The Grow Awards 2026 🏆
Likes
Comments
Share
10000 ml jeden 3 Tag in der dreiundzwanzigsten Woche pH-Wert: 6,2 EC-Wert: 1,1 mS/cm Temperatur: 24ºC Luftfeuchtigkeit: 60% Schädlingsbekämpfung: / Düngemittel: Sie bekommen ab jetzt Brenneseljauche und Schachtelhalmjauche da sie im Outdoor Bereich ist. Besonderheiten: Wir mussten sie jetzt toppen da sie zu hoch wurde und das Dach berührte, es besteht die Gefahr von Schimmel oder das die Blätter Schlächter wachsen. -Tag 157 Heute wieder gegossen und nochmals etwas Beschnitten, so langsam werden Blüten sichtbar -Tag 159 Sie wächst weiter und bildet immer mehr Blütten 😊
Likes
20
Share
@Robin87
Follow
The stretch in some of these has been crazy, lights been maintained at 30inch also.. the living soil seems to be doing the trick, can’t wait to see what happens the following days with the way there growing, dehumidifier added, maintaining between 60-65%. Temperature also nicely at 20-23c.. untill next week 👊🏻
Likes
12
Share
Aug 2: Tropicana Cookies FF is three weeks younger than my two biggest plants (Sunday Punch EV and Mimosa Shot) and two weeks younger than Lemon Cream Kush. This is a very strong plant and is progressing very well. This wagon with LCK started force flowering a week later than the other wagon and will go another week longer. TC is now the tallest of the four plants despite being the youngest. Aug 5: now done force flowering after 2.5 weeks. Plants in this wagon are getting too big to easily get into garage. Continuing to use far red light as a bloom booster at dusk. Back to 15.5 h of daylight in the backyard now.
Processing
Likes
17
Share
Started the week with a big mid flower feed with NFTG. Also tried to defoliate some leaves blocking some light. She is growing tall for sure. 3 ft tall. Her buds are forming real well ! love this plant. Day 57- NFTG mid flower feed/ Mammoth P/Recharge @ 6.5 Ph Day 58-59 No watering Day 60- Recharge/Cal-Mag/Mammoth P/ Bloom Khaos Feed @6.5ph Day 61- No water
Likes
2
Share
Week 5 Did my second topping on both headbands
Likes
37
Share
Yet again another amazing run from the blue cheese. Barneys really got it right with this strain. Dense, frosty, smelly, Big heads literally everything i look for in a strain. Not too mention the high is the best! I love a good cheese smoke and harvesting this strain just as the trichomes fill with milky cloudy colours I fell gives the best high. Energetic and uplifting and just all around amazing! 10/10 would recommend!
Likes
6
Share
Llegamos al final, este apartado lo finalizaremos cuando probemos la yerba de momento colores rojizos y azulados, huele como a gas junto un transfondo dulce...una pasada merece la pena probarla!⛽🔥
Processing
Likes
29
Share
Likes
6
Share
@humboldtcountysown LLC for Veg&Bloom Thanks Again Phil&Gail! @rocket_seeds Newest Seed Sponsor!!! @vivosun.official VIVOSUN®️ VS2000w & VS1000w Grow-Thank You so Much J Bro! I'm Honored and Very Proud to be apart of your Family/Team! I #FlippedToFlower on Friday 6/24/22 ShoutOut to our Bro @soillife420_2 for Gifting us this VS®️ VS1000w LED Grow Light! Sponsored VS®️ VS2000w LED Grow Light with Samsung LM301 Diodes & Sosen Brand Driver, Dimmable Lights, Sunlike Full Spectrum with Grow Room Glasses for Seedling Veg & Bloom Plant Growing Lamps for 4x2 Veg & 3x3 Flower Grow Tent or Grow space! Lower Cost & High Efficiency: VS®️ VS2000w LED grow lights use the latest LED plant light technology including Samsung LM301 Diodes, high-energy efficiency with 2.9μmol/J; Extremely high output but consumes only 200W of electricity, making it more efficient than traditional HID lamps and other plant lamps on the market! It comes equipped with 3000k Warm white Diodes that Boosts Bloom, 5000k Cool white lights that Promotes Germination and 660nm Red lights for Higher Yields! Thier attached to a Durable, Waterproof Aluminum Heat Sink with Low Noise and only weights 9.03lbs. with a 5 year Warranty! SuperCropped3rdTime #TransPlanted into 3GallonPots from 1GallonPots #Lollipopped ToppedThe3rdTime #LeafTucked Transferred into our 6×5ft. #ChronicCave BasementFlowerArea and Growing under our Brilliantly Bright VIVOSUN®️ VS2000w-VS1000w with the 12/12 lighting schedule, Dimmed⬇️=50% around 30" Over Canopy's We Love to use Team @tnbnaturals @tnb_naturals #TNBNaturals #TheEnhancer #Co2DispersalCanister for Vigorous and Great Growth for our Grows! ShoutOut to Bro @dr._weedman I'm Growing from Team @ilovegrowingmarijuana_strains #HeroMixpack #ILGM #SkywalkerOG-Fem #BruceBanner-Fem #BlackWidow-Fem and started Up a New phenoz of those, my Team @nirvana_seeds nirvanashop.com #Zkittlez-Fem and a New pheno, Team @nukeheads.nutrients #CheetahPiss-Fem clone and from my Wonderful Wife's @juicyjj85 plant, I've taken two Clones from our Bro @goliathgrowshow #GoliathGrower #MacBerries-reg Thanks Again Everyone!!! #BudBrothers4-L Happy Growing! Cheers Famz!!! Much Props and Much Pars!💯VS®️💡's+⛺'s=🏆's #LoveWhatYouGrow #BringGreenToYourLife #vivosun #vs1000 #vivosungrowlight #vivosungrowtent #vs2000 #vs3000 #vs4000 #vs1000e #vsf4300 #hcf1600 #hcf3200 https://linktr.ee/vivosun.official https://www.linkedin.com/uas/login?session_redirect=%2Fcompany%2F77743591%2F https://youtube.com/c/VIVOSUN https://instagram.com/vivosun.official?igshid=YmMyMTA2M2Y= https://www.facebook.com/198734887125319/posts/1724749361190523/?extid=a&mibextid=baczqb https://mobile.twitter.com/VIVOSUN/header_photo https://pin.it/2uORZDs https://www.tiktok.com/@vivosunglobal?lang=en&is_from_webapp=1&sender_device=mobile&sender_web_id=7110614037704197678 https://www.amazon.com/stores/page/A2F7F49B-7130-4423-BF67-59CE3EC5A44F?maas=maas_adg_01A961034EF443FE5006848DB5A6C70B_afap_abs&ref_=aa_maas&tag=maas&ingress=3&visitId=3e0468ed-290c-4c15-9d06-7a22afdff345&mc_cid=e5417eb03f&mc_eid=69bad0aef8 https://www.amazon.com/stores/page/3EDD8CEC-742A-44F6-90C4-0930E78DD730?ingress=2&visitId=6cfb6992-f86f-4c85-a5ad-4cb5d1c06d07&ref_=ast_bln Limited-time deal: VIVOSUN 6-Pair 1/8 Inch Adjustable Grow Light Hanger, Heavy Duty Rope Hanger with Reinforced Metal Gears, 8-Ft Long and 150 lbs Weight Capacity Rope Rachet for Grow Light, Inline Fan https://a.co/d/1WezHcI
Likes
3
Share
She looks good now. The heat for her curling leaves a little with the hot summer days.
Likes
16
Share
@PenguPoop
Follow
Strain: Black Haze ((Sir Jack x Skunk Auto) F6 x Pakistan Chitral Kush) F5 Breeder : Exotic Seed Autoflower 10 Weeks Week 1 (Day 1-7) Planted seed into 1,5 BioBizz Lightmix/ Plagron Perlit and added a few grams Mycotrex Setup:GrowTent: 100x100 Secret Jardin HS100 Exhaust: PrimaKlima PK125WHSP-EC Filter: PrimaKlima K2601-125 ClipFan1: AC Infinity Cloudray A6 ClipFan2: AC Infinity Cloudray S6 Fertilizer: BioTabs / only Water strategy Soil: Biobizz Lightmix + Plagron Perlit
Likes
13
Share
@Aedaone
Follow
This girl was a little slower starting. We had excessive rain. I thought it was going to rot her roots. It didn't. She's handled the wet conditions and is really taken off this week. We had more rain on day 4 then intermittently through the night into day 5. We had cooler temps on day 6 and more intermittent rain that evening and night. Day 7 we again had thunderstorms and rain that night. I added Diamond Brand Ferrous Sulfate at the above listed rate of 2.5 ml/gallon of soil in day 6. I distributed these granules evenly across the top of the soil. Using 7.6 pH well water creates challenges in keeping iron and phosphorus available to the plants. Adding this amendment acidifies the soil and provides a readily available and lasting iron supplement during veg.
Processing
Likes
57
Share
1/17 - 1/24: An excellent week for all the plants. Solid, steady fattening and frosting over. The Zenzations smell amazing.
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
2
Share
Week 7. Did nothing besides putting nutrients und water in the system. Spreaded the plants every 2 days to fill the space. Week 8 will start with 42h of darkness and flip to 12/12 afterwards. From now on I will turn of the far red during lights on period. The canopy is filled so it’s now just beneficial for putting them to sleep or waking them up. Using far red in the early flower time could cause a unwanted stretch. In mid-late flower I am going to use it for the Emerson effect. Conditions of the Grow: 💡 PPFD: 550 umol/m2/s ☀️ DLI: 35.6 mol/day 🌓 Lightcycle: 18/6 h 💨 Humidity: 50-55 % 🌡️ 🌞Daytime Temp.: 21-22 *C 🌡️ 🌙Nighttime Temp.: 18-19 *C 🌡️🌱Leaf Temperature: 20 *C 🌡️💧Water Temperature: 18-19 *C Water TDS: 1000ppm | EC: 2000us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Vegetation Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container
Likes
3
Share
@CalGonJim
Follow
5/5 1AM MONDAY 5/6 4am BPP is looking good....water logged some roots so I will be opening the top today to dry the dirt. 230pm used a rag with a little bleach cleaned the bottom of the tray and sides dried and put everything back. BPP looks happy!!! 5/8 5sm.... BPP id good all others looking nice. letting dirt dry now, turned on the white lights and turn them off by hand around 3 or 4 but leave blue and red on 24/7. Im not consistent with the white lights, if they show stress I go back to just blue and red. 5/9 1am retard robin....if I register this plant as an immigrant retard will I get 3000 a month from the state???!!!???!!! 5/10 Retard Robin....you have failed me for the 3rd or 2nd to the LAST TIME!!! I dont know if she's going to become a viable plant now???? I will plant the last GOAT seed in the same cup, I dont think she's worth saving but a new seed will make for an exciting grow!!!! I put a new seed in!!!.. Just noticed I did NOT open the air vents ...so a little water logged....I did a Rapid Start ..5mL water with a little run off. Opened the vents and put a little USB fan up. 5/11 222am they liked the Rapid Start .4ml L rinse.
Likes
9
Share
@Headies
Follow
So I had a few issue. I over watered early on, took them out the seed tray early, started feeding them a week or two late, no humidifier yet but they recovered well.