Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.

***** Week 10 growth - February 13 to 19, 2021 - Week 2 Flower ***** Mandarin Mimosa is certainly growing beautifully!!! MM1 has been strong and a taller grower from the start. MM2 however has taken off in stretch.......she is also being grown in a 3gal pot so she will be slightly smaller than MM1. These are 1:1 girls but I am really looking forward to smoking this strain😍👍 The terps should start coming out more over the next couple of weeks, Terpinator being added now as well to assist with aromas. Tips up on these girls almost all day long, they are the happiest in the tent this week😂😂 2nd SCROG layer in now....finally😞 Lots of work to do in cleaning up the lower leaves next week. Will do larger leaf strip and lolipoping when they start focusing more on bud development. Light is at 24” only pulling 310 watt, and the meter at the tops of the girls is roughly 28,500LUX. It is feeling like it’s a little strong for them but it’s close......the curling leaves is slowly increasing on the tops. By the end of the week we are at 400watts and reading 38,500LUX, this should be roughly 980 umol/s/m2.......over 900 and less than 1,000.......should be good for going into week 3. Nutrients switched over to flower schedule and following week 2.....but so-called back a couple of items. Adding some other items beyond IPP line so backing off some of the ppm to compensate. Still only one “feeding” per week. Early flower so hitting the microbes a little harder this week and next and then slowly start backing off. I like Remo’s Natures Candy for sweetener because it has humic, sweetener and old school molasses, amongst other things to feed the microbes as they are in coco. Bud Fusion being used now for pk boost.........no more “red kool-aid”😂 Still adding Rezin from Green Planet becuase it seems to boost my trichome quantity.....Terpinator likely this week as well......increase some of the sulfer to increase aromas. Little more detail....... Feb 13/21 - Day 8 - 3.5L watering with CalMag @ 1ml, Nature’s Candy @ 1ml, Resin @ 1.5ml Feb 14/21 - Day 9 - 2nd SCROG added today.....finally. Plucked a bunch more leaves in the process - watering with microbes only today. Recharge has some molasses in it so just adding that. - 4L water for these girls with Recharge @ 1/2 tsp/gal - 320ppm and 6.0pH Feb 15/21 - Day 10 - today is big feed day....its been 7 days. - 3L each girl with all the IPP line as listed plus silica @ 1ml, Nature’s Candy @ 1ml. (Bud Fusion was 0.2gr/L) - 1325ppm and 6.0pH - Girls gave run off at 3L today so didn’t push past that. Feb 16/21 - Day 11 - some feed left from yesterday so added 6L of plain water to dilute it and watered into the girls tonight. - 3L full feed of nutrients for each girl - 800ppm and 6.1pH Feb 17/21 - Day 12 - 3L each girl with Terpinator and CalMag @ 2ml, Nature’s Candy @ 1ml, Recharge @ 1/2 tsp/gal - 775ppm and 6.1pH - increased light power to 350 watts. Now at 32,500LUX.......take it slow over the next week and keep creeping up. Leaves have a bit of a taco shape coming out and looking fairly serrated at the edges.....pushing the light intensity on the tops👍 - leaf colour on the girls is very good......tips are not burnt either. Feb 18/21 - Day 13 -3L each girl of plain water today - added beneficial bacteria and enzymes @ 1.5ml - 330ppm and 5.9pH - was looking for a little lower pH as I have not been checking runoff. - have to do a leaf strip this weekend......start of week 3. - light power increased again, 400 watts now. Feb 19/21 - Day 14 - day out day.......they have not had one in a bit. - humidity was higher today as door to grow room closed today to assist clones with more humidity. So that takes us through two weeks of flower now. Not knowing these girls enough yet, I suspect feeding will stop at the end of week 6. That leaves four more weeks. I will treat the next two weeks like mid flower for nutes, and the following two weeks as late flower. Feed supplements accordingly. These two girls are very happy and looking like we should get some nice colas from MM1!! They are rocking ETS.......looking forward to seeing the bud swelling next couple of weeks💪👍👊

God guys, so mad I am so disappointed. Cookies seedbank -1000 stars. Die brand cost me so much money. Imagine startet with 16 plants now 6/6 lemon cherry pop are ladyboys. 4/6 hollywoods ladyboys the other two know under control but looking already sus. Tie die 1/3 didn’t sprout 1/3 killed today because ladyboy the other one also under control and looking sus. Only last real men fighter is Trump Runtz. It’s so sad grow looked pretty good and know noting left.

What up fam, weekly update on these ladies. So far they've dealt with the heat like champs. Thankfully I got my AC fixed and it's back up and running. So thank God as we're having a heat wave still with day temps in the high 90's. They're getting fed 16oz of fed daily. It's looking like maybe another week or two before they'll get harvested. All in all Happy Growing.

Nice old school style growth pattern . Love the lemon scent .

Day 57: Watered each plant with 1L with nuts 1588 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1690 ppm, 3595 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 60: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC Day 62: Watered each plant with 1L with nuts 1726 ppm, 3712 us/cm, 3.7 EC (purple punch, strawberry banana, wedding Cheesecake)(I gave them more than usual, by mistake) 1528 ppm, 3525 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 63: Watered each plant with 1L with nuts 1563 ppm, 3325us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1523 ppm, 3301 us/cm, 3.3 EC (gorilla cookies) 2 different feedings for the 10 plants Day 65: Watered each plant with 1L with nuts 1518 ppm, 3210 us/cm, 3.2 EC (purple punch, strawberry banana, wedding Cheesecake) 1359 ppm, 2891 us/cm, 2.9 EC (gorilla cookies) 2 different feedings for the 10 plants Next feeding I will start to flush some plants, 1st week with flawless finish, 2nd week clean water, 10x the pot, 150L each Day 67: Watered each plant with 1L with nuts 1379 ppm, 2908 us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1250 ppm, 2687 us/cm, 2.7 EC (gorilla cookies) 285 ppm, 606 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Started to flush all the strawberry banana and 2 purple punch with flawless finisher. (1st week flawless finisher, 2L each, 2nd week clear water, 150L)

Dos si dos 33 naissance le 7 février, passage en floraison le 24 avril. Plante vigoureux tige forte tout va bien pour le moment...rempotage une semaine avant le passage en floraison dans un pot de 30 litre, mélange de batmix, humus de lombric,terre et guano chauves-souris. Arrosage seulment à l'eau du robinet, que j'ai laissé reposer 24heure,arrosage entre 2 et 3 jours environ 2.5 litre d'eau.

ACOP was a small and bushy one.. I was a bit worried about her in the beginning of her grow becouse she was germinated with her root in a knot (im not even kidding.. i wish i made a pic of that, it was a funny sight 😁) So she had to fight to keep up with the rest but after i added some canna zym and PK 13-14 in the mix..then she finally 'perked up' a bit and started to show off her sparkly, orangy buds! She smells really nice, but i got to say.. i have got a soft spot for oranges (especially the sparkly ones !😁👊) Smoke review: this one does not only gives me inspiration to write and paint.. it even gives me the energy and focus to do it! Its an hybrid, they say its 50/50.. Im not gonna argue with that ofcourse but for me, its not one i can't vape before night time..(usually i can, even with hybrids of 50%) yes, i feel my body relaxing and my chronic pain fades into the background but still .. i cant get to sleep But that does not mean im not loving her! i Just needed something like that: something to keep me focussed and at the same time, very medicinal so i can get some stuff done! finally😁👏 (luckily i have few indicas for bedtime 😎👍) BIG thnx DUTCH PASSION for letting me try this seed!🙏 happy growing for all ✊

Strain: Fast Buds – Banana Purple Punch Auto RF3 (2 Plants) Grow Type: Indoor Pot Size: 4 Gallon Fabric Pots Medium: Coco Coir Nutrient Line: Athena Harvest Log Got these girls down and dried, and this time I only managed to get pics of the more orangish pheno but trust me, both of them came out properrr. This one in particular had that nice green base with bright orange amber pistils , really nice once trimmed up. They hung for about 12 days and dried out just right. Buds held their shape, came out dense and solid, and trimming wasn’t a fuss at all. I knew from early that they were going to be some bangers I already dipped into a little sample and yeah… same story as the other pair straight gassss 😮‍💨. Strong smoke, hits quick. Even before a full cure, it’s already smoking nice. Even though this run didn’t give me the biggest plants, I can’t complain at all. The quality is there, the smoke is there, and that’s what really matters. I’d run this again without thinking TWICE!! Drying Conditions 🌡️ Temperature: ~20–22°C 💧 Humidity: ~55–60% ⏱️ Dry Time: ~12 Days Another one wrapped up 🔥 Use my code ISLANDT for 15% off at Fast Buds

All 3 plants cut and just Ozz remaining to dry and trim. Terrible outcome for #4 as I had to throw more than half of the plant away due to bud rots. I’m still really confused about what happened: the day before harvest I noticed and removed 3 bud rots from the plant - so far so good. All remaining buds were fine, but when trimming I realised every single top was maroon-ish at the base and I could clearly see a start of mold when opening some of them. Although I could clearly confirm what it was with a 30x lens, the white spots were extremely scarce and small (less than 1x1mm each time). It doesn’t seem really coherent with how it should have spread. Nonetheless, I didn’t take risk and threw away any bud where I could identify white mold with the lens, and put aside the ones where I had a doubt in pop corns (the “7g maybe”, cf below) to track the evolution.

THC Bomb auto has been growing really well under the Spider Farmer 100 watt SF-1000 light. Well on its way to becoming a monster. Has been stretching all week and more signs of flowering are becoming present. Been raising the light as stretching continues. I have increased bloom and bloom booster. Will likely sep nutrition up more in a few days. Thanks again Spider Farmer. 🤜🤛 Thank you everyone in the GD community for your support. Please like, and follow along. Extra thanks to my YouTube subscribers as well. Stay safe everyone, and happy growing 🌱🌱🌱🌱🌱🌱🌱🌱

Critical Cure is filling out nicely. Picked most of the inchworms off and have some BT showing up on Monday. She got a ring of Coast of Maine 5-2-4 around her base. I'll have to put up the tomato roof in the next couple weeks!

Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo

Week 3 of flower for White Widow Hard not to love this girls structure to be honest...😍 Also showing purple signs from the could nights i think not ideal. Bottom feeding just over a litre of water a day on her drip tray.

Que pasa familia, vamos con la cuarta semana de crecimiento de estás Zkittelz de Seeds Mafia. Ya a pasado 1 semana desde el trasplante y ya han recuperado la pequeña carencia de nitrógeno que se marcaron. La humedad está alta la mantengo entorno al 55%,y la temperatura la tengo entre los 22/24 grados. Controlamos en ph en cada riego a 6.2. Y el agua que utilizo de riego suele estar estancada entre 24 / 36 horas. El tetra 9 que añadí esta semana fue vía foliar. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

End week 3 plants still looking healthy. Removed couple fan leaves blocking bud sites. Temps getting hot outside in spring so tent temps have gone up but still in range to thrive. Humidity is mostly the easiest to control

I've been bad at updating on here, harvested on January 13th. Super frosty and sticky.

1 savaitė :) viskas atrodo gana gerai, nors kol kas augimas lėtas :) Kitą savaitę persodinsiu į paskutinį vazoną :) sėkmės visiems :):) ...