Likes
Comments
Share
@Yan420
Follow
🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Hi and welcome to another Kannabia grow! This time I’m running their Apple Fritter (feminized photoperiod). She’s going to veg under 24hr light and be manifolded. Still cleaning the rest of my Candy Cream GF (11.04.25) — going to sow the seed tomorrow (12.04.25) *been lazy, sowed on 14.04.25 🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 --- 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) – Cleaning + flushing the old coco coir. Might need to add another brick. *No new brick needed ✅ This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed:   Micro 10ml   Bloom 0ml   GreenBuzz 10ml   Cal-Mag 60ml   FFJ/FPJ 10ml (new disgusting batch)   pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) – Planted seed in final pot ✅ 16.04.25 (GW1) – Did last tent clean up + setup ✅📸 17.04.25 (GW1) – Seed germinated 🎉📸 — roughly 48hrs in final pot. Solid start👌♥️ 23.04.25 (VW1) – Minimal burnt tips 📸 — not progressing, not a concern. 26.04.25 (VW1) – Started using the new batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml, topped the plant, and added final layer of clay pebbles around the base, trimmed side branches and did LST in preparation for "manifold" 📸 08.05.25 VW3 finished manifold📸 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 15.05.25 VW4 Done defoliation and LST 📸 18-19.05.25 VW5 pruned all the shoots bellow my "mains" and did a full defoliation📸 24.05.25 VW6 increased GreenBuzzBloom to 30ml 04.06.25 VW7 did a cleanup📸 11.06.25 VW8 increase TriPartMicro to 40ml 17.06.25 (VW9) – Final structure pass 💈🌿 Did a clean perimeter prune + removed weak shoots. Ended up with 12 tops, was aiming for less, but she made the call Didn’t fight it, just shaped it the best I could Airflow’s good, structure’s stable 🛑 No more cuts until post-stretch Pics coming shortly 😘 Flip coming soon — we’ll see how she handles it. 20.06.25 VW9 Switched lighting to 12 hours, may the stretch begin 🤞 22.06.25 VW10 Did a good LST session,made some pics, and came to some conclusions and a small change of plans: Originally planned for 8 mains — long, spaced colas and maybe a couple stronger “titans” if she wanted to go that way. But she’s showing me something else, and I’m not here to fight her — just guide her. Now after stretch, I’m keeping side shoots only if they: Fill real canopy gaps Don’t crowd neighboring tops (minimum 15cm spacing) Aren’t growing into walls or toward the next plant Anything too close, too low, or heading into shade gets removed. No point forcing it. Looks like I’ll finish with 14–16 solid tops, depending on how she settles. I’m just trying to give each one enough light and space to stack properly. No overcrowding, no larf — just letting her do her thing with a bit of structure. Increased Tri Part Micro to 50ml as well. 28.06.25 VW11 one week since I flipped to 12/12 and she is stretching nicely, a bit shy in showing pistils compared to the Fantasy Feast regulars I have in the same tent. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 60ml, fpj 30→60ml 19.07.25 FW3 Got some bleached tops, been out and about at job interviews and didn't notice a last minute stretch spurt 😭, should recover fine though plenty of time left 😁 22.07.25 FW3 TriPartMicro 30→20ml , TriPartBloom 60→80ml , GreenBuzzBloom 40→50ml 24.07.25 FW3 Cal-Mag 60→40ml 26.07.25 got thrips but handled them with extra airflow and defoliation. 29.07.25 FW4 GreenBuzzBloom 50→20ml, Home-made FFJ/FPJ (new batch) 60→120ml 31.07.25 FW4 Home-made FFJ/FPJ (new batch) 120→200ml 13.08.25 FW6 CalMag 40 →30ml, GreenBuzzBloom 20→0ml 20.08.25 FW7 TriPartMicro 20→10ml, TriPartBloom 80→0ml, GreenBuzzBloom 0→60ml, CalMag 30→20ml 27.08.25 FW8 GreenBuzzBloom 60→0ml, FinalPartRipen 60ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 30.08.25 FW8 – Fed 5l of #1 → 2l runoff 31.08.25 FW9 until 05.09.25 Harvest day gave plain not pHed tap water in tray (bottom feed) (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50 → 30 → 20 → 10ml = 0.33 ml/L TriPart Grow: 0 ml = 0.00 ml/L FinalPartRipen: 60ml = 2.00 ml/L TriPart Bloom: 0 → 20 → 60 → 80 → 0ml = 0.00 ml/L GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60 → 40 → 50 → 20 → 0 → 60 → 0ml = 0.00 ml/L Cal-Mag: 60 → 40 → 30 → 20ml = 0.67 ml/L Home-made FFJ/FPJ: 10 → 30 → 60 → 120 → 200ml = 6.67 ml/L pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 290 ml per 30 L 🔬 9.67 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Apple Fritter (Kannabia Seeds) 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Species: 50% Indica / 50% Sativa Genetics: Sour Apple × Animal Cookies THC: Up to 25% Effect: Euphoric, relaxing, creative Flavor: Sweet, fruity, pastry notes Flowering: 56–63 days Resistance: High Indoor yield: 450–500g/m² Outdoor yield: 600g/plant Structure: Strong, bushy, dense buds
Likes
5
Share
Well she just keeps surprising me I thought she was close but she just keeps getting bigger and thicker and stinkier so he’ll yeah. She is getting some beastie blooms nothing else at this point.
Likes
15
Share
We've made it to week 3! (10/12/20) I'm very happy with how the girls are going, they have definitely put in a HUGE amount of work over the past 7 days. Plants 3 & 8 are very similar(extremely fat leaves & extra bushy) Plants 1 & 5 are similar (smaller phenos reacting to nutes slightly differently) & Plants 2, 4, 6 & 7 seem to be a cross between the previously mentioned phenos(not too small and not too big/bushy & reacting to nutes fine) Feel free to compare Week 1, 2 & 3 to see the differences. Nutes are staying the same this week, although I will be spacing feedings out a little bit further(18 hours-ish), as well as feeding straight PH'd water once a fortnight. I am contemplating hooking my simple drip-to-waste irrigation system up, although the girls are pretty close to the medium still and the halos sit 5-10cm above the medium, meaning fan leaves would be drooping onto the wet halos, so I'll give it another week and see how they're doing :) Update 11/12/20 - day 22 The girls have beefed up quite a bit over the last 24 hours, I'm really looking forward to seeing a stretch soon :) No feeding today & will water plain ph'd water tomorrow. Update 12/12/20 - day 23 Gave the girls straight ph'd water today with little run off. Veg growth is really starting to boom now, looking forward to seeing where this grow goes! I'm gladly accepting any tips or tricks, as I'm still only a beginner to indoors. Update 13/12/20 - day 24 Girls are looking great today, not much to report. They didn't get a feed or watering today as the medium was still wet after a pure watering yesterday. Update 14/12/20 - day 25 There's been a big increase in growth over the past 24 hours. All the girls besides the 2 smaller phenos look 100% happy, the smaller ones have looked a little weird since day 1(Weird as in colour of the fan leaves look deficient of something, but I'm not sure what. The girls will be getting a full feeding today. There's still no signs of sex but they are feminised seeds. Update 15/12/20 - day 26 Girls are looking happy today. Temps are back to normal after a heat wave in my city(its only going to get hotter from here on out). No feeding/watering today, pots are heavy/wet enough. Started using iphone for photos now, my only lens for my DSLR is useless for most grow related photos. I will upgrade my lens before next grow. I received my new silenced fan today! I couldnt be any happier :) It is a silenced Sigilventus SE-A150J, which I have set-up with a brand new Can-lite carbon filter. I went from a rocket loud eBay fan to a completely silent inline EC fan :D I hope the girls like the silence! Update 16/12/20 - day 27 The girls are continuing to boom! and I'm over the moon about it :D I gave them a full feeding today. I have seen white pistils coming out of calyx's on most of the girls, so i'm hoping they start to flower soon. I'm having weird issues with my humidity, it seems to be fine at 40-50% for 70% of the day, but the remaing 30% of the day it goes up to 60-65%. Temps stay the same in the 5x5 tent, I have ducted air-con in the house which is on most of the day. Thanks for viewing! :)
Processing
Likes
10
Share
Start of week 4, the blueberries had major bud growth during week 3 and they filled in nicely. There are a few signs of deficiency in the larger fan leaves, but overall I'm very happy with how the blueberries are growing. The Super Lemon Haze is showing signs of deficiencies, she's also hungrier than the blueberries, she got an extra 2 liters of nutes at 1/4 mute strength, the last two weeks. She may require full strength nutes in the extra feeding, to help with the deficiencies. Still, bud site development is coming along nicely on the SLH.
Likes
17
Share
@Naujas
Follow
She is much prettier than she was a week ago :) I remembered that I have my first grow light, which is more compact and it will give me more space, so I changed my light, now the girl's side branches get light too:) I add a lot of video memes, because I really want to win Iphone16 pro ;) and those who don't take risks don't drink champagne:) good luck to everyone.
Likes
10
Share
Likes
8
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
5
Share
@Herbie
Follow
Mrs Banner aka Bruce banner #3 aka the Triangle grow, is Budding away nicely. I've given her, her last feed of nutrients so she will be on just water now until harvest. I've been concerned shes a little on the small size but just as the name suggests she starting to "Hulk up." I'm hopefull of a harvest in about two weeks, but with a few grows under my belt, I know that 1) two weeks may turn into six 2) patience wins the grow game
Likes
198
Share
@DevilsBud
Follow
Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks All strains except imperium x/blackberry moonrock are topped and the main got LST clip on i snapped a Branch off one of the hyper glue by being to Hasty the other ones where no problem good week for the 9 plants A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
15
Share
Defoliated her and fed her more guano… first time using Budswell also. It's the dry season here in the Caribbean so i keep watering her daily.
Likes
4
Share
Top dressed with Dr Earth Flower Girl. Slowly but steadily removing foliage and undergrowth. Watering about every 3-4 days. Smelling good. Backing off on the LST for no reason other than than laziness.
Likes
5
Share
Day 46 of Flower, 93 since germination. Starting to check the trichomes with my new wifi microscope. Looks like Lemon Extract has a scattering of amber trichome heads, but only in bud nearest the light. All other look milky and glassy. I'm thinking Lemon Extract might harvest in one week. The others, maybe two weeks. Gave the ladies their last feeding today. Just PH balanced water from here til harvest.
Likes
19
Share
Runtz Muffin has start stretching quickly, I had to add a bamboo stick to avoid problems once the buds get dense. I’m happy with the first days of flowering so far. 1st lollipopping has been done too few days ago to redirect the power in to canopy’s. During this week I’ll add an extra co2 exhale bag to increase the chance of a good day bar buds 🤞🤞🤞🤤🤤
Likes
12
Share
They're surviving, and the flowers are perfects, only the plant is suffering now, but I think that the bio-bloom will do his work. We noticed some peaks where mold had developed, due to the very high humidity of the last few days, so we removed the infected part.
Likes
8
Share
@Smev1337
Follow
This is the end of this journey with my first grow and it turned out pretty good for an newbie grower like me, i let the plant cure properly also to get the maximum out of the terps 😋 i'm really happy with the grow and will continue to grow more and more 😈
Likes
26
Share
I decided it's harvest time for this amazing lady.. Cos she lived on balcony I don't know yet about her ready to use weigh but I gues around 40g dry. Will see in about a week 🙏🌱👀 So I will chop her, and make she ready for drying in RQS hemp dryer. Now I know for a myself that yes u can easily grow half in growbox and flowering outside if needed, 😉 When more ongoing I will update 🙏💚🌱 Happy growing 🙏🌱💚
Processing
Likes
29
Share
@Reaper
Follow
at this week u can compare the stems and bush in the videos, keep in mind this is my first hydro grow and i messed the PPM and PH a few times.. also snapped a whole branch of the hydro plant around week 4. still the hydro plant looks bigger and fatter stem. lol
Likes
32
Share
@Astroboy
Follow
Ztrawberriez growing fast ⏩ Nice easy week with a thunderstorm👍 Time for ztrawberriez to get her first dose of nutirent ... Bloom a bloom b 1ml each per litter.
Likes
52
Share
Day 30 Flower and It looks like my humidity problem is coming to an end 😅 the second unit outside the tent is finally showing some results, I’ve also change my air circulation , i fixed al off them in a way that it creates a wind vortex, i think this is helping with the humidity also. I will post a litle video showing my air set up 😇 As for the rest all is going as normal, today mb tomorrow’s day for new defoliation, apart from that just giving them all my love and care ❤️ Day 31 F defoliation day Day 33 and still in love with my girls 5x White Mango WM 5x Alasken Purple AP 4x Blueberry BB 3x SAD S1 2x Badazz Cookies BC 19 in total for a 4x8x6 - 1,2x2,4x2 Light Lumatek Zeus 465W compact pro 2x at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy and do it for the love Peace ✌️ D
Processing
Likes
16
Share
@GRow_M8s
Follow
Week 7 we increased the bio-grow / bio-heaven to 3 ml/L to provide more N to the plants but they still look like something is missing. More fresh air is provided this week. At the beginning we thought that this light green pale colour on leaves was due to N deficiency or fresh air. After a week of extra N and Fresh air we can say that non of them was what is causing this issue. All these let us believe that our problem is the low temperature as in the end of the dark period temp drops down to 17 c and is likely that soil gets low enough to stress the plants. Effort will be made in week 8 to get them back in good health and switch them to 12/12 as soon as possible. Our auto "noname" strain after a week of watering with just high PH water around 7.5 is back to normal feeding. 2ml/L biogrow/bloom/heaven and 1 ml/L topmax. It's aroma is intense grapefruit/citrus.
Likes
10
Share
@Froggman
Follow
Thickening up nicely! Got some nutrient issues on the LSD, but not nearly as bad a previous grows.