Likes
Comments
Share
Topped the plants this week. I think the soil got a little too dry on the Dos-si-dos toward the end of the week. It started wilting. Keeping a close eye on soil moisture. I think I'll need to water more often as the soil this run is predominantly coco coir.
Likes
41
Share
The girl is progressing well. She is receiving around 25 DLI of light. I did a topping.
Likes
57
Share
It's finally here 😀. Both phenotypes are in the fermentation phase 😍. The grow was a lot of fun, so I thought I'd make an Iolator hash out of leaves and a little bud and a little oil out of both phenotype buds. Cannabis: The grow: Both grew beautifully. Your stretch was normal and it didn't cause any problems. Feeding : You received GHSC bio Grow once in the vegi phase and GHSC Bio bloom twice in the flowering phase. GHSC enhancers were added every 2 weeks. That was just the right amount for both : 1:. Optic: The appearance of Phenotype 1 is almost completely purple 😍. Pheno 2 is coated a bit purple with a mixture of silver from the resin :-). Smell / taste Pheno 1 tastes very fruity. You can really say that it tastes like a tangerine in the finish : 1:. Pheno 2 also tastes a little fruity but with its distinctly stronger note in the Kush direction. Both very tasty : 1:. Storage: The cannabis is stored in glasses in a dark place where the temperature is between 19-22 degrees. The first 2 months of fermentation are boveda packs 62% in the jars. Then the 58% come in. Since I was in the mood for a few specialties again, as mentioned above, I also made Hash Oil and Ice Oilator hash. Let's start with Video 1 (BHO) Hash Oil production: Hash Oil: Process: Small grated cannabis goes into the Dexso tube. Below is a container in the PTFE film that serves as a base so that the oil can be easily removed at the end. At the top we give the Dexso gas through the Dexso tube filled with cannabis. The result is a mixture of the gas and the cannabis oil. We put the bowl with the mixture in a hot shot of water but make sure that no water comes in at the top. We let the whole thing simmer for 20 minutes so that the first gases can evaporate. Then everything goes into the vacuum chamber so that all remaining vapors can really escape and we have a pure product 😁. The whole thing is carried out for 2-3 days until the oil is ready 😀. I can only recommend everyone to vaporize oil in a dabbing rig 😍. Taste: The taste is extremely delicious. In the finish, it tastes much more like mandarin than the buds 😀. Optic: The oil is very shiny to matt. If you pull it apart, it becomes light as honey :-). If you roll it up, it's very conceit. Consistency: The oil will become a little harder in the silicone storage after a short time. However, if you take it in your hand, it can be pulled and kneaded very easily after a few seconds. That was it with the oil production. So let's continue with the Ice o Lator 😀. Making the Ice o Lator: I took all the remains of the leaves and placed them in the small net. Then the IO maker is first made about 1/3 full of cold water with water. I add 3-4 kg of ice cubes and wait about 15 minutes until the water is below 0 degrees. As soon as the temperature is reached, I put in the net with the leftovers and set the timer to 15 / on and 10 / off. I run the whole thing 3 times. Then the complete broth is passed through the sieves (160, 120, 73 and 25) in a bucket. After sifting everything is spread out on a ceramic plate and poked very small with a knife. The whole thing comes in a dark place and is then allowed to dry for about 3-4 days. As soon as the hash has dried, it comes into the press for a few hours at a little temperature. The result is a kneading oily Ice o Lator 😍😍😍. Optic: The optic is partly reminiscent of that of oil :-). Consistency: The ice o lator has a very soft consistency :-). You can roll up small sausages while smoking 😁. Taste: The taste is very medicinal. But very earthy and smoky finish : 1:. All the screenings are very good but the 25 and 73 are the best 😃. That was it with the production to see everything again in Video 2. So we come to the end of a beautiful passage ☺️. Finally, I would like to say that I would like to thank Sweet Seeds for the sponsorship and for providing two such great genetics 🙏🏻. If anyone has any questions about this type, oil or ice, I will answer as soon as I can. I wish you all a lot of fun with this big update :-). Have a nice start to you and your families into the new year and everyone stays healthy 🙏🏻. Let it grow 🍀 MadeInGermany You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) : 1: Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
86
Share
@CANNASIM
Follow
------GENERAL COMMENT------ As planed I lowered the base nutrient to 2ml, and took a break from Cal Mag, to release the N a bit, green is on point now. Tomorrow will catch up with the Cal Mag schedule as usual. Time for some overdrive, for the rest all good, girls are developing well and buds are getting bigger, no issues. Smelling delicious! Hope I had some Terpinator to give a go... ------GG. AK47 COMMENT------ AK47 is developing slower, but with more branches.
Likes
5
Share
Week 8 November 13 -another week and we have flipped to flower about 5 days ago no sign of pistils but the bud sites are starting to lighten up in color -got some nutrient water on some of the leaves last watering so that’s not good -also top watered to get the bloom nutrients to break down for the coming weeks -also rigged this card board cut out to keep the top soil dry so the amendments stay moist enough to break down as I bottom water all the established plants
Likes
14
Share
I know you shouldn't really be defoliating when auto plants are in flower but I had to clear a path for airflow around the bottom of the plant because humidity is high because of the summer months apart from that she is going from strength to strength couldn't be happier would definitely grow Dutch passion again
Likes
8
Share
En su primer dia en el sistema ya podemos ver como aparecen los brotes de estas semas! vamos a ve cómo evoluciona de cara a la primer semana en el sistema. En menos de 24hs ya abrieron las primeras dos, solo falta una que se muestre a la luz! El 21 de marzo apareció con ganas de vivir la ultima semana que faltaba! El 22 de marzo al 5to dia en el sistema ya se puede apreciar la leve diferencia de fenotipos y la vigorosidad entre ellas, apuesto a que este cultivo va a ser diverso y lleno de aprendizaje.
Processing
Likes
7
Share
Likes
50
Share
Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 As soon as I walk into my grow room I can smell them and when I open the tent it's a slap in the face. Though it's a lovely slap it isn't gentle, it's a 'where've you been?' slap. A 'welcome to Caramel city' slap. 😂😂 Jokes aside. This strain's aroma has me "Enamorado". Pictures taken day 42 of flower. The Green Sensation seems to be doing it's job. Buds are really starting to fatten up fast and are looking very very luscious. I should have started using it in week 4 so I'm a week late on that. *Made a little reminder for the next run.* I can't seem to get a good shot of the buds but i'm working on it. Let's see if for next week I can get a good close up. In flower I water with nutrients in every feed and every 10 days or so I water with only water and Enzymes to help break down the old roots, gives life to the microorganisms, helps out the new roots and helps to prevent root rot. It's great if your using mineral nutrients as there's times where those minerals stay stuck to the roots and can cause root burn. I use alga based nutrients so I don't have a problem with that but I like to use it, I've noticed a great difference im flower before and after using. We're getting closer and closer to harvest. 😬 "Sooo exciiited" (In Kevin Hart voice) If you like the content check out the other strains sharing the tent. 😃 I'll catch y'all next week. Take care out there! One love Growers & tokers!
Likes
19
Share
Dropped seeds into water for 24 hours, and acclimated the fabric pots to the tents conditions. One 3gal, one 5gal, and one 7gal are going to be used for this grow to see the different outcomes of pot size.
Likes
5
Share
@Stoolboxx
Follow
9/27/24 - Start of week 5! Had to upload a few pictures so I don't get confused on start date. 10/3/24 - The left plant has started to flower, right one just barely. Not sure what that one will end up doing, probably a week behind the other at this point.
Likes
5
Share
Plant is really hungry,I thought she was finished but she just keeps going. I’m assuming my particular pheno is got to foxtail, buds are growing out the buds ! Wtf, she’s bigs asf her little sister is filling out
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/8- The first full week of flower is here for the FastBuds Strawberry Gorilla auto's and they are all looking fantastic! The feed schedule of six 15 minute feeds daily continues with a 900ppm nutrient level. The HLG 650R remains at 100% output, and is hung 30" from the canopy now as I had to raise it for some taller plants in the tent. 11/10- The Strawberry Gorilla's just hit the one week mark in their flowering and the #2 definitely has the most developed flowers of the three plants, with the #1 and #3's flowers about equal in development. I'm continuing to adjust the LST wires on all three plants to try and keep as much light penetration down into the centers of the plants which has been working well. I have also removed a shade leaf here and there when necessary. 11/12- Today I drained, cleaned the reservoir and distribution bucket, then refilled the reservoir with 90L of 70℉ well water to which Plagron nutrients were added to give a 900ppm concentration, then ph'd to 5.8. All I am doing now in between drain/refills of the reservoir is adding straight water to maintain the 90L level and checking the ph. Over the course of the 7 days in between reservoir changes the ppm's will slowly drop, but will still be adequate, never dropping below 750ppm's. The plants are really doing well in this AirCube system and I'm slowly getting a better handle on its 'in's & out's'. I did also check the ppm's of the return solution to see if there was a wide variance from what was going in, and all was good with only a 50-100ppm difference. 11/14- There goes a full week of flower for the FastBuds Strawberry Gorilla's! They all should really get going in the next couple of weeks and I can't wait to see their progression through flower! 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚