Processing
Likes
Comments
Share
@
Follow
Processing
Likes
26
Share
Hey hey everyone! 😀👋 This is week 5! My girls are growing strong and very, very bushy. I gave them a good dose of water this week and it seems they really enjoyed that! Besides that theses are the things I noticed: - The girl on the back is bushier than the one on the front and her leaves are smaller in comparison (with the exception of some leaves). - The leaves might be a little dark in color, but I could also be wrong hah. Perhaps I'm feeding them too much fertilizers? - The stems are getting very, very thick. I like that! - I've tucked so much this week... and some leaves are curling weirdly. Probably that's a sign my efforts are paying off? 😅 - I also reinforced the LST at the end of the week. I need those thick stems to bend a little more! Anyway, that's pretty it for this week! I took tons of photos and I hope you'll all enjoy them! 😍 See you all next week!
Likes
43
Share
~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Harvest: After checking her trichomes which were at 90% milky, I placed the Zkittlez Auto into complete darkness for 72 hours. While in the dark I maintained a temperature of 65-68℉ and a RH of 40%. After three days in the dark I removed the Zkittlez Auto and all I can say is WOW! All of the flowers on the Zkittlez were just covered in trichomes and it had a super strong sweet/fruity aroma that hit me right in the face!😍 I cut the Zkittlez and hung her in two sections as the flowers were huge, and I wanted to make sure that there wasn't going to be any issues with air circulation around them possibly causing issues. It's wintertime here now so I took advantage of the low temp's and RH hanging the Zkittlez Auto in my attic. I sealed off a section of the attic from any light leaks and installed a de-humidifier, fan and humidifier along with a hygrometer which I suspended at the same level as the plant was hanging which give the most accurate reading of temp/RH. After hanging the Zkittles, I adjusted the fan direction so that it was not blowing directly on the hanging plant, but kept the air slightly moving in the room. I set the de-humidifier for 50% which I run for the first 24hrs to knock down some moisture in the plant, then set it to 60-65% for the remainder of the drying time. The Zkittles Auto hung for a full 12 days, during which I checked on it daily to empty the de-humidifier and make sure that the environment stayed on point. After hanging, it was time to trim this beauty up and get her flowers into glass jars to begin the curing process which I prefer to take at least one month, preferably 2-3 months to really get a good cure and allow all the starches to convert to sugars, the remaining chlorophyll to metabolize and the terpenes to form their bouquet! Trimming the Zkittlez Auto by Seedsman was a breeze and resulted in some tightly stacked and absolutely gorgeous flowers that are loaded with shiny trichomes that sparkle, and a sweet and fruity aroma that will make your mouth water!😍 I was super stoked to harvest almost 100g from this beautiful autoflower that was grown in a little .5g plastic popcorn pot that I had saved from a trip to see 'Top Gun Maverick' at the theater and I can attest from cultivating Seedsman's Zkittlez Auto in the past, that with a bigger pot, it is capable of some incredible yields! All in all, this grow was super fun and easy! I highly recommend Seedsman's Zkittlez Auto to everyone from novice's to master growers as it NEVER disappoints to produce some mind blowing fruity buds! ❤️❤️❤️
Likes
6
Share
@Lazuli
Follow
Not much to say ive grown 35 of these now lol
Likes
14
Share
Crecimiento fuerte y vigoroso, una planta muy linda y resistente a las bajas temperaturas. Se comportó bastante bien con la dieta de nutes que le dí ya que no sufrió carencia ni bloqueo de nutrientes. Espere cogollos de alta calidad cubiertos por una gran capa de resina aromática. Su humo es relajante y sabe muy rico a berries y un fondo diésel terroso. Muchas gracias a la gente de Fast Buds por la oportunidad de cultivar genéticas de alta calidad. Ahora solo queda esperar a darles un buen curado y así catar toda la paleta de sabores y aromas en su máximo esplendor, hasta entonces!.
Likes
6
Share
During my previous grow, I harvested and made some bubble hash. Afterward, I dropped the used, wet buds onto this coco, and it seems some seeds sprouted from the leftover material. I’m not even sure if they’re photoperiod or autoflower, but hey—let's roll with it! Both my pH meter and PPM meter are broken. I have no idea why they keep breaking so often. They’re ADWA meters, and while you can replace the reading elements, the replacements cost half the price of a new meter. It’s frustrating, and I really don’t want to keep buying them every time I start a new grow
Likes
31
Share
@Pedrojuan
Follow
En el comienzo de esta 3a semana de vegetación, parece que la situación va mejorando, gracias a las personas que me aconsejaron bien, para no entrar en pánico... seguramente estaban estresadas y ya les paso...😂😂😂 en fin, esta semana subo el EC a 0,6, distancia de las luces a 1,2 mtr y veremos cómo procede. Tengo ganas de probar una CORTE APICAL con este cultivo y ver qué beneficios me trae; si alguien lee esto y me quiere aconsejar cuando y cómo hacerlo, soy todo oídos.
Likes
1
Share
Found out the water I was using had a ph of at least 7 instead of 6.5 like I had thought. I also had a cal mag deficiency from using LEDs and reverse osmosis water. Now I have a ph tester to prevent the first issue and cal mag for the second.
Likes
39
Share
Es geht langsam dem Ende zu die Pflanzen zeigen voll schöne Farben und glitzern schon schön 🤩😎 es sind ja noch ein paar Wochen also da geht noch was
Likes
54
Share
Updating for the week of 9/12 Euphoria is doing great. She responded well to the top dressing last week, but I figured she could use some more sugar so I gave her molasses and liquid nutes this week. There were a lot of worms that got exposed during watering so that's a really good sign that they're in there, working what wasn't completely broken down in the compost, and leaving worm castings behind👍 Otherwise I think it's all covered in the video! Obviously I didn't upload after taking photos and video, I thought I could push through my migraine a little more but then the kaleidoscope aura kicked in and I had to hide from the sun... and the rest of the world. Happy growing
Likes
15
Share
@Kirsten
Follow
30.4.25: This worked out very nicely 👌 I just found Ecothrives' new, Trace! I was looking for Cal-Mag with no NPK. I came across this, I'm genuinely so excited to get using this! Ecothrive has the best products, hands down. As fate would have it, the plants are looking pretty dry! I'm going to be watering with the Trace and Biosys. Let's see what happens 😁 6 litres of dechlorinated water PH'd to 6.1 contained: ♡ 3ml of Ecothrive Trace ♡ 1/4 Tsp (2.4ml) Ecothrive Biosys The plants received 3 litres of this feed each. PPM 475 PH 6.0. So after I watered, i decided to tie down a very large branch that had grown significantly taller than the rest of the canopy. It decided to bend instead. Luckily, it didn't snap. The outer membranes are all intact and unbroken. So I guess it needed a supercrop instead! 😅 I'm not worried at all, I just need to remember when I'm moving the pots around. Otherwise, it certainly will snap! 🤞 Let's see how we're looking in a few days after the first Ecothrive Trace application! 1.5.25: I mixed a foliar feed with my new Ecothrive Trace. I filled a 250ml spray bottle with dechlorinated water PH'd to 6.0 with 4ml Ecothrive Trace. I used the entire bottle in 3 plants throughout the course of the day. The fan is very strong, so it didn't take long to dry. However, I did keep the lights dimmer to ensure no leaves were burnt. Additionally, I spent more time than I care to admit massaging the foliar spray into the leaves 😅 I also moved the LED lights up as Northern Lights is still stretching. Par was about 600-700. Which may be too much. I'll keep an eye on it. I also watered with 1.5 litres of dechlorinated water PH'd to 6.0 to Northern Lights. I added 1/2 Tsp of Sea K(elp) by Greenleaf nutrients. PPM was 645. 2.5.25: I watered 1 litre today. With Greenleaf Nutrients Bud Explosion PK booster 1/2 Tsp dissolved in dechlorinated water PH'd to 5.9. PPM came out high at 1300, so I watered another litre through just plain, PH'd to 6.2. 30.4.25: This worked out very nicely 👌 I just found Ecothrives' new, Trace! I was looking for Cal-Mag with no NPK. I came across this, I'm genuinely so excited to get using this! Ecothrive has the best products, hands down. As fate would have it, the plants are looking pretty dry! I'm going to be watering with the Trace and Biosys. Let's see what happens 😁 6 litres of dechlorinated water PH'd to 6.1 contained: ♡ 3ml of Ecothrive Trace ♡ 1/4 Tsp (2.4ml) Ecothrive Biosys Let's see how we're looking in a few days after the first Ecothrive Trace application! The plants received 3 litres of this feed each. PPM: 475 PH 6.0 1.5.25: I mixed a foliar feed with my new Ecothrive Trace. I filled a 250ml spray bottle with dechlorinated water PH'd to 6.0 with 4ml Ecothrive Trace. I used the entire bottle in 3 plants throughout the course of the day. The fan is very strong, so it didn't take long to dry. However, I did keep the lights dimmer to ensure no leaves were burnt. Additionally, I spent more time than I care to admit massaging the foliar spray into the leaves 😅 I also moved the LED lights up as Northern Lights is still stretching. Par was about 600-700. Which may be too much. I'll keep an eye on it. I also watered with 1.5 litres of dechlorinated water PH'd to 6.0 to Northern Lights. 2.5.25: I watered 1 litre today. With Greenleaf Nutrients Bud Explosion PK booster 1/2 Tsp dissolved in dechlorinated water PH'd to 5.9. PPM came out high at 1300, so I watered another litre through just plain, PH'd to 6.2. 5.5.25: FastBuds Mystery seed #1 is focusing on bud building. There are certainly chunky buds beginning to form here! 😍 She has pretty well stopped stretching, and so she's shorter than Northern Lights, which is still growing vertically, this is a little unfortunate as they're no longer a Sea Of Green. Unless Northern Lights is a tidal wave 😅 So because the canopy is no longer uniform, the lighting is difficult to dial in. Which has never been my strong point. Her leaves are still very dark. I'm going to top dress with Ecothrive Life Cycle, but because of the darkness of leaves, I won't add the Ecothrive Charge. Which is mainly more vegetative growth needs. Which will contain more nitrogen, which we certainly don't need any more of at this stage. Plant top dressed with; ♡ 2 Tbs of Ecothrive Life Cycle ♡ 1 Cup Worm Castings ♡ 1 Cup Canna Coco ♡ 1.25 Cups Perlite I watered in with 2 ltrs of dechlorinated water PH'd to 6.3 containing .25g of Ecothrive Biosys. This next week will just be monitoring of excess/ deficiency of nutrients and probably another foliar spray of the new Ecothrive Trace. I have removed a few fan leaves at the lower canopies. As well as removing all the LST clips. Next week, we might remove all the fabric ties too, I'll see how we're looking. That's pretty much it! Thanks for checking out my diary and hanging out 💚✌️🍃😊🌱
Likes
33
Share
hi to all, brothers of the weed! Welcome to Peaky's Enchanted Gardens this week we will get rid of all excess nutrients by rinsing the plants with only pH balanced water and push them to also get rid of accumulated reserves! kiss kiss to all you are the best
Likes
20
Share
@Luv2Grow
Follow
Day 71 - She just seems to get frostier everyday, it just keeps packing on. This girl has definitely been on of the frostiest I’ve grown yet. The smell she’s producing just smells like sweet citrus and really looking forward to the chop but will probably give her till the end of week 12. So she’s got about 2 weeks left and the next watering, she’ll be flushed and nothing but water till the end. Day 72 - Not much I can say about this girl right now, just waiting for trichs to be right to chop. Will give her a flush tomorrow or Friday. Day 73 - I wish I could get good pictures of the trichs but I never can. I’ve tried different attachments for my phone and everything else but nothing seems to work but either way no clear left and 100% milky but would like to get at least 20-30% amber before chopping but at least I know she’s ready at any time now. Day 74 - Gave her a flush using Foxfarm’s Sledgehammer and no just letting her go until she finishes off. Still not really seeing an amber trichs so she’s definitely not ready for the way I like it. Day 75 - She’s starting to show a bit of amber trichs now but only about 1-2%. She could be getting chopped next weekend but possibly sooner depending on how she finishes off. Day 76 - Was almost ready to cut the girl today but decided to hold off till next weekend. She’s already bulked you’re quite a bit but gonna give her time to feed of the nutes in the leaves and see how much more she will bulk up. Day 77 - Nothing new, just waiting to chop. Might give her another flush tomorrow or Wednesday, just to make sure all the nutes are out of the soil.
Likes
3
Share
@TrimQueen
Follow
2 second week of blooming. 11 day.
Likes
46
Share
@Dreadnug
Follow
Mid week check in with grow issue (mostly on the Future #1 and Future Island - other strains in my grow room). Will post for feedback. Held of on any nutes this week as I try to get my grow issue under control. Looks like either calcium or potassium or both. I initially bought some lime and added that to some well water instead of the RO water I had been using. I also fully flushed out all of them in order to ensure that I didn't have any lingering issues. A little unsure how it got to this point as I have used RO in past grows. My RO is barely 6.0 ph and the well is well over 7...closer to 7.5. I had not changed my diary's ph since veg since I think I had mixed up the reading between the RO and well water. Either way, I plan to feed them all well water and balance the ph to 6.5. Except for some of the leaves showing some stress, the bud development is looking very nice. I plan to ease back into a more reserved nute blend later this week. Trying to get the humidity under control but with the excess heat the humidifier gives off it has been a bit of a struggle. Going to set up the unit on a timer so it dehumidifies at night where there is less heat in the room. Plant #1 - Continued fattening of the bud locations as well as more turpentine development. Looking good. Plant #2 - no more stretching, bud development is coming along just lagging behind a bit.
Likes
21
Share
The time has come, here we are into the first couple of days of flowering, slightly upset because I can’t look at them during the day and their light cycle runs at night but I have to get used to, I used to spend hours staring at them. My Gf told me to get for a second into the feeling of the plants and imagine this human look at me for hours 🤣🤣 I have to admit that would be slightly creepy and they don’t know yet that I’ll chop them down and smoke ☠️ Enjoy fellow growers ☮️✌️🏼😎
Likes
6
Share
@pzwags420
Follow
On day 3 week 3 of flower shes putting out a lot of preflowers and the tops are staring to put out pistils and start of sugar leaves. Im giving a max of 1100 ppfd on tops with an average of 900 ppfd on all tops. Im very happy with the pheno so far and look forward to her expressing her aroma! :)
Likes
9
Share
@Headies
Follow
So I have spider mites. I screwed up so much i think this is going 15 weeks. Lost coast to the rescue! time to finish these buggers off
Likes
13
Share
@Bryankush
Follow
Bene finite le 3 settimane di fioritura ha dei calici ben gonfi e con un profumo tropicale spettacolare😁🤤 Giorno 2 la sera viene annaffiata con 2L di acqua a 980ppm Giorno 7 viene annaffiata con 2L di acqua a 1000ppm
Likes
12
Share
@Daviz_42
Follow
Una variedad muy productiva con un olor y sabor muy dulce a Sherbet y papaya una combinacion excelente, muy buena genetica, un poco de oja en el pheno1 pero todas estan llenas de resina...asi que genial para el trim y poder hacer extracciones luego.