02/04/2022 Day 5 41days old and starting to show their genders, next week will be less plants for sure, identity of a couple males confirmed. Once all girls are confirmed it's straight to flower room.😁 Grape skunk potted up she's tall girl compared to other confirmed grape skunk.

This Blue Dream grow was my best looking one. Can't wait until it's dry to sample it. The P1 clone turned a peach color, and the P2 clone turned purple.

Hi guy its the beginning of week 6 💚 Fed them just ph water today. Usually water every 48h once with nutrients twice ph water with 3ml/lt acti vera.

Everything went well over vacation! The girls are doing okay overall. They needed bigger pots and it's starting to show overall. Another reason not to use autos cause I can't lollipop. But the watering process is going well. The orange isn't doing too hot either in this tent. Small pots. Hopefully starts to look better. I'm considering using synthetic nutrients in this grow to start giving for power. Dimmed to 80% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

😍😍

This week wasn't as bad as last week 😊 Nights were cold 😰, but not to much rain 😿 and a few hours of sun 😍 Temperatures in the greenhouse were medium : during the day 20°C 💀; min temp 3.5°C ; max temp 31,7°C 😤 Cookies Gelato has turned completely purple 👍👍👍 I defoliated the plants 😙 and had to remove budrot (especially in the Cookies Gelatoes)😨 I took the prettiest Cookies Gelato outside for a photo session in my garden 😍 Probably these will be the last pictures of the plans, before harvesting ! 👍😄

Decided to flip to flower this week. Ramped up to 1.1 ec before flipping. Probably a tad too slow since they look hungry. Will slowly increase. Did some more LST to widen them up a more during the stretch. .

Hey guys :-) This week the lady was watered 3 times with 1 l each time. ( Nutrients see table above ) It is developing well and will soon be in bloom 😃. Apart from that, everything was cleaned in a controlled manner and osmosis water was treated. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Beautiful pair of phenos of Badaz og cheese very excited about what strain is gonna offer me in terms of quality buds, so excited to see what is every of this 2 phenos gonna be like, I really hope that both of them have the exact terpenes profile and the same potency! Let's keep on working! We'll the ladies have been Transplanted on February 2nd after 17 days since planted, they were very big and the pot was completely conquered by strong roots as you can see, now both of them are in their new 11l pot home let's see how they keep developing! 💛❤️💚🔝💎

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

We gave her a really good flush (we almost never do this btw), and a fresh top dressing of EWC and her color is starting to come back..new growth looks totally healthy.. really wish she wasn't flowering already but it is what it is.. I also decided to show off our Green Crack in the tote, we're planning to veg her for a long time and with luck fill an entire 4x4 tent..

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Привет друзьям со всех уголков мира. Вот прошла ещё одна неделя. Как вы знаете в начале прошлой недели я начал делать клонов для большого проекта. На протяжение всего времени одно растение показывало больший рост чем другое, но это не мешало мне получать клонов от двух растений. Поэтому на протяжение всей недели я продолжал клонировать растения. После того как я взял нужное количество клонов я обрезал центральный стебель, сломав привычку растения выращивать один центральный стебель. На одном растение я оставил две ветки, а на другом, то что поменьше, оставил три ветки, натянув их нитью чтоб улучшалась их мускулатура. Теперь я оставлю растения в покое, дав им отрастить немного свои ветви. Если вам интересно следить за приключениями травки в России, подписывайтесь на мои дневники!

Nothing wild this week. Just making small adjustments with the light. It's a bigger light than I'm used to so just keeping an eye out. 2 seedlings had the shell attached after 5 days so just used some small tweezers and gently got em off. Everything is as normal as you can expect in the first 7 days. Will start adding a little grow big next week.

Okay, now they are really growing fast. I need to flip to flower!

🍬

Harvesting the cheese auto tonight 😁

Counting down the last week before harvest

All those colors