I was in a hurry to harvest because of the aphids. All buds was washed and finally the affected buds were throw away. The smoke is smooth and nice. im happy of the 82gr

Started flush on the taller plant, smaller one is about a week behind from pistil/trichomes Appearance

All is going well. But noticed the top leaf tips turning brown, raised the lights and will keep an eye on it. Apart from that it has been a standard week.

Chopped on day 133 - trichomes look swollen and ready - leaves faded out. Cut this according to the biodynamic moon gardening calendar and the dates did seem to align with the plant aromatics being more noticeable. Very excited to do the smoke report on this one - focusing on 60% humidity @ 60 degrees for 21 days to retain terpenes and quality.

From Steve seeds/steve Seedbank on facebook. Great service! 1 critical x northern lights Autoflower dropped in a glass of water for 36 hours then right into a 1 gallon final pot. This sprouted extremely fast 1 inch above soil in just 2 days flat! Really excited to see how this strain grows. It should be 1 tasty cross! Stay tuned! If anyone has any tips on this strain please feel free to share. Thanks !

Coming along ,stretch not over but slowed

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

5th of november 2021 / DAY 30 👉 The new p.h. seems effectiv, uploaded x18 time laps 👉 👽Calmag 1 ml/2L + 👽 Bio-Heaven 1 ml/2L 👽Bio-Grow 1 ml/2L /// 😇2 L. p.h. 5.8 EC : 0.7 degree 24.8° 👉 Run-off for QuickGreen is : EC 0.7, ph 7.6 20.4° QuickPink is : EC 0.6 ph 7.8 20.2° QuickBlue is : EC 0.5 ph 7.6 20.2° 😥I give up, p.h is increasing. I don't know what to do, but to me they are dead. I will keep doing what I do, but I don't know how to fix this p.h issue. If I have to give them 6 litters per plant with a ph 3 to try to reach a 5.8 p.h. again.😥 6th of november 2021 / DAY 31 👉 1L per plant : Water + ph down : 3.ph. run-off : 6.0-6.1 +1L per plant : 👽Calmag 1 ml/3L + 👽 Bio-Heaven 2 ml/3L 👽Bio-Grow 3 ml/3L /// 😇3 L. p.h. 5.8 EC : 1.0 degree 24.8° 👉 Run-off about 6.0 per plant. 7th of november 2021 / DAY 32 👉 Upload photos, checking them. I see some greens, I don't want to give up really, I will see if I will have dwarves again... They are small and sick 8th of november 2021 / DAY 33 👉 I took them down to don't see them suffer more. A bit the hart broken. End of diary... It was an experience.

Plant was transplanted in to 5.5 L pot

10/23: I fed today with One, sweet & sticky, signal, superthrive, silica, and a little ca/mg. 10/27: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, kangeroots, and humic acid.

Day 63...buds fattening up nicely...currently experiencing worst pollution on the planet with AQI of 300+ for most of the week which i fear is affecting growth..,..the buds look a lot browner in the pics, than i reality.. due to the post-apocalyptical tinge to the sky as the sun sets, though the smog

Week 7 , pH Perfect Connoisseur Bloom Part A ( 1 ml/L ) pH Perfect Connoisseur Bloom Part B ( 1 ml/L ) CarboLoad Liquid ( 2 ml/L ) Sensi Cal-Mag Xtra ( 2 ml/L ) Sensizym ( 2 ml/L ) Bio-Heaven ( 2 ml/L ) Big Bud ( 2 ml/L) Nirvana (2 ml/L)

Hello, it’s another week report. All plants grew in height like nuts and gained aprox. 20 cm. The AMG’s Sativa genetics is now coming to all its shine and she’s much bigger compared to Green gelatos. They’ve came into the flowering stage and I expect some big buds as they will be developing. Thanks everybody to stopping by 🙏🤪 Happy growing. Update: made another photo in the tent - what a lovely view. I could sit and enjoy watching these ladies. Have my fingers crossed for AMG to slowly stop growing to the top of my tent 🍀

Estamos en la primera semana de vegetativo, ya que a la anterior se la conoce como semana de germinación. Las plantas empiezan a mostrar las primeras hojas reales por encima de los cotiledones. Cuidado con que la humedad relativa del aire, no sea demasiado baja, lo ideal sería alrededor de un 65%. En esta etapa solo regamos suavemente con agua cada 5 días aprox.

Welcome to Week 3 of the Sweet Seeds Gorilla Girl XL Auto’s grow. It’s been extremely cold here in Canada this last few weeks and these plants are doing their best to survive- not thrive. Although they are healthy and happy, they are just not thriving like my previous Sweet Seeds grow from the fall of 2021. The temperatures are only a few degrees cooler than spring, summer and fall but the humidity is extremely low at this particular time of year- 20-25% at best. Without adding additional humidity via a humidifier, my plants are at the mercy of the dry Canadian winters. Week 3 did not bring the expected growth spurt experienced by the plants in my previous Sweet Seeds grow (the Cream Mandarine XL autos). I have included a side by side comparison photo above to show the massive difference in size between the two SS grows. It’s because of the slow growth that I have decided not to top these plants 👎🏼 I increased the water early in Week 3 to 2.1 litres per plant every 4th day (0.52 of a litre per plant per day). Hopefully these ladies pick up a little over week 4. Mom’s Tip for Week #3- To Top or Not to Top?… Topping is an simple technique used by growers to split the main stalk/stem into two separate stalks/stems. This allows for height control when growing XL strains, encourages lower branch growth creating a more equal canopy height and of course- creates two beautiful, big colas instead of one! But topping Autoflowers has long been the source of great debate so I’m here to clarify Mom’s Do’s & Don’ts when topping autos. Do top your plants if they are healthy, thriving and on track (growth wise) with other growers and any info the breeder’s might provide. Don’t top your plants if they appear unhealthy, simply surviving and behind/slow (growth wise) compared to other growers growing the same strain. Do top your Autoflowers between 3-5 weeks from seed or when your plants have grown as many sets of branches as you desire (usually 4-6 sets of branches or nodes). Don’t top your auto’s beyond the 5th-6th week as they are most likely going into full flower. Do top, prior to or very early on in the pre-flower stretch and don’t top too late in pre-flower or once budding has begun- it’s too late and you’ve missed your opportunity for this grow. Do top your plants if you know what you’re doing and you’ve got the right tools. Believe it or not, I use a sterilized set of nail clippers (dedicated to this job alone) as they deliver a clean, controlled, perfect cut every time. Don’t top your plants if you haven’t done your homework or you haven’t got the right tools. Many people use their fingers but I find they are too large and awkward for such a precise job. More than once I have missed (FIM’d) or taken one of the two baby branches that are supposed to be left behind or simply injured those tiny developing branch sites by accident. Do top your autoflowers if you are growing a large/XL strain in a small/short space. This allows the grower to influence/control the overall height of the plants and creates a more equal/level canopy of foliage and eventually bud. Don’t top your auto’s if you are growing a short, fast flowering strain as this can sometimes stall/stunt them a tiny bit. Some Autoflowers run such a tight seed to harvest schedule that they legitimately cannot afford any interruptions in their growing cycle so check the breeder’s info before you chop. Do have fun with growing your Cannabis and don’t be afraid to try something new. Don’t top your Auto’s expecting to triple your yield though. I have learned that it will change the shape and height of your plants and you’ll end up with less low level, larfy bud but your yields will be almost identical whether you top or not. ✂️✂️✂️

D64 4 days since last watering and lower leaves were drooping, max 3 days between waterings 20L with nutrients D67 20L with nutrients added bamboo support for heavy nugs D70 20L with nutrients

Start the week with nutrients and beastie blooms. End the week with semi flush. Repeat for a few more weeks