Got everything hung up. Stripped the fan leaves and broke down into sections. Run 60/60 or as close as i can get until the stems snap.

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Dutch Passions Shaman Die zwei Schamaninnen entwickeln sich sehr schön. Sie sind auf 75 Zentimeter gewachsen. Ich habe mich gegen das Umtopfen entschieden. Zum Einen, weil ich die beiden mobil halten will und zum Anderen um sie nicht zu stressen. Ich werde die beiden gut beobachten und in den nächsten Tagen mit Kompost, frischem Mulch und Beinwell Jauche nach düngen.

Welcome back to yet another short update☺️ Transplanted and filled with tender care and love 🤗 A bit colder temperatures then inside the veg tent , but I’m not worried at all🤩 Videos show the process, hope you enjoy 💯💚 See you next week🤩 ------------------------------------------------------------------------------------------ Light source: Medicgrow SpectrumX 880W LED Build in PPFD 4 controllable spectrums V1, F1, VS, FS Visit https://medicgrow.com/ for more informaton. Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

Going strong. End of week 3 , gave her a decent tidy up for more light penetration and air flow.

Marijuana cultivation, like any agricultural endeavor, involves various techniques to optimize growth, yield, and potency of the plant. This is the week to make it happen! One such advanced technique is High-Stress Training (HST). HST is employed to control the growth pattern of the marijuana plant, making it more bushy rather than tall. This is beneficial for indoor growers with limited vertical space. Moreover, HST exposes more of the plant's foliage to light, which can lead to enhanced photosynthesis. This results in a plant that can produce more buds, which are denser and more potent. Given that light is a primary energy source for plants, maximizing light exposure can drastically improve the overall quality and quantity of the harvest. Topping is a specific form of HST that involves cutting off the main stem's topmost growth. This method forces the plant to divert its energy and nutrients to the lower branches, promoting the development of multiple main colas instead of a single dominant one. By encouraging a more even canopy, topping ensures that light is distributed more uniformly across the plant. This reduces the chances of having underdeveloped buds at the lower sections of the plant due to light deprivation. Topping also curtails the plant's height, making it more manageable, especially for indoor growers with limited space. HST and topping are integral for modern marijuana growers seeking to enhance their yields. These techniques address the spatial constraints faced by many growers and ensure that the marijuana plant receives optimal light exposure. The end goal of these methodologies is to increase yield and potency, and when done correctly, they can transform a mediocre harvest into a bountiful one. Cultivators who invest time in understanding and implementing these techniques stand to benefit significantly from their marijuana crops.

Beginning of week... Beginning of first flush week! So excited!!! I put 4mL of FloraKleen into 3L of pH'd water.. Going in: 160 PPM.. Runoff: 700 PPM.. I may run 1 more flush of FloraKleen through the medium in the AM.. Will be updating on the runoff as I go.. Just makes better sense to check runoff to me.. I know some people dont do it.. And claim its pointless.. But I think runoff tells you ALOT.. I think the runoff reading is just from what was built into the medium still.. I just like to make sure she's getting nice and flushed for a good while.. And if the trichomes arent where I want them to be at the end of the 2 week flush I will flush for another week.. But only if needed.. Anyways.. Hope these 2 weeks fly by cuz the week before this didnt at all! Lol.. Next day.. Today is day 2 of flushing.. Used FloraKleen once again.. This time the runoff came out at 640 PPM.. Gettin there lol.. Tonight I'm going to just run 3L of pH'd water and same tomorrow morning.. Will update in the AM Later that night.. Lol.. This time the runoff came out at 750 PPM.. I'm guessing its just more nutrients that were built up in there.. Jeez.. So tomorrow I am just going to flush pH'd water in the AM and in the PM.. With more updates on how that goes.. I also lowered the light down to 12 inches from the tallest colas.. According to the PPFD chart Mars Hydro has, the tall colas (but outside of the footprint) should be getting close to 800 PAR and the shorter (but in the middle of the footprint) should be getting.. Roughly around the same I suppose.. The inside branches are still about 14 - 16 inches from the light.. Wish I would have been able to keep the canopy more even.. But I went with a LST technique that helped me keep all the branches instead of removing some.. Like instead of bending the plant over (to make a "T") to where some branches should probably just be removed because they are going straight into the medium lol.. But this time I tried to bend her over a little different (to make an "X") so that all the branches wouldn't be going straight into the medium.. Idk.. something I've been trying to figure out on my own lol.. But I think I prefer the "T" because it is easier to keep each branch, and it's twin, fairly even throughout the grow.. But I'm still happy asf how this grow has gone so far.. Should have lollipopped a bit too.. But I still enjoy smoking every last bit of these ladies.. And if they are too popcorn-ish, I'll just throw them in a bubble bag with the trim.. Still gonna be happy with the outcome either way!!! Autos are fun.. But I think I still prefer to control when flowering begins.. I know a 2×2 isn't ideal for this.. But I really wanna try to ScrOG a girl in this tent! Just to give it a shot and see how much of a difference it can make in yeild.. Anyways.. Will update tomorrow with the runoff and whatnot!... NEXT day after THAT (Almost mid week)... This AM the runoff came out 444 PPM.. Since I already mixed some pH'd water, I'm gonna use it later tonight.. With an update.. Lol Later that night... Runoff is still coming out about 400 PPM.. Decided to check the pH and the runoff is coming out at 7.. The fuck!? Maybe I forgot to pH earlier this week.. Idk. Whatever lol.. Mid week.. Runoff came out at 333 PPM this morning.. Just going to go back to one watering a day till harvest now. Hope I can get it down to 200 PPM or lower for the last week at least.. But still not sure if I will be letting it go an extra week or not.. We shall see how it goes till then.. The nug I attempted to pollinate didnt take.. Guessing the pollen was too old.. Trashed it.. It was feminized pollen but wasnt the greatest genetics either.. So no loss there.. But the nug looks kinda pathetic.. The pic shows it next to its sister nug and that one still looks good.. Maybe cuz Ive been fucking with it alot.. But whatev.. Shit happens.. May still keep updating the runoff daily.. May not.. See how I feel tomorrow lol Next day.. Runoff came out at 330 PPM again this morning.. Not bad, I suppose.. Alot lower than what its been before I started using this Brita filter lol.. May use Florakleen once more at the beginning of the next week.. Then just water till harvest. Just to see if I can get it down a little more. If not, I'm sure it'll be fine. The fan blowing on the undedside of the light slipped off the pole and was chopping away at one of the colas.. Luckily none of the buds were damaged.. Trichomes definately got knocked off tho lol.. And mostly leaf damage.. This girl smells so fucking amazing.. The colors are awesome.. I don't think I can find another strain to top this one lol.. We shall see tho... Almost end of week.. Runoff came down to 280 PPM this morning.. Niceeee.. I can live with that.. As long as it's not 400+ PPM I think it should be fine.. The main top cola is showing a nice amount of cloudy.. And the very bottom 2 stems are cloudy also.. But the rest of the plant seems moslty clear but also have some cloudy/milky along with them.. I can find a few amber in spots.. Will be updating with pics tomorrow along with some trichome shots!!!... End of week.. Today's runoff came out at 260 PPM.. Niceeee.. I tried to get alot of trichome shots but I just don't have a steady enough hand.. A couple colas have some amber coming it on the very top calyxes.. Some colas are cloudy.. Almost there!!! Not sure if I am gonna take this just 1 more week or 2 more weeks.. We will see how she looks at the end of the next week... As for now.. On to the next week!!!...

She’s budding up nicely finally done stretching and starting to smell strong

With good temperatures this week I have seen massive growth changes. No more burnt leaves. I went up with the nutes, the plants see to like it. Added a time lapse to show changes after feeding.

E quasi la fine lascio andare fino a fine settimana per colorare i tricomi

1.4. Buds fatening up, looking good. 34DLI 8.4. Had some problems around, not with plants. I have to discard them, it’s tearing my hearth but it’s what it is.

7I wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smile

For the contest. I got more

Video at the end. Watering: 12.05. 3,70kg - 4,27kg 14.05. 3,6kg - 3,9kg 17.05 3,6kg - 4,6kg (1g green house powder feeding "grow" in 1L of water) The training is going well, I added some force here and there. Plant seems to be happy. I decided to order some powder feeding fertilizer, since the plant is now starting week 4 and is still quite small. Update: 1g greenhouse powder feeding in 1L of water used at the end of week 4.

All going well apart from burnt the tips a little bit with there weekly treats. Nothing to worry about Harvested cosmic queen 5.1.25 70 days Purple lemonade 11.1.25. 77 days

✅ Wedding Cake Auto – Final Harvest Report: Finished harvesting the remainder of my Wedding Cake auto. Main cola was taken earlier at peak cloudy with some early ambers (~10–15%) for a more balanced effect. The rest of the plant was allowed to mature further and came down with roughly 20–25% amber trichomes. Bud density was excellent across the mid and lower branches — structure held up well without support. She was grown fully organic — no synthetic inputs — in living soil amended with bone meal during flower. Dried at ~70°F / 50% RH for a slow 7-day dry. Cure will begin this week in Grove Bags (1 oz size). Aroma leans toward earthy-sweet with some gassy backend as she dries. 👑 Special Queen #1 Auto – Ongoing Flower: This plant has been a beast. She’s in the latter half of flower now with impressive lateral branching and heavy stacking across all colas. Trichomes are mostly cloudy with a few early ambers showing on the top-most bud sites, so I’ll be continuing her for another week or two to hit my preferred heavy amber target for a deeper effect. She’s bounced back from early lockout and transplant stress after being moved into ~8 gal of fresh FoxFarm soil with top-dressed organics. Water-only since week 5, and she’s thriving. 🌿 Notes: This run has really dialed in my process — organic medium, minimal inputs, and clean environment. Next steps will be sanitation, tent reset, and prepping for my upcoming tester autos.

Compre humidificares por aliexpress a bajo costo y mejoro la humedad del indoor.

Going off what other people say about 2x-3x growth during the preflower stretch I decided it's time to flip!

02.08.20 - Starts week 7 according to Seedsman this is a 75-day seed to maturity grow right at 11 weeks, I think we are on track but feel it will push 12 weeks, the stems are loaded with flowers and I am confident they will fell in to produce some very large nugs - exciting to say the least! So tomorrow I pick up my items needed to start brewing compost tea - will shoot a quick video of the process / then will feed with compost tea on Monday / this should carry the plants through harvest. 02.09.20 - Started up my Compost Tea today - Recipe: 2 Cups Worm Castings (Used a Paint Strainer Bag), 1 Tablespoon Kelp Extract, 1 Tablespoon Fish Extract, 2 Table Spoons Molasses, brew for 24/36 hours. 02.10.20 - Today just watered the plants with my first compost tea, it looked amazing, had a beautiful white protein foam on the top - I will have a look at the plant's first thing in the morning and see if they are dancing! 02.11.20 - Just a quick update - plants continue to grow big great genetics! 02.12.20 - Keeping it simple, light watering - temps are good - buds are getting larger - all in all thinngs are looking great!

Благодаря успешной LST , растение доставило больше побегов(я насчитал 12 молодых побегов )и продолжает активно рости ) Стал давать 80% от максимума удобрений Растение чувствует себя хорошо . Ждём