The strain grows pretty easy. She can definitely eat a lot nutes but be careful into flowering her ph tends to swing very slightly but if not caught early can be a bit detrimental later. Grew a 5 ft plant in a 3.5 gallon res and she flourished. Good and fun photo period plant.

not sure if leaf coloring going is natural or an issue of some kind..

Got a little behind on the defol. but everything runnin smoothly besides that. I lost a fight wit a greenhouse and he bruised my ribs. Been gettn around a little slow. Then on top of that broke my phone again ya kno, because im retarded. That makes life difficult sumtimes. Just given em a gal of water and a recharge, coconut/aloe water mix rotated every 3 or 4 days and trying to stay out of the way. I had an issue wit the blumats so just turned it off about a week ago. Ill get around to fixen it eventually....50/50 on if thatll b during this run. Member berry grew weird but turned into a monster, purple punch is standing out and so is the wedding cake and gorilla blue. And obviously the D is lookin lovely as always. Im down to 13 because i cut a gsc. It was a long shot from the start and didnt want to risk a hermie. Cant wait to finish this run so that i can make a plan for outside. Form sum kinda ranking. How many of which plant goes where and all that. I kno...I Kno I take shitty pics🤷

These are the last images before harvest. I turned the lights off and will let them be in the dark for 24+ hours. I will then proceed cutting/hanging and drying them.

Week 3 Great Pistil growth looking forward to day 21 defoliation I’m seeing really fast growth Gelato Cake. Check out my other Dairies (The New & Jungle Verde) Nutrients (floraflex) are in Grams/gal* Light: HLG Follow my IG @therealterpio for more updates & content!

Cruising along.

Alles beim Alten, den Ladys geht es gut. Ab Mitte/ ende der Woche kommt das PK 13/14 dazu.

Day 8 Mon PH 5.7 EC 0.8 DLI /19h / PPFD / Water 23c Day 9 Thue Change the water and add nuts 10 L PH 5.2/5.8 EC 0.8/0.8 DLI /19h / PPFD / Water 25c Day 10 Wed I've confidently carried out defoliation on the lower branches of my autoflower plant. Despite the advice against it for autoflowers, I've decided to trust my intuition and follow my gut feeling. Time will tell the results. 😎 PH 6.3/5.8 EC 0.8 DLI /19h 17 PPFD / Water 22c Day 11 Thu PH 6.1/5.8 EC 0.8/0.9 DLI /19h 17 PPFD / Water 22c Day 13 Sat Add water to lower EC PH 5.8/ EC 1.0/0.8 DLI /19h / PPFD / Water 22c Day 14 Sun The plant was slow to grow, but now it's starting pre-flower early. Add water to lower EC PH 5.2/5.8 EC 0.9/0.6 DLI /19h / PPFD / Water 20c

Knocked a couple of tops over to try to even the canopy. The first few pistils are starting to show, which is exciting. No topdress, just some Stash blend once this week.

End of week 4 and I have a bit more to report this week. On day 22 I topped this girl and she was a little slow to react, turns out my thermometer was in a bad spot and the girls were getting hammered by the heater 🤦‍♂️ lesson learned. Since re-positioning the thermometer they have bounced back and happy as Larry again, thank goodness. On day 27 i had brewed up my first compost tea and fed them a bit more than usual. The tea had a cup of Herbi's brew starter, a cup of work castings and a cup of organic compost. They loved it. I used the remains as a top dress afterwards. Today, on day 28, I defoliated and started LST, she's praying to the lights right now and I'm stoked! Hope you've all had a good week and thanks for checking in 🙏

She smells great! I wish she didn't get powdery mildew at the end but I couldn't risk it spreading to my other plants. Fortunately I caught it in time and the buds look good. The biggest one weighs 36 grams.

Hi Growmies, So let me introduce you this 4 little gorilla gals who survived the first week of their life in the wild. As I mentioned last week, we needed 4 healthy individual to populate the future forest and it’s succeeded. The one who struggled is also starting to catch up to her sisters.🌱 They got a bit lanky as I was way too careful with the light. One needed help because she fell on the pot. So slowly raised the light intensity first to 220 ppfd and at the end of the week we finished at 350. They seem to like it so will leave it for a few days. The sf1000 is running on 55% at the moment.🌞 Watered twice this week. First with 150ml each and 3 days later with 220ml. No macronutrients have been given to them yet.💦 I’m happy how they look 14 days after the start of germination. See you next week!🙌

Day 44, 2nd of November 2021: Hi there. So the plants had 2 days of darkness before the lamp was on again and from today it is 12/12. Big change also is the power: It is now on full power which is 240W so 100% capacity. Ventilation is different as well under the 12 hours period when the lamp is on it switches 1 hours on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same, temperature as well. Fertilization changed, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. Previously it was just 1ml per liter each. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week. Not much to mention as it just started.

** COST ** TO RUN - Used previous ⛺️ setup : 0.00USD - Monthly electricity : 36.73USD <-- other ladies sharing ⛺️ - 3 Gallon Fabric pot : 0.15USD - Bonsai wire : Apx. 0.03USD - Reused soil from last run : 0.00USD FOR NUTRIENTS - Jadam Microbial Solution : 0.00USD - Fermented Plant Juice : 0.00USD APPLYING - JMS : 30ml / 1 Litter - FPJ : 30ml / 1 litter TOTAL COST : 36.91USD Throughout the week, I give compost tea, and fermented plant juice once each ^^ Its almost time!! Trichrome are cloudy, but its hard to find amber Trichromes yet. According to Fastbuds she will be ready in 4 days ^^; Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@

"And God said, Let there be light, and there was light." Genesis 1:3 Inhale for 13s, Exhale for 13s, Inhale for 8s, Exhale for 8s, Inhale for 5s, Exhale for 5s, Inhale for 3s, Exhale for 3s, Inhale for 1s, Exhale for 1s, Alignment. 1.618 More energy, more blueprint. Electrical Conductivity refers to how easily a material or solution allows electrons or ions to flow continuously when an electrical potential is applied. Electrochemical Reactance is the opposition to alternating current (AC) caused specifically by the temporary storage of energy in electric or magnetic fields, rather than energy being lost as heat. Reactance does not directly alter a material's intrinsic electrical conductivity. Instead, it dictates how the system stores and releases energy over time, which creates a temporary barrier to current flow in AC circuits. Together with resistance, reactance makes up total impedance. Electrical impedance (the combination of resistance and reactance) in the rhizosphere dictates how easily ions and water move into plant roots, directly impacting the Electron Transport Rate (ETR). High impedance restricts ion mobility, leading to nutrient deficiencies that decrease ETR and stunt overall plant growth. Using copper and zinc plates in the plant medium to form a natural earth battery to assist with Electrochemical Reactance. The moist soil acts as an electrolyte, while zinc serves as the anode and copper as the cathode. Zinc is a highly reactive metal and oxidizes, losing electrons into the soil. These electrons travel through an external wire to the copper plate. The moisture and dissolved salts in your plant medium allow charged ions to move freely between the plates, completing the circuit and generating a small direct current (usually between 0.8 and 1.1 volts). This micro-current subtly alters/the Electrical Conductivity (EC), allowing more effective breaking apart of chemical bonds in the soil (electrolysis), making soil nutrients like phosphorus, calcium, and potassium more accessible to roots. Buried the zinc plate on one side of the plant’s root zone and the copper plate on the opposite side. Ran an insulated copper wire above ground to connect the zinc plate to the copper plate, creating a closed loop. Make sure your soil remains moist and contains natural mineral salts; entirely distilled water or bone-dry medium will prevent ion exchange and block the current.

Nach dem ich die in ein anderes Zelt gestellt habe hab ich besseren Überblick und komme besser an die Pflanzen ran das erleichtert mir so einiges. Advanced ist Mega bin sehr zufrieden etwas zu viele Flaschen aber was soll’s

Potted then up to 4ltr pots ready for flowering ✌️ switched to 12/12 on day 35