Last week of flower, I flushed during the last 4 days, I didn't do big flushes I simply water the plants with plain water, last 3 days of complete darkness. I think that next time I will complete the flush and then give 3 days of complete darkness, the fact that the plant is not receiving light makes flushing harder because the plant drinks less water. During the last 3 days, the humidity was always greater than 50% but the plants didn't seem affected. Before I started the flush the pant was only receiving 8h of light. I'm currently drying the plants, the temperature fluctuates between 17 and 19 degrees, I start with 65% humidity and I reduce 1% of humidity every day. I Do a 14 day dry DAY 134 PH - 6.02 Solution Temp - 16.9 PPM-1955 Watering Volume per plant - 4L DAY 136 - Molasses PH - 5.92 Solution Temp - 15.2 PPM-300 Watering Volume per plant - 4L

This beautiful girl turned out to be a real strong queen who withstood very strong stresses, she is very persuasive for ScrOG, in 2-3 days when she comes out of the stresses I will switch the light cycle to 12/12.💚💚💚

Another week has gone by. Still not seeing any amber trichomes but a lot seem to be going cloudy so hopefully another 2 weeks MAX for this one. Both plants are looking kinda deficient but only a week or two left so not too fussed about that. Both plants smell very sweet and are both the same smell too which suggests a nice strain stability. Still unsure which one will yield more, one being topped and one left to its own life. Hopefully next week we will see some amber!

Some days watering runoff PH 6.4-6.5 Feel good bro.

Just a short update this week. Again, everything is going very well. The smell is developing, as is trichome production 😎 Hopefully not too long left now! Had to UP the Ph level this week, turns out Shogun Silicon is great for raising it 👌

SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY TRANSPLANT #2 THIS WEEK!!!! This week was a great one, lots of sun and gave the plants their 2nd transplant of the cycle. only one left to go in a few weeks, the plan was to do 3gal but I feel it would be best to go upto 4gal a 1extra gallon will not be all that much extra root space to expand into. Will have to check if they even make them in 4. I have a feeling its only 1,2,3. Root wise they are looking similar but not identical. I would say the Dynomyco treated plant has a thicker rootball and more of them. but not by a massive amount. More white on the Dynomyco treated plant as well. added in some more Acti-Sol into the transplant medium. same mix as before. Then watered in with some LAB Serum. should do the plants well. I did not add in anymore of the MIIM microbial mass product as I thought it might alter the results of the grow. so we will see how they do now with out it. I'm really liking how well the plants are bushing up. I might have to take some clones and try them indoors as well. I think I prefer to grow more indica leaning strain for their growth habits. SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY This is my diary entry into the Dynomyco Show Us What You Got Contest! #DynomycoShowUsWhatYouGot! @DynomycoShowUsWhatYouGot! @Dynomyco Big Shoutout to @Dynomyco for picking me in their contest. Happy to be involved and as a user of Dynomyco I am curious to see this side by side with my own eyes. I will be honest I am a little skeptical it will show any major differences. but we will see what happens. Some disclaimers, I am still using LABS serum I made, This is also beneficial to the root mass however it's a bacteria based product and not fungal or mycorrhizae like Dynomyco. https://growdiaries.com/giveaways/DYNOMYCO_Show_Us_What_You_Got

Buenas a tod@s... Otra semanita más de flora para estás hermosas niñas... Creciendo un poquitito más, super bien, super fuertes... Ya faltan pocas semanas y la verdad q lo las veo nada mal, absorben muy bien los nutrientes, aumentado el riego a 1lt x planta, no tienen ningún signo malo de nada, todo perfecto, eh tenido que hacer un poco de defoliación ya q habia muchísimas hojas grandes, se nota la buena circulación de aire, la penetración de luz en las partes bajas ( que aunque algunos no les den importancia o digan que esas zonas le quitan fuerzas a la planta, a mí me gusta dejar que crezca todo tal cual, sin problema.) son cogollos pequeños, pero los aceptamos igual, claro q sí... Buenos humos y buena semana para tod@s a seguir trabajando... 🤗👍🏻🙏🏻 💀😎🇦🇷

Hey guys and welcome to start of Week 8! 🌻 Today is day 21 of flower so i went ahead and cut most of the plats Fanleaves off. It took a while but now the Airmovement is improved and the humidity should also be lower. I also hope I didn‘t stress them too much. From now on they will be reseaving less and less Nitrogen going forward. I hope the colours come through as well 🤞🏻 Thanks for following along and I will keep updating the progress. Happy growing 🍀

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

She has a window seat and 1000 watts of supplemental lighting. Feed 4 times a day. What more could a plant ask for??? The growth has been amazing. Seriously Amazing. At 27 inches she is the shortest one of the three. Her arms are stretched to 24 inches across. She is taking her space with the stretch.

Did another topping today. Hope there will be 8 strong main branches. Also raised temperature and humidity a little and plant looks much better now. Roots still healthy and white. UPDATE: Did defoliation for big fan leaves and LST for all 8 branches.

2/2: Some of the huge fan leaves had to go. Not even the strongest of tucking would control them. Flowering is officially starting! Trying to rotate to get as much light to bud sites as possible. Excited to see where things go with this one. 2/5: determined that there was a bit of a light burn situation. Decided to pull her from the tens for a good flushing and then rearranged the tent a bit to keep her off to the side a bit. 2/7: she's a big girl. I have her flying solo in the tent for now..

I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!

nice seeing them creaping up.. some colder days menth less water.. some more lst on day 31 1 juli 2020 outdoor had some 30 degrees days disaster... cold weather 19 degrees i have defoliated them again buth they dont respond wel difficult plant to grow up for me at least... and now !!!!!!!!!!!!!!!!!! one of my dogs ate the top of the outdoors plant ending its cycle outdoors i have now taken her indoors in the hope she will pick up again 18 / 6 of light led viparspectra 600w 25 cl of clean water i have no nutriens in the house to give them so .................. I KILLED THE DREAM gonna put some autoflowers in the soil from sweet seeds and royalqueenseeds i am now tester for both gooood journey to you all see ya in the next diary

The plants look very healthy and they have big and dense buds , ill havr to wait anothe week or cuple days until harvest even tho it may be a bit soon for it. One of the plants has started to root its top head of the buds , but i soupose its because of the temp . The air is getting dry cuz of the hot weather even tho im using 250w-400w lights on them . Trichromes look preety good and the bud is frosty . Some of the plants are not ready yet for some reason so i think i have to give them a bit more time

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Sie bekommen 20 % Rabatt bei Zamnesia und der Code lautet ZAMMIGD2023.

This is the full detailed pictures of my first grow.

Going smoothly, got a 3rd Trellis in case they grow to high

Bienvenue dans ce nouveau diary, Cette fois j'ai choisi une nouvelle variété dans le cadre d'un sponsoring de kannabia. C'est difficile de choisir dans leur catalogue, on a envie de tout cultiver ! J'ai donc choisi et reçu un sachet de chaque variété go fast. Merci les amis de @kannabia, je suis très heureux de cultiver ces variétés. Je vais m'appliquer. Mon espace est petit, je ne vais cultiver qu'une plante à la fois. J'ai mis une graine en germination dans un verre d'eau. En même temps j'arrose le pot textile de 11 litres d'un litre d'eau très lentement. Lorsque la graine sombre au fond du , elle est rehydratée et posée directement dans son pot. La germination a pris 5 jours. J'ai essayé un time lapse pour la germination, j'ai encore quelques paramètres à régler. Voilà pour l'instant tout va bien !