Notes for flower week 10 (12/22-12/28, days 63 to 69) Can't place side-by-side progressives since website update.... disappointed 😔 Lots of yellow and purple leaves now - SKOL Vikings! Watching the Terps every other day now and feeding reduced nute flush water until harvest. I dont plan to 'fully' remove the nutes, but drastically reduce. Watering Days. All feeds with nutes use either a whole ratio, or combination, of "Veg Mix" and "Bloom Mix"concentrates. These are/will be DILUTED in water until a total ppm of add-in is reached using a (Total Dissolved Solids) TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added-in larger, then smaller, ratios while the "Bloom Mix" concentrate will eventually replace the "Veg Mix" concentrate entirely. The ppm and ratios will be listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 137/67 (last feed was day 132/62) Tested and Calibrated my ph pens. Fed 3 gallons of de-chlorinated tap (starting with 274ppm) mixed with 295ppm of 100% Bloom Mix Concentrate. Due to this soil showing a possible calcium deficit, I am still using 1ml per gallon add-in to test on all plants using this soil, so I added 3.0ml of CaliMagic (General Hydroponics 1-0-0) and then I ph balanced before feeding. The ph on this feed was balanced to 7.0 (6.8 last feed). I used knitting needles to help both aerate the soil and create new water pathways for the roots. I got ~19 cups of runoff (~17 cups last feed). Runoff was tested at 5.96ph and 1640ppm (6.0ph and 1710ppm last feed). Top soil tested at 6.53,6.58,6.57,6.50 for an avg of 6.545 (6.385 avg after last feed)

10/21 #1　 Drying　Day8 #3　Curing　Day38　＠boveda62% #4　Curing　Day41　＠boveda62% #Clone☓1　Curing　Day33　＠boveda62% #Clone☓3　Curing　Day21　＠boveda62% #Clone☓5　Frush #Clone☓4　Frush　short-day Day44 #Clone☓3　short-day Day11 10/24 #1　 Drying　Day11　@140g #3　Curing　Day41　＠boveda62% #4　Curing　Day44　＠boveda62% #Clone☓1　Curing　Day36　＠boveda62% #Clone☓3　Curing　Day24　＠boveda62% #Clone☓5　Frush #Clone☓4　Frush　short-day 47 #Clone☓3　short-day 14 10/25 #1　 Curing　Day2　＠boveda62% #3　Curing　Day42　＠boveda62% #4　Curing　Day45　＠boveda62% #Clone☓1　Curing　Day37　＠boveda62% #Clone☓3　Curing　Day25　＠boveda62% #Clone☓5　short-day 48　Harvest&Drying #Clone☓4　short-day 48　Harvest&Drying #Clone☓3　short-day 15

All Sweet seeds are doing great growing Pretty tall already so very hopeful I think i got the watering of auto under control will see come flowering time i have feeling coming next week they will be starting but that's guessing 24/10/22 Side branches are popping out Great times 26/10/22 Day 26 from seed We got start of flowering 🎉🎉🎉 Let the show begin 5 out the 16 so far soon other will follow @sweetseedsbank Dark Devil Auto®️ flowering Skywalker OG Runtz XL Auto flowering See you next week growmies 🤘🏻 Not a lot to say but move on Happy growings growmies 🤘🏻🤘🏻

Transplanted them into the AutoPots this week, humidity could be higher. Maybe I can turn on the reservoir next week already.

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

Si bien la idea era hacer fertirriegos a lo largo de la semana en dosis separadas para lograr el objetivo, es bueno hacer una pausa para que las raices respiren, eso queda a gusto de cada cultivador, al usar sustrato y no coco. Es necesario degradar toda la comida y arrastrar sales y medir la decantación- Aquí fue con un ph de drenaje de unos 7.2 (siempre es un poco mas alto el excedente) . 3ML por litro para aprovechar en horas lo que con un riego con agua podria tardar semanas. Las enzimas son muy importantes a la hora de hacer que todo se equilibre, en el caso de no tenerlas, solo se recomienda que cada 3 fertirriegos, uno sea con agua lo mas liviana posible.

Video is from 21.09.24 the plants are now loosing fan leaves so much that some neighbours can start to see me again when I have tea on the balcony.

Esta semana fue solamente de flush 🚿 en esta ocasión decidí usar florakleen para ver con cual obtengo mejor resultado si con este o con flawless finish, lo hice así, primero hice un lavado con pura agua con ph de 6.2 lo hice desde el ultimo día de la semana anterior, fue lavado doble, uno en cuanto se encendio la luz y otro justo antes de apagarse, luego empezando esta semana regué dos dias usando el florakleen y ph de 6.2, el tercer día no regué y al final de ese día le di corte ✂️ y la colgué, actualmente ya la tengo curando, la tuve 10 días secándose con una humedad de entre 50 y 60% para un secado lento.

new tent coming soon the auto northern lights stretched double size the color of the leaf i think its light burn or it needs feeding.

Week 17 (23-6 t/m 29-6) 23-6 Temperatuur: 31.2 graden (licht aan) 23.2 graden (licht uit) Luchtvochtigheid: 71% (hoogste) 53% (laagste) Dit is de laatste week bloei, dus geef ik geen voeding meer. Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 24-6 Temperatuur: 31.5 graden (licht aan) 24.2 graden (licht uit) Luchtvochtigheid: 67% (hoogste) 50% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 25-6 Temperatuur: 32.9 graden (licht aan) 25.2 graden (licht uit) Luchtvochtigheid: 72% (hoogste) 47% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 26-6 Temperatuur: 33.5 graden (licht aan) 23.1 graden (licht uit) Luchtvochtigheid: 68% (hoogste) 48% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 27-6 Temperatuur: 31.2 graden (licht aan) 21.7 graden (licht uit) Luchtvochtigheid: 61% (hoogste) 47% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 28-6 Temperatuur: 30.1 graden (licht aan) 22.4 graden (licht uit) Luchtvochtigheid: 75% (hoogste) 47% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 29-6 Temperatuur: 31.4 graden (licht aan) 23.7 graden (licht uit) Luchtvochtigheid: 75% (hoogste) 53% (laagste) Yes! Ze kan geoogst worden! Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4

16 days of slow drying each plant with the environment controlled inside the tent with 2 meters. I have two fans on, pointing at the floor to circulate the air temps - 20 - 23 º humid - 50- 60 %

👍🏾

In

**Wednesday 4/21/2021 - Tuesday 4/27/2021** This week I dropped my A+B nutes from 9ml/Gal to 6ml/Gal and CalMag from 5ml/Gal to 2.5ml/Gal. This is also the one week of using Top Booster. From here on out I'll be using Top Shooter to finish. Overall this week has gone pretty good. I did some medium defoliation on Thursday and Saturday, and took a leaf or two here and there in between. I've been able to keep my humidity in pretty decent shape overall. You'll notice I started taking pictures with my light off later in the week. They do look better that way for sure. I don't have the greatest camera and I'm certainly no photographer. I can't really think of anything else to say really, just keep on trucking to the finish line!

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/27/21 😻 3rd week and 2 of the Gelato are already showing signs of preflower and there's 1-2 "taco leaves" on a couple but this should clear since dropping room temps (we added 2ml/gal of calmag with last watering just to be safe) ..we're hoping for a lot more stretch before full flower.. no defoliation for these girls but we've been tucking leaves daily...the SP-3000 is an absolute beast in that tent, I can't say enough positive things about this light, we're already excitedly talking about our first photo run under the MarsHydro (only 3 months premature lmao!), we're tempted to get a 2nd and eventually run x2, SP-3000's in our 4x4 (a girl can dream lol)..thanks for reading if you made it this far and happy harvests grow fam!!! ❤️🤘😸 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/30/21 😿🔫 I did it again... our timer was switched from "timer" to "outlet" (probably got bumped) this means the plants have been receiving 24/0..i did this about 9 months ago in our basement tent (twice in 1 year, how embarrassing 😿)...these plants being autos I don't suspect that the extra light would matter however our exhaust system is programmed to shut down 30min after the lights..the plants were probably getting too warm for a few hours every night..this solves our "taco leaf" mystery...I'm so happy we caught this when we did ..a few plants were looking deficient so they all got a small shot of grow (2ml/gal) and guano (5ml/g) solution today, we also added a humidifier..its going to be R&R for these girls and I'll be checking all my timers weekly from now on.. ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Week 10 - Second Week of Flowering 🌸 As week two of flowering begins, the garden’s growth is unstoppable! These ladies are thriving, stretching up while staying beautifully vibrant and green. Every inch of this tent is optimized—each plant is soaking up light, nutrients, and water precisely as they need, filling the room with energy. Room Conditions 🌡️ • Temperature: 27.3°C • Humidity: 62.6% • CO₂ Levels: 800 ppm • VPD: 1.36 kPa (excellent range for robust flowering) • Lighting Intensity: 818 PPFD Solution & Medium 💧 • Solution Temp: 21.5°C | TDS: 470 ppm | pH: 6.02 • Medium: Moisture 100% (recently dried to 67%), TDS 510 ppm, Temp 22.5°C The “dry-out” to 67% was a strategic move, helping boost nutrient uptake and root strength. Meanwhile, our slight increase in reds seems to be having the desired effect, nudging these ladies further along in the flowering process. Eye Safety & LED Lighting 🌞🕶️ With powerful LED systems like the ThinkGrow and ICL-300, eye protection is critical. LED grow lights emit high-intensity light across the full spectrum, including intense UV and infrared components that are not easily detected by the human eye. Long-term exposure without adequate protection can lead to eye strain, and in extreme cases, damage to vision. • Blue Light Hazard: LEDs often have elevated levels of blue light, which can harm the retina over time if proper precautions aren’t taken. • UV Protection: Even low doses of UV can accumulate and harm eyes, so grow glasses with UV protection are essential for any indoor gardener. Investing in quality grow room glasses can help protect from glare, UV, and infrared rays, making plant care safer and more comfortable. Lighting Enhancements: ICL-300 In-Depth 🔆 The ICL-300 is our newest addition, specifically designed for inner canopy illumination. This LED offers a targeted light boost under the canopy, enhancing flower growth in lower and shaded areas—ideal for maximizing yield and light efficiency. • Dual Spectrum Technology: The ICL-300 provides a custom spectrum designed to penetrate deeper into the plant canopy, promoting robust bud formation throughout. • Enhanced Light Distribution: With strategically positioned diodes, the ICL-300 reduces shadowing and balances light distribution to all parts of the plant. • Energy Efficiency & Heat Management: This light is designed to be energy-efficient, running cooler and reducing the risk of heat stress within the grow space. The inner canopy light gives the plants exactly what they need, particularly during the flower stage when bud sites deep in the canopy can benefit from more direct exposure. However, after noticing slight leaf burn on some plants, I’ll hold off a bit longer before fully integrating this light to ensure optimal adjustment. Looking Forward 🌟 As we continue dialing in conditions, it’s all about balance, precision, and taking proactive steps to optimize every aspect of the grow environment. We’ll keep a close watch on the canopy height, and next week, I’ll aim to fine-tune the light integration even further with the ICL-300. P.S. - ICL-300 and CO₂ Sensor 🌱 The TrolMaster CO₂ Sensor (MBS-S8) has been crucial for real-time CO₂ adjustments, ensuring the plants get exactly what they need without constant monitoring. Combined with the ICL-300’s spectrum flexibility, these tools make an unbeatable setup, allowing for nuanced control over plant growth and development. As always, a huge thanks to the Grow Fam for the tips, support, and enthusiasm! I’m excited to see what these next weeks will bring as these plants reach their full flowering potential. Stay tuned for more updates, and don’t forget: eye safety first, growers! 🌞🌿 Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

No complaints about these girls this week so far so good.