird attack(the m-f****** ate a piece of leaf from one plant and the most from the other

After 21 days in turbo cloner I transplanted 4 Sweet seeds Green Poison into 1 gallon plastic pots filled with Cana coco. Few days later I transplanted another 4 clones into DWC! Stay tuned! Coco feed at 700ppm Dwc feed at 480ppm

At the and of the week all lST supporting thenfs were removed: canopy is formed and all the stems are hardened. The progress is very slow, but I like how the plant looks, it seems to be healthy and has more flowering points than I've seen on any autos I grew before. I also adjusted the fertilizers ratios to get more optimal for flowering stage and added pH-down to improve the solution assimilation.

29 days since my seed sprouted a little girl🌱 Fourth week of growing my Purplematic CBD Auto ⚕️💚💜 Nutrients: Nutrients - transition to flower: Plagron Alga Bloom is an organic flower fertilizer for growing in soil. The fertilizer is algae-based and contains amino acids, proteins and a balanced ratio of phosphorus and potassium 🌺 ------------------------------------------------------------------------------------ Plagron Green Sensation is a flower booster. Green Sensation is a 4-in-1 product, so you don't need to add additional fertilizers. Suitable for all types of substrates and systems 💚💜💚 ------------------------------------------------------------------------------------------------------------------ Bud Candy is a carbohydrate supplement from Advanced Nutrients that maximizes the growth and aroma of flowers. It supports strong root activity by providing food for beneficial microorganisms. ------------------------------------------------------------------------------------------------------------------ BioBizz Calmag is a 100% organic, but also vegan fertilizer with BIO certification. Biobizz Calmag was designed for professional growers and home growers who need an extra dose of calcium and magnesium. It contains added humic acid 💩☘️- I only apply it once a week.--------------------------------------------- Biobizz Bio pH-/ Biobizz Bio pH+ is a 100% natural and vegan pH regulator. Suitable for all types of substrates and crops. For use in growth and flowering. 💩🍋🌱 ---------------------------------------------------- PRO-MIX CONNECT MYCORRHIZAL POWDER - for substrate General: Purplematic CBD Auto ⚕️💚💜 The girl is already in full bloom 🌺🏵️, I feel very sorry for this girl, her leaves are curling more and more. It looks almost horrible. On the other hand, I was afraid that her disease would also affect the flowers, but fortunately that did not happen. The buds are dark purple, the pompoms full of hairs are getting bigger. I think the harvest will be quite satisfactory, considering the problems with the leaves ☘️🌱 I use the new pH and EC meter Aqua Master Tools P110 PRO, the measurement is fast and accurate 👌 So far I have managed to keep the pH and EC as they should be. Although my EC has jumped a little more now, I diluted the watering so that the EC drops. I use Biobizz Bio +/- to correct it. The excellent mycorrhizal powder PRO-MIX Connect to support the roots certainly works very well. All the girls have been very strong and stable from an early age 💚🌿🌲 Training: I did 2x defoliation and 2x LST to all the plants in the tent this week. It didn't work out very well with Purplematic, the basic LST was enough and I cut the leaves and they fell off, they don't have many and they are sick, however the plant needs them for photosynthesis 🍃

Smell is increasing, buds are filling in nicely and very sticky too! Compared to the last grow, theses plants are much healthier at this point.

And we’re off! 😸👏 So I’ve kinda been coerced into growing this Fastbuds Frostbanger Auto 🤷‍♂️😸 For the last few months me and a few others on here have been chatting about all growing the same strain and comparing how we do along the way. Sounded fun so we agreed on a date. Thankfully the one seed I bought has Germinated so that’s a relief 😅😸. It’ll be a squeeze trying to fit her in my veg tent in her final pot at present, so I’ll probably start her in a small pot and pot her up into something bigger at a later date 🤷‍♂️ These are the other guys who are growing along with me, all nice lads 💁‍♂️ check them out. - Fatnastyz - Valiotoro - Spike-GreenGrower I plan on giving her dechlorinated tap water for the first week, then I’ll start her on a proper nutrient feed. Happy with how everything looks, until next time 🌱

**Encontrarás la traducción a español al final de la descripción** From/Desde: 10/05/19 || To/Hasta: 16/05/19 From day/Desde día: 78 || To day/Hasta día: 84 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- 5 - HomeMade Organic & Cheap CO2 generator (more info in week summary) 9, 10, 11 & 12: The bud on the right is a Gorilla one, the buds in the left or/and in the middle are Money Maker ones. 15 - Same Gorilla plant buds, one affected by CO2 in the roots and the other not. -----WEEK SUMMARY----- The smell is more sweet and intense every day, friends that came home turned them eyes into crystals when they see this little babys. The size isn't awesome, but the high ammount of buds full of crystals plus the strong sweet aroma makes them awesome. Buds are growing and fattenning very very well. This week i added a boost of HomeMade CO2, i never measured the results of this invention so i can't give CO2 measurements. This method is widely used in home aquariums and there is where it comes from. For those interested i'm going to write here more detailed instructions. The 4 liters i've made will last for about 2 weeks. ---NEEDINGS--- - 250 ml Bottle - 6~10 l Bottle - 400 g Sugar / l water - 1 Envelope of organic baker's yeast / l water (CHEMICAL WILL NOT WORK) - 3 mid plastic tubes 40~50 cm - 1 short plastic tube 5~6 cm - 4 tube adapters - Hot glue to seal adapters The process of creating CO2 is simple, mix water, organic yeast and sugar in a bottle, and the sugar will free CO2 in the process of fermenting to alcohol due to the yeast. 1. Make a hole in the center of the big bottle cap, insert an adapter and secure it with hot glue 2. Make 3 holes in the small bottle cap and glue the other 3 adapters 3. Link both caps with one of the mid tubes and insert the other tubes on free adapters 4. Insert a short tube in the bottom of the small cap in the adapter that came from the big cap 5. Watch the Video!! -----WATERING CALENDAR----- Plants are beginning to drain the pots a bit faster so from now on i will raise the water ammount on each watering day 0.25 l. 11/05/19 - 1,5 l with All week nutrients -(Nirvana & Blombastic) also Big Bud half dosed @ PH6.4 & 2 E.C. 14/05/19 - 1,5 l with Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym & Blombastic @ PH6.4 & 1.5 E.C. *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- 5: Generador de CO2 casero, barato y orgánico (más info en el sumario semanal) 9, 10, 11 & 12: El cogollo que sale a la derecha es de una Gorila, el de la izquierda y/o el de en medio son de una Money Maker 15: Dos cogollos de la misma planta, uno afectado por CO2 en las raíces y el otro no -----SUMARIO SEMANAL----- El olor es más dulce e intenso día a día, los amigos que vienen a casa a verlas se quedan ojipláticos al verlas. El tamaño no es una maravilla, pero la gran cantidad de cogollos llenos de cristales añadido al aroma que entra por las fosas nasales las hacen increíbles. Los cogollos crecen y engordan de maravilla. Esta semana he añadido un boost de CO2 casero, nunca he hecho mediciones de los resultados por lo que no puedo darlas. Este método es ampliamente usado en peceras caseras y de ahí saqué la idea. Para aquellos interesados dejo aquí instrucciones más detalladas. Con los 4 litros de agua que he preparado yo da para unas 2 semanas. ---NECESITAMOS--- - Botella de 250 ml - Botella de 5 a 10 litros - 400 g de azúcar por litro de agua - 1 sobre de levadura de postre orgánica (LA QUÍMICA NO FUNCIONARÁ) - 3 tubos de plástico de tamaño medio 40~50 cm - 1 tubo de plástico de tamaño pequeño 5~6 cm - 4 adaptadores para los tubos - Cola caliente para pegar y sellar los adaptadores El proceso de generar CO2 es simple, mezcla agua, levadura orgánica y azúcar en una botella, y el azúcar liberará CO2 en el proceso de fermentación a alcohol. 1. Haz un agujero en la tapa de la botella grande, inserta un adaptador y séllalo con cola caliente 2. Haz 3 agujeros en el tapón pequeño y haz lo mismo con los otros 3 adaptadores 3. Conecta los 2 tapones con uno de los tubos y conecta los otros 2 tubos a los adaptadores restantes 4. Conecta el tubo pequeño en la parte libre del adaptador del tapón pequeño que viene del tapón grande 5. Mira el vídeo -----CALENDARIO DE RIEGO----- Las platas comienzan a secar los tiestos un poco más rápido, asi que de ahora en adelante incrementaré 250 ml de agua adicionales en cada riego. 11/05/19 - 1,5 l con todos los nutrientes semanales -(Nirvana & Blombastic) BigBud mitad de dosis @ PH6,4 & 2 E.C. 14/05/19 - 1,5 l con Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym y Blombastic @ PH6,4 & 1,5 E.C.

The three plants are doing well. Fat Banana with topping has recovered strongly and continues to grow. Fat Banana without topping is unstoppable. A little defoliation applied. Northern Light is now a bonsai! :D Northern Light - Bloom status - 24/25 cm 08/17 * 08/21 30 cm * 08/24 36,5 cm * 08/27 40 cm Fat Banana with Topping - Bloom status: 15 cm 08/17 * 08/21 - 22 cm * 08/24 27,5 cm * 08/27 32 cm Fat Banana no topping Bloom status: 20 cm 08/17 * 08/21 - 30 cm * 08/24 - 35,5 cm (small defoliation) * 08/27 40,5 cm

This week has been slow. Weather has been really bad. Superskunk is now dry and I’ve started the cure. Dry weight came in at 42g so I’m happy with that. I had a little sample tonight and it wasn’t a nice smoke. Snow Ryder shouldn’t be to long now but the weather doesn’t look to good this week. The second super skunk isn’t still going strong. I found a couple of caterpillars on her but not much damage.

Candyman Day 85, Day 35 of flower! We have now hit week 5 of flower and they are starting to look and smell incredible 😍 very sweet but pungent gassy aswell. They are getting fatter by the day now. I think two will be done in 4-5 weeks 🤞🏻 I'm very happy with this brand of seeds 💯