Recommended
Likes
Comments
Share
@XanHalen
Follow
June 16: Topped and LST'd Temperature: [Day 75-78°F/Night 73 - 75°F] Humidity: [50 - 60%] Weekly Comments: J16: looking good, topped 2/3 just for fun to see.... ppfd around 4-500, next week is when I will begin runoff-waterings as I expect by then the roots will be well established post transplant
Likes
52
Share
The week ends Sunday Mar-1, being day 61 of flowering since flipping the light. From first pistils shown, it's day 45 which is a more accurate snapshot of where the plants actually are in their maturity. The buds development is progressing albeit slowly and trichomes are still clear across the canopy with lots of frost on the sugar leaves. The buds have beautiful structure and quite fluffy. Swelling has started on some calyxes. Light is maintained at 30cm above the canopy, with single daily fertigation at lights on - watering 3L per day. Fertigation pH target is 5.9-6.2 whilst flowering. Stopped the practice of fertigating at lights off due to the springtales infestation. Need to allow at least 2-4hrs of lights on period after fertigation. The coco is not dry but still damp on the surface after 24hrs from fertigation. Trying to maintaining an average RH in the space at 50% but it's getting harder now with all flowers. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom. Passive & active intake of air is from a closed off section of the room where the central heating boiler sits - the intake is warm air (20 degC.) and fairly dry (40% RH) during the winter months. - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 - ventilation fans - aquarium heater - small oil heater - small dehumidifier - 20L Airpots and 3.5L general pots for seedling stage - Canna Coco substrate and nutrients - GHE Flora trio nutrients - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy the other at the roots level)
Likes
132
Share
Hi all👨‍🌾👋 Welcome to my another week update Hope everyone keeping well 🧑‍🌾 Week 6 Mar 8 - Mar 14 It was another easy and exciting week. Everything going absolutely great. Both girls stretched nicely despite selective defoliation on Mar 9. They bounced back almost immediately. Started adjusting mixtures towards removing fish mix completely and replacing with Bio grow. In coming week will adding bio bloom and top max to mixture. There was 2 waterings of 3ltr on Mar 9 + last foliar feeding and second on Mar 13 and it was first large feeding 6 ltr beetwen both. Surprisingly only a few drops of runoff. Watering in stages of approx. 500ml every 20-30min. Decided to not install a scrog this time as want to have opportunity to apply more old school methods of training and to be able to remove/rotate girls easily. Let's see if this will pay me off. So far girls enjoying my care very much 😁🧑‍🌾 Thank you very much for all your likes, follows and comments. 🙏💚❤️💜 Wishing you all amazing rest of the week✨🍀 Peace and love brothers and sisters 👨‍🌾✌️💚 Stay tuned for new week update soon Links https://2fast4buds.com/seeds/TROPICANA-COOKIES-AUTO https://www.biobizz.com/ https://fishheadfarms.com/
Likes
41
Share
2/1 - 2/4: Flushed both MPP's on Monday and put the skinnier one in the dark Thursday night. Tomorrow is the end of the line for her. I'll probably let the big fat one go til next weekend. Watered the fat girl Friday. 2/8: The little one is hanging to dry now, and the bigger one is just getting water + liquid soil
Likes
5
Share
Starting week 3, the ladies look good as far as I can tell 😉 The slight problems in week 2 turned out to be a Cal Mag problem. I have a value of 5.25 to 1 in the irrigation water, I have this value with bitter salt balanced out that a 3 to 1 value is created and also foliar fertilization was carried out, this seems to be good for the ladies. As an information, the Cherry Cola Auto already has a very strong smell so it is not recommended without an activated carbon filter. I hope the aroma becomes even more intense when it blooms 😋 Week 3 Day 6 it appears the Cherry Cola Auto is now in pre-flowering I will adjust the fertilizer next week for pre-flowering. The Gorilla Cookies Auto shows no signs of pre-flowering yet.
Likes
7
Share
coming to the bitter end may be 2 more weeks until harvest. Not seeing a lot of bulk or growth. the fade is on, and the watering has been drastically reduced. lets see how it gose next week
Likes
30
Share
@PapasGrow
Follow
Kosher Haze is what it says, kush and haze, very resinous buds. More leafy and less dense buds but long colas full of frost. Effect is powerful, euphoric, longlasting. Amazing taste of sweet berry.
Likes
4
Share
@Thibaut
Follow
I started germinated these beautifull ladies on the 15th, All 5 are doing great showing there first leaves Only the weater is not the best right now but i have faith it will come alright
Likes
9
Share
Likes
26
Share
@darb35
Follow
Day 43 - 1.3L water with half dose according to biobizz schedule + extra calmag (ph 6.3)(84 cm) Day 44 - 1L water with calmag (ph 6.4)(86 cm) Day 45 - 1L water with half dose according to biobizz schedule (ph 6.3)(88 cm) Day 46 - 1L water with calmag (ph 6.4)(88 cm) Day 47 - 1L water with half dose according to biobizz schedule, trimmed some lower branches, hope they finished growing in height (ph 6.3)(89 cm) Day 48 - 1L water with calmag (ph 6.5)(90 cm) Day 49 - 1L water with half dose according to biobizz schedule (ph 6.3)(91 cm) They don't have much more space to grow into, 30 cm from the lamp / tent's roof. Hopefully they are at the end of their stretch, might even give one away to make space inside the tent.
Likes
10
Share
@Ktims420
Follow
One is really budding faster than the rest but all the girls are doing well. Next to no training on these girls due to limited space but they all are filling in nicely. Very happy with the west coast ✌️🏻💚
Likes
14
Share
@MG2009
Follow
04/14/2022 Getting rid of a grape skunk she just isn't doing anything Biscotti Skunk looking good but lemon OG is coming along nicely Been watering by pot weight (by feel) No feeding just water they should all be finished soon
Likes
181
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom 🌱GARDEN OF GREEN SEEDS ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
8
Share
Muy buenas mi gentee Por aquí otra semana en crecimiento con esta increíble SherbetZ V3 de Art Genetix Llevada con bioestimulantes The hype company, que dan unos resultados muy buenos. Estamos en la semana 4 para esta planta y después de la poda apical le salieron muchas más ramas y a seguido creciendo sin estrés. La dejaremos una semana más antes del último cambio de maceta y después la pasaremos a floración. Aver cómo sigue la próxima.
Likes
24
Share
@Spazmagi
Follow
11/3 - Today is technically the first day of Week 5 and also the first day I could see a visible drop in her water level since her last check-in (~12 hours apart). As a result, her ppms shot up to around 800. I diluted the solution with straight tap (7.5pH, 170ppm) since her pH was registering around 5.3. This brought her up to 5.6pH and 670ppm (1.0ec + tap, 500ppm of nutrients). I would have liked to adjust her pH more, but the water level ended up at the bottom of the basket. I'll adjust further as necessary. The other day while attempting to LST her top branches, they ended up snapping off, so I just topped her down one node and broadened her other LST to make her as squat as possible. Once I am able to find a suitable individual ScrOG screen, I will put it on her. 11/4 - I wasn't even planning on doing an update today, but I want to note a few changes. The first of which is a visible difference between her foliage density in a span of 36 hours. Her root bundle is over a foot long and getting more wound up every day. I removed her LST ties in order to take advantage of the ScrOG screen apparatus (see notes below). After lights came back on, she measured 645ppm and had another notable drop in water level. Currently, I am preparing another nutrient solution that closely matches what she is feeding on now. I will be upgrading her to a 5 gallon bucket. I will be aiming for 1ec of nutrients/additives (500ppm + Tap on my meter, Hanna Primo .5 conversion). Tap measured 180ppm, so target ppm would be 680. Later that same day... So I finished upgrading her to a 5 gallon bucket before I actually got done writing the update. Added one photo showing new 5 gallon setup. Solo ScrOG test mk1 - In an attempt to do a ScrOG, but maintain control over each bucket, while still having relatively easy access to each reservoir, I decided to throw together this little contraption. I removed the lowest complete segment of a tomato cage, leaving a short "tail" beyond the lower ring to act as a peg to insert into corresponding holes in the lid. The lower ring is 10" in diameter and the upper is approximately 12" in diameter. Each ring is 11" apart. I would prefer to have a shorter segment, but I haven't worked out exactly how to do this yet. I would prefer to set the screen height at around 6" above the bucket instead of 11". This will have to suffice for the time being while I let my latent conscious work out a solution or one is provided by the community. Above each cage will sit a coated wire fence with grids measuring ~2"x3", as shown in the above picture. 11/5 - Uploaded short video showing Solo ScrOG Apparatus in place. Screen height currently set to 6". Thanks for stopping by my garden, and, as always, Happy Growing!
Likes
3
Share
Still been very hot lately but she doesn't seem to mind it growing nicely her topped area healed nicely with new growth already steming out nice color and even a faint smell
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++
Likes
4
Share
@MistaOC
Follow
************** 13.03. Day 1 ************** 🤞🏼😎 I have new cuttings. Sour Frootz from Karma Genetics. I planted the cuttings in 0.2 L pots. I only applied fertilizer to the large pot. So Let’s grow again 💚💯 ******************************************* 18.03. Day 6 sprinkled with bactrex and transferred into the large pots *******************************************
Processing
Likes
20
Share
Bueno ya tenemos limpita la raices de esta farm cheese y pronto tocará matarile , unas semanas más que aguante y pronto se podrá consumir. Vaya ejemplar en serio muy recomendado todo lo que gira entorno a la genética cheese, y es que los olores son increíbles , y laplanta es brutal solo hay que ver que planta y que flores que saco ... Ph regulado 6,5 quitamos productos ,procuramos no aumentar la humedad más de 45% , temperatura media de 26 grados . Pronto nos vemos buenos humos fumetillas