Está semana le tocó solo agüita con un poquito de cal gel .....

D71/FD43 - Sooo...its all gone a bit to dick this week! So, as noted before, Oscillating RAM fans keep blowing on me. Just stop dead and haven't got a chance to get down the 90miles to get them replaced again. Well, noticed a few leaves that looked like they may be a bit light coloured...only 1 or 2, at the top buds which is strange and not really an N deficiency...so I looked more closely....4 buds with the dreaded fur on them!!! Fucking Bud Rot!!! Ones closest to the door that would get the biggest temp differential (So the weirdest humidity) and no air really getting round them!!! Talk about a SICKNER! This grow just seems to be blighted (literally) with something new every 3 weeks!!! So, had to chop a few tops and now going to be on the defensive for the next few weeks. We're not yet ripe and *hoping* as these had the least air movement round them, the spores didn't get about the place!!! Worst as well is the height of all the plants...cant get the UVB bulb in there for fear of burning them but that would potentially sterilise the fungus (I'd usually be using a 10K finisher this week but with the change to LED...) so now to work out what to do. Also didn't help that I didn't put the lid on my tank right last night doing a check and think i pumped about 10L of water about the place!!! Yip, today was a disaster!!! So, apart from that, I've dropped the Silicon and changed to TNC bactorr for my root inoculant (Out of great white). Apart from that, happy growing all!!! 💪

Hi. I have good news - my plant began to bloom after 2 weeks of vegetation. This is good news and you can already see small flowers The smell is minimal - a little mint with sweet aromas. All branches are covered with inflorescences. I am very happy with the fast flowering. Now I will do defoliation of large leaves. I will add more Blooms and PCs to plant diet this week. i will keep light same 18/6. PPM: 550 - 650 PH: 6.30 - 6.50

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had a high temperature of 84°F. We had intermittent storms and showers throughout the day that took care of the watering. Day 2 we had a high temperature of 88°F. We had on and off rain and thunderstorms throughout the day. The rain took care of the watering. These are recovering well from the nuclear defoliation. They also responded well to treatment. Day 3 we had a high temperature of 94°F with clear sunny skies. I watered about 5 gallons from the well. I treated these again with Growers Ally fungicide. The warmer nights, blazing sun, and this fungicide have really cleared up that powdery mildew. They've also decided to go all in on flowering. Day 4 we had a high temperature of 94° with sunny skies. Heat index was over a hundred. It was super hot today. I watered twice about 8 gallons total. Everything looked good after treatment. Day 5 we had a high temperature of 95 and partly cloudy skies. I watered twice about 4-5 gallons each time with well water. Day 6 we had a high temperature of 91°F with partly cloudy skies. I watered twice today 4-5 gallons each pot, each time. Day 7 we had a high temperature of 88°F with sunny skies. I watered 5-6 gallons each pot. This week was a success. The powdery mildew issue has been cleared up. The Growers Ally fungicide worked great. These girls have rooted into the ground through the pots which is helping some of the 100+heat index days. It's hard to keep these pots moist in that kind of heat. Overall it was a great week.

Getting there baby! my hope is to feed them GH Ripen next week then flush a week and be done! ______________________________________________________ My friend "The Defoliator" came by and helped me to see even MORE haircuts to give! I think I've set my Defolate schedule to a bit on week 3, alot on week 6 and a little more on 8 or 9. Buds are looking great and I'm hoping my schedules are going to work! ______________________________________________________ They are drinking it all up and asking for more! Just letting it do its thing at this point!

Vanilla Latte from Huboldt Seed Company seems to be very stron strain! others still going very well...

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

JUL 15- so she needs some defoliation and some general maintenance because she is starting to lean over, but im out of town for another week. She had some nutes given to her this week. Also, her trichombes are very frosty this girl puts out alot of zap. The one in front is a Mexican Sativa strain which I set to flower a day after her. Also have some Habaneros in the Tent they are awesome they love the Nutes

Since last week, the bush has continued to grow nicely again. A few days ago, I added about 10g of Bio Grow because I noticed slight deficiencies. After mixing this into the soil with Bio Enhancer, it looked healthier again in the following days. Now it has another 1-2 weeks of growth, and then the good plant will start flowering!

Day 72: 600W LED, 18 hours on 6 hours off the same with ventilation. Water intake also remains the same 200ml per day. Humidity approx 35 percent. Day 74: I have to start flushing next week is harvest time :*

90x60x140 (Mars Hydro) FC-E4800 (Mars Hydro) Easy2go Aquavalve5 (Autopot) Living Soil (Demetearth) Bruce Banner (PEV Seed) Gorilla GG4 (Ganja Farmer) Cream Caramel (Sweet Seed) Gorilla Gelato (Ganja Farmer) Blueberry (00 Seed) Kalini Asia (Zamnezia) Biscotti Mintz (Barney's Farm) Blackberry Cake (Sensi Seed) Amsterdam Amnesia (Dutch Passion) Gelato Cookie (Ganja Farmer) Purple OG Punch (Ganja Farmer) Sweet ZZ (RQS) Rainbow Road (Paradise Seed) Substrat ~50L: 30L Super Light Mix Biotechnologie 18L coco 2L perlite 1,7kg lombricompost 350g guano de chauve-souris 350g Zéolithe 350g Basalte 170g guano vers de farine 170g biochar 0,7g Endomychorise glomus intraradices 0,7g Bacillus Amyloliquefaciens Paillage de luzerne alfalfa Arrosage avec 2ml/L de mélasse de canne 1x par semaine Pulvérisation avec 1% d’huile de neem

hello growmies! day 51 finally the pre-flowers begin to appear. I apologize for the few photos but unfortunately they really filled the box and I find it difficult. overall I have to say they look in perfect shape! I will keep you updated thanks for passing by. like and comment! good day and beautiful growth to you 🌳🌱

Day 64 (6/20) about to feed Day 65 (6/21) looking good Day 66 (6/22) Day 67 (6/23) will water tomorrow Day 68 (6/24) watered plain Day 69 (6/25) Day 70 (6/26) plants are looking great. Can see the buds getting more dense. I think having the bottom light will prove to be beneficial for those lower buds.

I still have to go thru all the photos but wanted to get the video up for all of them first. If your interested in the pics come back at the end of today and they will be up it just takes a while. Noticing more seeds poppin thru, I hope it's from the moonshine cookies pollen cuz the female turned out bomb and the male wasnt too bad either so they might be decent seeds. Started the flush on the citradellic and the other ones might have got their last feed yesterday. Should be finishing up next week and the week after. These are so frosty but seeded, looking.like they could be chopped next week so I'll start the flush. Need a break from uploads I'll get the citradellic and mandarin done soon

Not going to go into much detail on the individual plants this week since there is nothing exciting to report. Only note this week is something we all pretty much know already. Organics and hydroponics dont play well together! I was using gringo Rasta calmag and it clogged all my feed lines. I ordered some calimagic so this wont be an issue anymore. Everyone is growing well and stretching quite a bit. I started spreading a couple of them into the scrog and gave them some maxibloom. I will increase it as I lower the maxigro over the next couple weeks. Pretty boring right now, but stick around a few weeks and that might change.