Defoliation and lst of the four super sour s1 and the 2 peanut butter soufflés as well they are growing great. Flipping to flowering in the next 3-4 weeks

Week 1 of flower is here, gave the lady some compost tea and did some

Planted them direct into the soil about 2mm deep, all four were out within 48hrs and have grown well so far 👍

Just perfect harvest thanks to Platinium for their great fertilizer and to barney's farm for this strain that I recommend a just incredible taste🤤🤤🙏

Welcome to the Dutch Passion Growing Competition 2025! I choose Banana Blaze Auto for competing in this contest. The seeds were given to me by Dutch Passion for free. Thanks! These are my first indoor-grown autoflowers. I am looking forward to fast growth and big headbuds, lets see how the Banana Blaze likes the AutoPots! You will see that the seeds werent put directly in the center of the pots. I am planning on applying LST during the grow and gave myself some space to work with before hand. Stay tuned :) Update day 4: a small miracle happened - all seeds popped up on the same day! And by all I truly mean all, not only the three Banana Blaze Auto, but my two additional plants aswell! With all my autos perfectly synchronized, I can now start on a good note into these grows. Soon all plants exept the Banana Blaze sisters will move outdoors.

D55. Plants are really changing at this point. Calyx’s are getting swollen. Still some clear trichomes.

Well growmies this one is a keeper that's for sure 👈 couldn't of asked for better Genetics 😉 She lead the pack during the entire grow .... Amazing Plant Thanks to Fastbuds for killer Genetics 🙌 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the FC4800 and the MarsHydro UR45 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34

I flipped the switch to 12/12 in the beginning of the week, so I would say this was her first week of flower. She did a little bit of stretching, not too much yet tho, but I consider that a good thing. I can see small white hairs developing, so I'm guessing we've got a liftoff

The ladies light schedule was changed to 12/12 on Oct.30!❤️ The girls were doing great about 1 week after their big defoliation and SCROG being put in, I decided to flip to flower. I had been tucking and bending and had achieved about 80-90% canopy coverage, the last bit should fill in this week as they begin to stretch. During the 1st week of flower transition, I continued to tuck and bend where I could, trying to maintain an even canopy of tops, as well as fill in as many of the squares, as evenly as I can. It becomes a morning and night routine, I check on my humidifier, say good morning, and tuck away for about 5 minutes or so, it doesn’t take much at this point. Once the first week of stretch is through, I stop tucking branches and allow the tops to continue to grow upwards. I find that by using a SCROG method, there isn’t really a whole lot to do…I don’t defoliate until week 3, so it’s just feeding every 3-4 days and filling my humidifier! When I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️

Hi people! I have nothing special to say. you can see everything in the photo! and all this can be summed up in one word! Perfect! it begins to show dark colors in buds, as well as on large leaves from the stem. in the photo this is not yet noticeable, but the eye already sees the manifestations of genetics! and I think that further it will only become more beautiful and more colorful!

0.6g/L

Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Big s/o to @42fastbuds the genetics are solid 😎😎

This is the beginning of week 3 in bud. I’ve decided to not put the ATF plant in my bud room this round. I’m hoping she will just keep growing slow and my clones will eventually catch up with her so they can all go in together next round. The buds have definitely starting to swell up this past week. They all seem to have bounced back from their week 2 lollipopping. I’m very excited for this Melato in the back. She’s obviously outgrown the other 2 strains I have in the room currently. She’s also started throwing off the most smells as well. With some really strong indica OG gas smells. But other than that, everything normal this week. Just plain PHed water every other day. Thanks for checking out the garden. 🤙

Week 4 Light cycle=18/6 Light Power=120w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 58% Low Rh= % Rh step=0% Speed max=7 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.3 DLI aim=28-34 EC aim=1.7 PH aim=6.3 Thur 18/1/24 #2 (Day 22) 📋 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Total volume made=10L Neutralise=0.1ml/L Roots=0.25ml/L Easy Ph down=0ml/L Feed=Water Volume=2.5L Ec=0.2 PH= 6.5/6.6 Time=8.00pm Runoff. Total runoff=120ml Ec=2.28 PH=5.6/ 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 11.00pm Increased light power from 100w to 120w. Fri 19/1/24 #2 (Day 23) 📋 Looks ok Cold spell seems to be going now. Sat 20/1/24 #2 (Day 24) 📋 Lst the 4 colas. H=26cm D=45cm DLI=29.5 Sun 21/1/24 #2 (Day 25) 📋 Broke a cola off and stuck it back on. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=nutes Test run while setting drip rates. Total volume made=12L Total volume left=1L Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=3.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Volume=2.75L (Est) Ec=1.7 PH=6.3/6.4 Time=7.00pm Runoff. Total runoff=3L Ec=4.6 PH=5.6/5.7 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Mon 22/1/24 #2 (Day 26) 📋 H=31cm D=40cm DLI=36.2 Raised light 8cm H=31cm D=48cm DLI=29.0 Snapped cola is recovering. Tues 23/1/24 #2 (Day 27) 📋 Wed 24/1/24 #2 (Day 28) 📋 H=36cm D=43cm DLI=32.2 She is doing OK considering what she been through. So the cola I broke off and grafted back on looks like its going to be fine, I'll have to be careful with it from now on. Back soon. Take it easy.

Dry weight comes later

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.

Today I trimmed the tops of the plants. development is good. Tomorrow I will increase the amount of light. Day 14. Tomorrow I will start spraying with Delta 9 and get ready to start flowering. Let's move on. =)