The Grow Awards 2026 🏆
Likes
Comments
Share
At the end of the second week of bloom the super skunk feminised is doing good, the growth gained is 12cm. Her leaves are a stable green and signs of white stigmas at the tops gives indication of bloom. There’s no issues this week and she will be fed as required. The super skunk feminised stands at 59cm ta
Likes
25
Share
D57 F13 - The week is off to a good start. This lady continues to bush out AND stretch at the same time! I started doing some minimal HST - just to try to keep her going as much "out" as possible, as opposed to "up." D59 F15 - Feeding every other day was just not cutting it anymore, therefore, I started feeding daily this week. There are two other plants in the tent besides this 707 Headband, one Sour Diesel and one Zkittles. So, I'm currently mixing up 12 gal. of nutes in a batch, feeding 6 gal every day - 2 gal/day per plant. Check out the ladies getting fed in the video I included above ;-) Also, I took several pics today; some of those pretty buds getting of to a good start.
Likes
2
Share
2025-10-16 The kush´n Cookies plant does really well, i was tucking some leaves and shoots- she spreads like she gets it paid. RH was lowered, Predaors were added for pestprevetion watertank was filled The fun can start. Container: 35L Smart Pots Growing Method: Autopot System with "Water-Only" strategy 🌿 Soil Preparation Base Mix Recipe: 5g per liter soil - Startrex 5g per liter soil - Silicium Flash Mixed thoroughly for optimal distribution 5x Fertilizer Tabs - strategically placed near bottom (20cm height) for autopot compatibility 1 tsp Mycotrex - applied directly in planting holes Bactrex solution - used for initial watering 🏗️ Layer Construction Bottom Layer (10cm): Drainage material (clay + perlite) Air Circulation: Airdomes positioned Growing Medium: Pre-mixed soil with embedded fertilizer tabs Root Zone: Mycotrex application + seedling placement Initial Watering: Bactrex solution ⚙️ System Activation ✅ Setup Complete - Autopot system now delivering automated water-only feeding From this point forward: Pure water automation via Autopot system 🙏 Acknowledgments & Partnerships Special Thanks: Biotabs - Premium nutrient solutions 🏭 Puraplants - Autopot system provider 💰 Exclusive Discount Codes 🌐 Puraplants (Hamburg, Germany) www.puraplants.de Code: GrowBigger → 10% OFF Biotabs Webshop biotabs.nl/en/shop Code: GDBT420 → 15% OFF
Likes
36
Share
End of Week 2 of Flowering Report: This week, the plants continued their rapid stretch, and I've been watering them daily with no runoff. Day 11: I reset the rockwool with 50 liters to thoroughly re-soak the medium and maintain optimal conditions. The light intensity was also increased to 75%, giving the plants more energy as they settle into the flowering stage. R.I.P. The Runtz plant was removed from the tent this week as it was too small and wasn't keeping up with the others. The Oreoz is also lagging behind, and if it doesn’t show better development by next week, it will likely be removed as well. The increased light and regular watering have kept them happy and vigorous as they continue to develop!
Likes
2
Share
@moswald14
Follow
plants keep impressing me. cannalope is growing some 16 or 17 petals on a leaf after some weird reveg or stress. it flowered early for some reason. might be because of the bennies and the N abundance. after the weird 16 leafed freak is some good looking regular 13 petaled ones. its gonna be legit. maybe I should clone one of the 13 pedals to keep the pheno. the other colas have the regular 7 or 11 petals. the lemon skunk is flowering nice. I have a feeling its going to be some tasty bud. no mutations or anything weird going on with it. she is looking just fine.
Processing
Likes
19
Share
@Skuba
Follow
Beginning of week 3 of flower for this girl and wow. She’s looks amazing😍😍. Last feed was about 600 Ppms. Purple looks stunning on this plant.
Likes
3
Share
Likes
17
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 I spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Likes
1
Share
@BruWeed
Follow
Esta semana ya realice la poda. Se encuentra en estos momentos en etapa de secado dentro de una caja especial para secados de flores que uso siempre y nunca me falla. En humedo hay 195g y utilice una lampara led de 150w en todas sus etapas. Próximamente estaré publicando cuando este en curado.
Likes
16
Share
@I_Ozmo_I
Follow
All plants were live frozen and processed to bubble hash. After drying the product the hash was processed to live hash rosin and been cold cured afterwards
Likes
67
Share
Day 48: - Shuffle some plants again to give them better spots. - Did defoliate again to make sure the lights can reach lower buds. Photos and videos where taken before watering, thats why the leafs are not lifted. Nothing special this week. see you guys next week.
Likes
24
Share
Likes
21
Share
Brown leaves, decent sized buds - that's the name of the game right now - Bertha is still looking the strongest. This first run with the new tent and auto pot system has gone better than I expected, and I'm glad to have worked out some of the kinks, still lots of room for improvement. Thanks for taking a look! 🙏
Likes
6
Share
Purple lemonade has been looking crazy for weeks smh. I haven’t had time to continuously update. Pics and video are from 7.22
Likes
26
Share
SORRY TO EVERYONE WHO TRIES TALKING TO ME....I STILL CANT TALK TO ANYONE BECAUSE I TRIED CHANGING MY EMAIL ON HERE AND IT MESSED EVERYTHING UP. I CANT LIKE ANYTHING OR COMMENT ON ANYTHING. THE WORST IS I CANT JOIN CONTESTS😪😢😭 FINALLY STARTING ANOTHER GROW. MY BACK HAS BEEN FUCKED FOR MONTHS. CANT WAIT!!!! IM DOING 24 AUTOFLOWERS FOR THIS GROW AND IN 5 WEEKS IM STARTING ABOUT 20 FEMINISED PHOTOPERIODS IN MY 5X5 WITH A TSW2000 SO THEY CAN BE READY TO MOVE INTO THE 8X8 TENT AFTER THE AUTOFLOWERS ARE FINISHED. HOPE MY TIMING IS GOOD🤞🤞🤞🤞 LOL
Likes
27
Share
@Zamzam974
Follow
Salut les cultivars sa roule ?! C+29 a C+38 début floraison je pense... Sa pousse bien. Bonne vigueur des autofloraison surtout la critical... Arrosage tous les 3 4 jours 1litre par pot apport de mélasse à chaque arrosage... J'ai jouter deux ampoule une Led de 15w et cfl de 23w équivalente à une 100w la Led fait 4000k 1500lumens et la cfl 2700k 1500lumens la plante transpire pas mal mai pas de souci de moisissures... J'installe la cfl 250w 2700k quand la floraisons sera bien démarrer... Tous conseils sont les bien venu merci je c'est pas si je vais a 12/12 pour la wombat qui est féminisé pour ne pas perdre en quantité sur les auto qui et mieux 18/6 sinon bouturage pour la wombat je suis dans l'impasse total pour le moment 🙄
Likes
13
Share
Clones con 14 días, ya todos enraizados, de las 3 variedades Medical Mass CBD de Royal Queen fue la que colonizo mas rápido, seguida por Medikit de Budhaseed y por ultimo Tangie de BSF, a pesar de que fue la ultima en colonizar la cantidad de raíces en la Tangie era mucho mayor y con gran carga radicular. Raíces de Medical Mass CBD mucho mas grandes y con gran cantidad de radículas. Promete!!
Processing
Likes
9
Share
SUNDAY 6/23: I floated a single Zkittlez bean today to try in my Summer outdoor grow. Once it sprouts I'll sprinkle it with great white and plant it in a rockwool cube. Once I see a good amount of roots sticking out I'll sprinkle the roots with mycotrex and plant it in a 3 gallon pot that's already prepared with startrex and silicium. I'm also gonna be using biotabs, orgatrex, bactrex, mycotrex, boom boom spray, PK booster compost tee, bud candy, and terpinator in this grow. I've got a new outdoor faucet timer that I'll have run a soaker hose for 10 minutes at a time, several times per day through the hottest part of the Summer. (105f-110f), and she will be located in a fairly shady spot,. Hopefully baked Zkittlez are as good as the regular kind...😁 MONDAY: I figured what the hell and floated a second Zkittlez bean today...I've got the space, and I really like candy... TUESDAY: The first one sprouted into an inch-long seedling overnight, so I dipped the taproot into Great White, and put some more down the hole before planting it. The second one sunk. For stealth purposes, simplicity in transfer, and to give the seedlings an advantage, I've decided to transfer the rockwool-cubed seedlings from the dome to some 6" pots (1/2 gallon) that I've prepared with startrex and silicium flash. I'll grow the seedlings under my 2000w blurple light for a couple of weeks before taking them outside. I should be able to carry all of them in a big box out to the site without injuring them. This will give me time to start sneaking the big pots out to the site. I'll pre-mix the startrex and silicium flash on-site and add the mycrotrex when I transplant them to the 3 gallon pots and give them a good douching with bactrex and orgatrex to get them started well. My soil has been recharging for several months with tons of good stuff added (earthworm castings, bat guano, azomite, biochar, bokashi, nectar for the godz one-shot and myco), plus I'll be growing them with the biotabs line of products, so they will have a good chance. I figure that I'll probably fix up their first batch of PK booster compost tea right away and douche them with it in their first week outdoors. Every little thing I can do to help them strengthen for the oncoming heat they'll experience...probably some extra kelp too... FRIDAY: Still only one of them has emerged, but it looks good so far. FRIDAY 7/5: Still just the one..giving up on the other. Week 2 begins Sunday.