Everything going good.. Humidity was a little high so installed a dehumidifier through the wall. Much better now. I got rid of the Gelato it was just bad from jump and then started growing some weird stuff on leaves.. Wasn’t risking the others catching something. But they all seem to be growing good.

This baby is looking so good, I'll be pulling her in a week. She's COVERED in nugs and has a very fruity nutty smell. Beautiful.

Una semana tranquila y con pocos cambios. Se hizo una ultima poda de algunas pocas hojas abanico y poco mas. esta semana a mediados empezó a mostrar los tricomas claramente, hasta entonces fue difícil de verlos.

Buds have all developed and fattened up nicely will start to flush these bad boys later on in the coming weeks prior to the great chop!! I've been smoking the f2's leafs for a while and can honestly say I'm really happy with the flavour profile and resin production.. Am thinking of reveging 1 to keep the genetics alive 😀😀😀 T-14 days 🎉🎉🎉 Just chopped everything down due to space and had a little spyder mite issue at the end.. In all 54 days in flower was a decent amount of time!! Will wait for the final dry w8 and report back!!

I was told this is a 1:1 CBD strain but feels more like a 2:1 Ok so this plant yelded large , thick and dense flowers that are completely covered in sugar , The flavour and smell is fantastic even without a cure , I've been using this in the vapourisor and the flavour is incredible , A very thick and heavy gas that does not make you cough at all , and for me it's a very heavy head high and then you get a very pleasant feeling in your lungs and chest , The effect is very relaxing and claiming , For me it's all you expect from cannabis without the head f*CK It's a really nice smoke indeed , Too the point that I think I will not be turning this plant into oils as in the decarbing temperature you need too choice ether the CBD or the thc at they both decarb at different temperatures CBD needing alot higher temp too activate than thc does , so you ether burn off the thc too get the CBD , so I think this will be my night time chillax smoke as it's real nice ,

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

I’m quite surprised as to how well these girls are looking and smelling!! They’re quality genetics but i also believe every strain will provide pros and cons during the grow. This one particularity has been quite the learning experience. Cannabis is quite the resilient plant and I definitely like growing them. As far as this week goes they’re definitely producing more trichomes and resin glands and appears there’s no more stretch from the plant. No more new growth even small amounts hidden within the canopy. I did a little flush earlier this week and it made the tips of what fan leaves turn yellowish so it def means we’re getting close to the end. Prob got another 2 weeks before I fully flush for Atleast a week then pulling them down. The trichs will be the ultimate deciding factor. I’ll pull when i see the first sign as I like more of a heady high than a couch-lock with little to none clear. Well till next week y’all happy growin and hopefully ya had a good thanksgiving

This was be a very good week 'cause PK 🍍has not suffered for transplant neither for high temps of the day (avg 80 °F peak 87 °F) and the cold of the night (48.2 °F). These are the last days of the seedling stage. I have noticed a very initial N deficiency, a consequence of the last few days in pots. For now I will not fertilize it, I have confidence in the quality of the soil. Forecasts are very bad for the next 4 days so I have built a temporary greenhouse with PVC film. Weed stimulates creativity! 💡

Lunes 19 Agosto 2024 Semana 1 oficialmente como plantulas en jifys, dejaremos en jiffys hasta notar raíz abundante, jiffys hidratados con Agua con Enraizador Radix 10000. Veremos la evolución todos los Lunes.

NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 4x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix

Such a beautiful week! They went straight into flowering and at the same time the growth stage is still visible. Good potential for large plants. I imagine they will finish in ca. 4-5 weeks. It's great to see them explode! I feed/water them every ca. 2nd day. The look more healthy then their sisters that are only in coco. Thanks for stopping by! Any suggestions or questions are very welcomed! ; )

Lunes 11 de marzo 7 am de 2024: Se dejaran hidratando las semillas por 24 hrs. Martes 12 de marzo 7 am de 2024: pasamos a papel dejamos por 24 hrs. Miércoles 13 de marzo 10 am de 2024: revisamos las semillas y vamos preparando macetas pequeñas para transplante. Miercoles 13 de Marzo 3:30 pm se traspasa a tierra. Viernes 15 de marzo 11:47 pm 2024, ya que abrieron bien se pone bajo lámpara 100w a 30 cm de distancia, tienen domo protector! El lunes en la nueva semana subimos el avance, hasta el Lunes... Sábado 16 de marzo 2024, de las 3 semillas la 1 ya abrió completamente, 2 y 3 están por abrir completamente.

This week or a bit more was absolutely fucked up. Heavy rain and cold strong winds every day, but it is getting better now. Plants keep growing taller, except for White Whidow, which is the only one whos flowering well at the moment.

Hey now! This week went very well. I feel like she is finally done growing, and just starting to thicken up and ripen. I did switch from the liquid koolbloom to the dry, and within 48 hours or so I really started noticing the weight of the colas start leaning towards the floor. I did support the main colas last week, but this week I noticed several of the smaller unsupported colas started drooping to the floor, so i added a few support lines. I am thinking maybe she has two or three weeks left. I am not a big believer in an all out flush, as I do not wish to stress her out even near the end. Rather, I am gradually weaning her off the nutes over the next 2-3 weeks. She is starting to get brown tips on almost every leaf so not sure if this is just her being near the end or a bigger issue?? Any advice please hit me up! I'm still struggling with humidity issues, but she seems to be ok! Thank you so much to everyone in this community for all the love, support, and help with my first grow. Thanks and blaze on!

Broke my phone so haven't been able to update but all good now. The soil is peat moss based with added hardwood and banana skin ash to bring the pH up to 6 and bunny buttons mixed in (first time trying rabbit poops) I've also added seaweed . To be sure I don't under feed I've decided to use biobizz , grow , bloom, and top max. I've been keeping the soil damp but not soaked with no run off . The light is at 15000 lux.

1-11 Day 67 Nothing to report today but pictures. Start flush tomorrow 😁🤘 1-12 Started flush, ppm to around 225. 1-13 Just pics

The ORP probe is not calibrated and values are to be taken with a grain of salt. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20240815 24.4 70.3 20240816 24.2 70.5 20240817 24.2 75.4 20240818 23.0 69.3 20240819 23.0 62.9 20240820 23.2 64.2 20240821 22.3 63.4 DATE - PH 20240815 5.63 20240816 5.69 20240817 5.58 20240818 5.85 20240819 5.90 20240820 6.23 20240821 6.21 DATE - ORP (mV) 20240815 60 20240816 48 20240817 35 20240818 18 20240819 3 20240820 -12 20240821 -15 DATE - EC(us/cm) 20240815 2141 20240816 2135 20240817 2191 20240818 2089 20240819 2107 20240820 2117 20240821 2169 DATE - CF 20240815 21.41 20240816 21.35 20240817 21.91 20240818 20.89 20240819 21.07 20240820 21.17 20240821 21.69 DATE - °C (Reservoir) 20240815 22.5 20240816 22.4 20240817 22.8 20240818 22.2 20240819 21.4 20240820 20.9 20240821 21.1

28.8 Eight flowering week is done now and one week of flushing. Both look excellent but they'll go nine weeks. Other one maybe at day 60 because she already is pretty ripe looking. Barney's recommend was 60-70 days so I'll check at 9 weeks 63 days... I'll keep flushing and girls still swell and stack trichs nicely.👌 Not much to report.. Thank for checking in! Happy growing! 👽

Not exactly sure what day this plant is on but she is a monster! Getting very close to harvest time will probably chop her in the next week or so have been flushing for about a week now. Thanks for following & happy growing friends!✌️🏼🙏🏼🌱

Fust Buds Originals Sour Diesel 5th week of flowering completed 18th Jan 2020 So that's another week gone by and the sour diesel auto looks pretty tasty to be honest. Not a lot of bulk and there is a tad too much internodal spacing for my liking However the quality is definately there , with every bud glistening with trichomes and emitting a strong Diesel like smell. The other plant (polyploid) isn't doing much really but will add to the final yield I get from this grow. Cheers for stopping by 👍