Definitely love the colours on this girl. Very true to her name, very dark purple/black. 10/10 would grow again

Easy to grow decent yield Lots of colour and smells great what more could ya want

This grow turned out to be quite a journey. Originally, this run was meant to be a simple between-grow project, something to keep the season going outdoors, without too much effort. But plans changed, and the Orange Sherbet ended up in the tent, where it took a completely different direction than expected. She grew big and strong early on, but the LST was tricky. she didn’t respond very well at first, and shaping her the way I wanted took a lot of time and patience. It was interesting to see how she stretched and filled out later, but overall, the structure stayed somewhat awkward to manage. Throughout the grow I struggled with CalMag and potassium balance. I tried several adjustments, sometimes with high CalMag doses, but it never fully stabilized. It’s still unclear if that came from the strain itself or from the BioBizz line, but it made the mid-to-late phase more difficult than I had hoped. The flowering time was also much longer than advertised. the breeder mentions around 9 weeks, but in reality this one took closer to 14–15 weeks total. What was supposed to be a quick side project turned into a long, demanding run. On the bright side, she delivered a very solid yield. a bit over 160 g of trimmed buds plus another 50 g of popcorn, well above 1 g/W. The aroma is lovely after 10 days of curing: creamy, with vanilla and a subtle orange note returning. However, the buds are airy, not as dense as I hoped. The effect and flavor are great, but visually it’s more on the average side. Even so, this grow was one of the most instructive I’ve done. I learned a lot about deficiency management, humidity control, watering and how far genetics and environment interact. Going forward, I’ll take a break from autos and focus on photoperiod strains again. I just prefer the control and predictability they offer. All in all: not my prettiest grow, but a very valuable one. About drying in dry ferm/dry age and regular drying: the material in the bags took a few days longer to dry which is said to be good (regular dry was 7 days, bags was 9 or 10). initially I think the buds from bags look better but now in curing I can't really tell a difference, not visually and not in the nose. Let's see how everything evolves over time but honestly I am not expecting it to differ a lot from regular drying.

.

Chopped on day 57 from from first pistils. Could’ve let them go another week but I have some commitments coming up and I need to dry and jar these flowers before I head out of town for 2 weeks. Will post the harvest report as soon as they’re finished drying. Stay tuned.

New week for the 3th grow It's getting along very nicely must say one is looking better then the other and it's mix bags of sizes to worry about but other then that no troublesome issues what so every Next week going to lower the nutrients and be going into overdrive for next 2 weeks and probably be flushing some after 3 weeks Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

This strain is going to give a lot of big buds, its developing very well. It smells like sweet sour mango.

Danach habe ich leider vergessen Fotos zu machen beziehungsweise auch Videos deswegen folgt nach Woche zwei Woche vier

Aumentato distanza lampada e ph dell’acqua di irrigazione. Le piante stanno bene hanno un bello stretch che sto cercando di tenere sotto la rete. Ora i fiori iniziano a formarsi

_____ Week 11 | Day 78 - 85 | 4th week of Flower ______ Day 78 & 79🌞 - What should I write... Not much has happened, I leave the plants alone. - I put my dehumidifier in the tent this week, it starts as soon as the LF rises above 60%. At the moment it is winter with me and the humidity is very low anyway, saves energy Day 80 🌞💧 - each plant 3 liter Day 83 🌞💧 - at the end of week 4 I provided them with nutrients again. They have become thirstier and now drink 3 liters every 3 days ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 24,4° Hum. avg. - 58 % RLH

Tuesday, day 50. Half journey is gone and now is just patience and care.. only the right amount of water, not too much and not many times per week - maybe tomorrow, friday and sunday. The Nana is the tallest now, since it wasnt stressed by any kind of activity, she’s presenting a beautiful purple tone on her leafs and flowers begin to grow very well. The other topped girls looks pretty same, 55cm in height, a lot of dense buds cover my stems, yeah! The fimmed girl is the shortest but the biggest in terms of yeld! I wanna see the difference between the three metods and see which one works better with the genetic! Sunday - day 55 - cold is dropping hard during these days, temperature start colling down of 1-2°C and I’m worried about the plants.. how can I avoid to kill them with the cold? What’s the minimum temperature for this genetic? Now I’m hitting 15 during the night phase and 17.5-18 during the daily phase (between 6pm and 6am).

Well welcome to week one flower ! I am so grateful she seems happy starting to get the system balanced I’m running rdwc two five gallon buckets with a 3” flex line connecting the base to base With ball valves to control the water height in grow bucket 320gph sub pump in the Reservoir bucket then to water chiller back to grow bucket large enough dependable oxygen pump for grow and reservoir water oxygenation I also alternate Southern Ag GFF and Hydro guard let’s go!

The one jelly donutz is taking a little better than the second. Still battling root issues. Strawberry gorilla auto is a couple weeks ahead flowering

Bud sites are swelling nicely, I’m guessing they will really go for it over the next 2 weeks which is when I’m guessing harvest will be. Maybe 3 weeks. I have nute burn as you can see from the tips, so will be feeding just water next feed and with a slight lower ph to also lower it a little as the run off is 7 currently. Pot drying out every 2/3 days. Taking 2.5 litres Day 58 Noticed some brown spots on the tips or leafs and Margins I’m guessing K deficiency, also most leafs are now going a yellow/light shade of green so my thinking is it’s hungry and I’m under feeding so gonna be upping the pk boost and bloom for the remaining 2 weeks.

_____ Week 11 | Day 78 - 84 | 4th week of Flower ______ Day 78 & 79🌞 - What should I write... Not much has happened, I leave the plants alone. - I put my dehumidifier in the tent this week, it starts as soon as the LF rises above 60%. At the moment it is winter with me and the humidity is very low anyway, saves energy Day 80 🌞💧 - each plant 3 liter Day 83 🌞💧 - at the end of week 4 I provided them with nutrients again. They have become thirstier and now drink 3 liters every 3 days ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 24,4° Hum. avg. - 58 % RLH

Top dressed with some more soil. The top was looking depleted and just want to keep it from completely taking all the nutrients from the soil. Added a mix of power bloom with azomite and glacial rock dust. I watered in with some pure protein dissolved into hot water then added to the water I was using at diluted levels. The second watering they got this week was with molasses. which also does a good job of dropping the ph of my water to the perfect level and a little bit of Epsom salt because I ran out of my cal mag and also want the plant to have plenty of sulfur. Buds are looking cool and remind me of little pine trees. At first glance it seems like they are starting to foxtail but the buds are fattening once the new growth on top starts to expand more. the main colas are almost a foot long each, but hard to tell because the planetary buds around the main colas are blocking them from getting a good picture. Amazed by how frosty the sugar leaves and even some of the older fan leaves are. Her smells are mostly sweet and candy-like. got a little sneek peak of what her fade should look like from one of the leaves being severed partially with a nice yellow and purple. She put on a decent amount of weight this week but towards the end,I can tell she's starting to slow down. Looks like it will still bulk a little more but noticing fewer white and more orange hairs. hoping all my plants finish around 8-9 weeks. i want to try to harvest them all at the same time if i can.

Excellent plant smells mango at harvest 😗

Sorry that the updates have been slow, been busy. Still going regardless though. Although this is a week 5 update I'm ahead at around week 7.. so ill update to current. Hope that makes sense Business as usual, girls are happy.

Cracked a few stems, twisting them 2, 3 points in the main stem and once on each lateral stem, very early monstercropping, cracked the stem without rupturing xylem or phloem channels, minimal recovery, maximum stress and response. There is a new need for significant reinforcement. I know this knuckle will eventually require the throughput of a superhighway. No point in dilly-dallying. Growth grinds to a halt, at least it feels like that. Energy is now distributed fairly evenly to each stem at equal heights and equal light intensity. Growth is not slower; there is just far, far more to do all at once in equal measure, start raising her soil EC up to 1.0mS/cm and maintaining. Upped to 40DLI for now. Temps back in the daytime 87+ range. NPK Raw Grow to keep the soil water solution at 1.0ms/cm, thereabouts. Enzymes and amino acids are applied foliarly to the underside of leaves each night 🌙. Aim to coat the undersides of the leaves where the majority of the stomata are located. Use a spray with smaller droplets to increase the surface area of the leaves that are covered. Adding a surfactant to the mix can help the spray spread better on the leaf surface, improving absorption. Just remember not to add anything immobile.. Heat denatures enzymes. "blah blah what's the point? It's hardly going to do much." Plants have a surprisingly low photosynthetic efficiency, typically converting only 1% to 2% of the total solar energy that hits them into chemical energy. (Too much defoliation and high VPD all night). In fully optimized conditions, that rises to 6%-8% efficiency. Plants may use approximately 25% of their respiratory energy (50% of total respiration) for enzyme turnover, which includes production and repair, but the exact energy cost for heat damage repair is not specific, as the total respiratory energy is not definitively given for plants. Plants generally have a high protein turnover rate, with enzymes making up a substantial portion of this turnover. 10% total ATP is photosynthetically processed. 90% total ATP is processed during cellular respiration. 25% -50% total respiratory energetic output is spent on enzyme turnover (Ballpark). Sounds like it's worthwhile to me. The longer you have waited, the harder you must swing.