Flower week 3

I was without a phone this time, but I came back with everything. direct from brazil !!! let's go together. I would like to thank those who follow 🇧🇷🇧🇷🔥

End of Week 1 of flower Plants drill looking healthy They’re growing really well even if the temperature is getting pretty low during night time Merry christmas and Happy growing 🎄💚💚

Cleaned up all the center and bottom growth to get those long, thick colas! Little plant only has 7 main shoots because one was just in the way... Switching them to full bloom nutes on week 3 of flower 😊

Decided after seeing the improvement in the Tangerine Dream to continue with the new feeding schedule, which will include a flush in a few days. She got pretty burnt from the salt based nutes, but her flowers have thickened up considerable over the last few days so I will try to get as much out of her as possible. NCH x SB trichomes are finally beginning to fill out with milk, and several sugar leaves have already gone 30% amber. One more week of flushing and I think I’ll chop her down. Feed pH 6.5, EC 0.9. Flush pH 6.2, EC 0.3.

Sept 20th: (F34) Fertigation once a day with NEW recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 21th: (F35) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 22th: (F36) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 23th: (F37) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 24th: (F38) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 25th: (F39) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 26th: (F40) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off

🍼Greenhouse Feeding BioGrow & Bio Bloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

Great plant. Amazing harvest!!!

For LIQUIDS ******GREEN BUZZ LIQUIDS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

They smell good! Want to chop them and fly away haha

Es wurden alle drei geköpft und zwei im gesamten in die sogenannten DryBags die ja jeder empfehlen tut und die ersten Tests sind sowas von gut ab jetzt nur noch Mit DRYFEM Resultate vom smoke. Kommen noch 🏼👌🏼👍🏼

one week to go! Thats going to be a lot of work

SWISS DREAM ROSE🌹 CBD AUTO KANNABIA SEEDS WEEK #5 Overall June 23rd-30th Week #2 Flower This week I had to adjust the feeding a little as she got a few burn spots on the leaves new organic soil and nutrients so learning what the plant wants and doesn't want. Stay Growing!! Kannabia.com SWISS DREAM RIDE🌹 AUTO

Info : Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 51 since time change to 12/12 h. Hey guys :-) . It's getting nicer in a tent. The lady turns out to be beautiful in the end. The resin is coated all over the bud :-). I changed the whole water again this week. This will last until the end before I will use completely fresh water to rinse out the nutrients 3-5 days before the harvest. Next week I will look at the trichomes every day to determine the perfect harvest time. Otherwise the tent was cleaned and everything checked. Have fun with the update and stay healthy 🙏🏻 You can buy this Strain at www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez X Gelato 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.4 - 6.4 💦 💧

First day flo. Age 8 weeks

Been a little behind on updating this diary sorry, decided to go ahead and throw this lady in the flower tent as well to make room in the Veg tent! Can’t wait to see how this looks at harvest! Thanks for following friends & happy growing!✌️🏼🤙🏼🌱

The plant of course is much more smaller with the restricted root zone causing a bonsai effect. However, she performed really well under the circumstances with a relatively large yield all things considered. I usually smoke high CBD but was very impressed with this high. Let's see how it goes after spending more time under the influence. Review... Growing in the solo cup sized container proved to be much more challenging than a regular grow. The plant soon became stressed dealing with the tiny root zone making everything hyper sensitive. The first issue was showing as tip burn even though the ppm was kept in the 650-850 range. Then the leaves showed a general yellowing overall specially showing at the bottom fan leaves. At this point I was changing the nutrient solution every 2-3 days trying different nutrient brands and concentrations seemingly without much success. It was a nerve wracking period which ultimately lead me back to General Hydroponics with amendments. I did learn that the plant can weather the storm even with less than perfect vegetative leaves while she focuses all her energies into calyx production. It’s was upsetting to see less than stellar health but eventually all the leaves drop and the flowers power on seemingly without issue. The cascading diamond structure developed as a result of a couple broken branches that occurred during the training process in an effort broaden the plant profile with wider lateral spacing. Although initially upset when the fractured branches that withered after being bandaged up and . After removal of said branches it was exciting to see the new possibilities. The cascade formation called for additional side lighting to maintain uniform bud size all the way down the front lower end of the plant. I was looking to create a stadium like effect. The experience of operating the visual hydroponic unit called for a number of practical adjustments along the way. Although initially, very excited with the system concept as an integrated design with nutrient solution supply and gravity drain through the pump, with the air supply inside the pipe with the air bubbler acting as the drain/root filter... in hindsight, obviously, it would not work as the root mass became denser and denser. The first issue, as the path of least resistance, the air was forced back down the nutrient supply pipe. This prevented the pump from priming itself and subsequently no nutrient solution delivery was even possible. As a result, the original air stone was left in place to prevent the roots from entering the nutrient tank and a new bubbler stone simply added to the tank itself. Although the original idea was for the air to be continuously pumping directly through the roots, the flood and drain would actually be just as good when drawing the fresh air in and out with each pump/drain of nutrient solution. The ON cycle was initially set to 10 seconds which eventually became 30 seconds as the roots mass grew denser. This proved to be too unreliable as the fill level was no longer consistent which required constant monitoring to be sure that there was no flooding over and above the container lid. It which case, a simple feeder tube to the top of the root zone was the best option. The ON cycle was set to 5 seconds with a 15 minute OFF interval. Overall the biggest concern was the timer itself, which had several bad reviews for malfunctions with growers losing their plants. However, I have no choice as this was one of the few timers that was capable of cycling down to the second but it all workout fine in that regard… no problem. Was it a perfect grow?... no, definitely not. However, as a relative beginner, it was definitely a great learning experience. Mostly, I need to work on the nutrient blend and concentration. For more control, a backup tank with float valve delivery to maintain the water level for this particular system would be a good idea as well.

Welcome to Flower Week 5 of Sweet Seeds Sweet Mandarine Skittlez F1 I'm excited to share my grow journey with you from my Sweet Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo strain Sweet Mandarine Skittlez F1 : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sweet Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 7weeks • Strain Info: 19-24%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 16 • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 A huge thank you to Sweet Seeds for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!